. Eckelman, C. A. 2003. Textbook of product engineering and strength design of furniture.West Lafayette (IN): Purdue University Press.
. Yildirim, M.N., Önder, T.O.R., and Karaman, A. (2018). The Bending Moment Resistance of Corner Joints Reinforced with Glass Fiber Polymer. Kastamonu Üniversitesi Orman Fakültesi Derg, 18(3): 350-356.
. Smardzewski, J. (2002). Technological heterogeneity of adhesive bonds in wood joints. Wood Science and Technology, 36(3): 213-227.
. Dalvand, M., Ebrahimi, G., Haftkhani, A. R., and Maleki, S. (2013). Analysis of factors affecting diagonal tension and compression capacity of corner joints in furniture frames fabricated with dovetail key. Journal of Forestry Research, 24(1): 155-168.
. Dalvand, M., Ebrahimi, G., Tajvidi, M., and Layeghi, M. (2014). Bending moment resistance of dowel corner joints in case-type furniture under diagonal compression load. Journal of Forestry Research, 25(4): 981-984.
. Taj, M. A., Najafi, S. K., and Ebrahimi, G. (2009). Withdrawal and lateral resistance of wood screw in beech, hornbeam and poplar. European Journal of Wood and Wood Products, 67(2): 135-140.
. Kasal, A. (2008). Effect of the number of screws and screw size on moment capacity of furniture corner joints in case construction. Forest Products Journal, 58(6): 36-44.
. Rajak, Z., and Eckelman, C.A. (1996). Analysis of corner joints constructed with large screws. Journal Trop Forest Product, 2(1): 80-92.
. Çinar, H., Atar, M., and Üstündag, A. (2019). The Impact of Dovetail Angle in Single Dovetail Joints on Diagonal Compression Strength of Corner Joints for Box-Type Furniture. Forest Products Journal, 69(2): 131-140.
. Yıldırım, M. N., Karaman, A., and Uslu, E. (2020). Determination of shear force capacity of H-type box furniture joints connected with different demountable type of connection elements. Journal of Adhesion Science and Technology, 34(8): 867-876.
. Krzyżaniak, Ł., and Smardzewski, J. (2019). Strength and stiffness of new designed externally invisible and demountable joints for furniture cases. Engineering Structures, 199: 109674.
. Jones, A., and Lutes, R. (1993). Handbook of Joinery. USA: Sterling Press, New York.
. Majewski, A., Krystofiak, T., and Smardzewski, J. (2020). Mechanical Properties of Corner Joints Made of Honeycomb Panels with Double Arrow-Shaped Auxetic Cores. Materials, 13(18): 4212.
. Demirci, H. İ. (2011). The experimental and finite element analysis of diagonal tensile tests conducted on frame-type constructed corner joints. Technology, 14(1): 11-21.
. Smardzewski, J., Rzepa, B., and Kıliç, H. (2016). Mechanical properties of externally invisible furniture joints made of wood-based composites. BioResources, 11(1): 1224-1239.
. Hu, W., Liu, N., and Guan, H. (2020). Experimental and numerical study on methods of testing withdrawal resistance of mortise-and-tenon joint for wood products. Forests, 11(3): 280.
. Dalvand, M., and Moradpour, M. (2017). Analysis of stress- strain distribution of dowel and glue line in L-type furniture joint by means of finite element method. Iranian journal of wood and paper industries, 8(2): 297–307.
. Williamson, T.G. (2002). APA engineered wood handbook. McGraw-Hill Professional Publishing.
. Eckelman, C.A. (1993). Potential uses of laminated veneer lumber in furniture. Forest Products Journal, 43:19–24.
. NDS National Design Specification for Wood Construction: With Commentary. American Wood Council, 2015.
. Ross, R.J. (2010). Wood handbook: wood as an engineering material. USDA Forest Service, Forest Products Laboratory, General Technical Report FPL-GTR-190, 2010: 509 p.
. Standard Test Methods for Mechanical Fasteners in Wood, Annual Book of ASTM Standard, D 1761, 2000.