Abbasnezhad Alchin, Ahmad Preparation and estimating of evapotranspiration maps based on Landsat 8 satellite data and SEBAL model in Hyrcanian forests
(Case study: Pol-Sefid and Kiasar forests) [Volume 73, Issue 3, 2020, Pages 259-270]
Aghajani, Hamed Relationship between environmental variables and ectomycorrhizal fungi of beech trees in Sangdeh forests, Mazandaran province [Volume 73, Issue 1, 2020, Pages 87-96]
Akhavan, Reza Inter-specific competition of juniper trees in Kandiragh forest reserve using O-ring statistic and mark correlation function [Volume 73, Issue 2, 2020, Pages 189-200]
Alhaj Khalaf, Mhd.Wathek Ability and Sensitivity Study of Spectral Indices for Wildfire Severity Mapping (Case Study: Arabdagh-Golestan Reforestations) [Volume 73, Issue 1, 2020, Pages 97-110]
Amani, Naghmeh Effect of using activated sludge, cationic starch and nano-chitosan on physical and strength properties of old newspaper recycled pulp [Volume 73, Issue 3, 2020, Pages 365-378]
Amanzadeh, Beitollah Yield comparison of different poplar species and clones in Guilan province [Volume 73, Issue 2, 2020, Pages 201-211]
Aminian, Hedayatollah The effect of alkali treatment and different amounts of resin on the physical and mechanical properties of particleboard made from bagasse [Volume 73, Issue 3, 2020, Pages 343-351]
Ashori, Alireza Use of cellulose nanofibers modified with phthalimide for adsorb of particulate matters less than 2.5 microns [Volume 73, Issue 3, 2020, Pages 333-342]
Astaraii, Alireza Effects of ectomycorrhizal fungi on phosphorous uptake and growth of Alnus glutinosa seedlings in Guilan province [Volume 73, Issue 3, 2020, Pages 295-304]
Azadfallah, Mohammad Topochemical modification of bagasse fiber with surface carboxymethylation [Volume 73, Issue 1, 2020, Pages 51-62]
Azizi, Soghra Effect of inoculation of two mycorrhizal fungi and two growth-promoting rhizobacteria on improvement of characteristics of Myrtus Communis L. seedlings under drought stress [Volume 73, Issue 3, 2020, Pages 271-281]
B
Babaie Kafaky, Sasan Tree spatial pattern determination by satellite data, object-based classification and O-ring function (Case study: Sangedeh forest - Sari city) [Volume 73, Issue 2, 2020, Pages 235-246]
Bagheri, Rasool Effect of type and thickness of core on mechanical properties and thermal conductivity transfer of SIP made of poplar OSB [Volume 73, Issue 4, 2021, Pages 467-478]
Baharlouei, Farzaneh The effect of alkali treatment and different amounts of resin on the physical and mechanical properties of particleboard made from bagasse [Volume 73, Issue 3, 2020, Pages 343-351]
Bayatkashkoli, Ali Assessment of the most important efficiency indicators of poplar sawmills in Khalkhal [Volume 73, Issue 2, 2020, Pages 121-137]
Bazrafshan, Javad Preparation and estimating of evapotranspiration maps based on Landsat 8 satellite data and SEBAL model in Hyrcanian forests
(Case study: Pol-Sefid and Kiasar forests) [Volume 73, Issue 3, 2020, Pages 259-270]
Beyranvand, Maryam Non-additive effects of European black pine (Pinus nigra Arnold) and tree of heaven (Ailanthus altissima Mill.) mixed leaf litters on decomposition and nutrient dynamics of leaf litters [Volume 73, Issue 3, 2020, Pages 305-315]
Borhani, Ali Relationship between environmental variables and ectomycorrhizal fungi of beech trees in Sangdeh forests, Mazandaran province [Volume 73, Issue 1, 2020, Pages 87-96]
D
Darvish Sefat, Ali Asghar Preparation and estimating of evapotranspiration maps based on Landsat 8 satellite data and SEBAL model in Hyrcanian forests
(Case study: Pol-Sefid and Kiasar forests) [Volume 73, Issue 3, 2020, Pages 259-270]
E
Ebadi, Eshagh Effect of using activated sludge, cationic starch and nano-chitosan on physical and strength properties of old newspaper recycled pulp [Volume 73, Issue 3, 2020, Pages 365-378]
Ebrahimi, Ghanbar Mechanical properties of natural fiber/polypropylene, foamed and reinforced with spherical carbon nanoparticles for application in automotive industry [Volume 73, Issue 2, 2020, Pages 177-187]
Ebrahimi, Morteza The role of olive leaf extract and nanoparticles incorporation in polyacrylate coating structure on surface properties of heat treated wood during natural weathering [Volume 73, Issue 1, 2020, Pages 1-12]
Ebrahimpour Kasmani, Jafar Utilization of nano-ligno-cellulose to be replaced with the imported long- fiber pulp in durable paper made from waste lint pulp [Volume 73, Issue 2, 2020, Pages 151-162]
Emaminasab, Mohammad The potential of Juniperus foetidissima Willd. tree and Juniperus oblonga M.B. shrub for dendroclimatology in Arasbaran forests [Volume 73, Issue 3, 2020, Pages 353-363]
Erfani, Sohrab Influence of functionalized nano-alumina on improving melamine paper properties [Volume 73, Issue 2, 2020, Pages 139-150]
Erfani, Sohrab Evaluation of writing and copy papers compared with decorative paper with using functionalized nanoalumina in the production of melamine laminate veneer [Volume 73, Issue 4, 2021, Pages 455-466]
Esmaeilpour, Mohammad Effect of soil physical and chemical properties on tree cover diversity and structure in Marivan Qamyshlh forests [Volume 73, Issue 2, 2020, Pages 225-233]
F
Faezipour, Mohammad Mehdi Influence of alkaline and boiling water pretreatment on the structural and surface wettability of biocomposite fabricated of pretreated palm fiber-thermoplastic starch [Volume 73, Issue 4, 2021, Pages 479-490]
Fallah, Asghar Determination of the optimal sample plots size and shape in Arab-Dagh forests, Kalale city, Golestan province [Volume 73, Issue 1, 2020, Pages 111-120]
Fallah Nosrat Abad, Alireza Effect of inoculation of two mycorrhizal fungi and two growth-promoting rhizobacteria on improvement of characteristics of Myrtus Communis L. seedlings under drought stress [Volume 73, Issue 3, 2020, Pages 271-281]
Faraji, Farshid The effect of alkali treatment and different amounts of resin on the physical and mechanical properties of particleboard made from bagasse [Volume 73, Issue 3, 2020, Pages 343-351]
Farrokhpayam, Saeed Reza Mechanical properties of light weight sandwich panel with recycled paper core [Volume 73, Issue 1, 2020, Pages 39-49]
Farrokhpayam, Saeid raza Assessment of the most important efficiency indicators of poplar sawmills in Khalkhal [Volume 73, Issue 2, 2020, Pages 121-137]
G
Ghasemi Abhbash, Farhad Non-additive effects of European black pine (Pinus nigra Arnold) and tree of heaven (Ailanthus altissima Mill.) mixed leaf litters on decomposition and nutrient dynamics of leaf litters [Volume 73, Issue 3, 2020, Pages 305-315]
Ghasemian, Ali The production of bisulfite pulp from Carpinus betulus species to enhance the strength properties of CMP pulp- Case Study: Mazandaran Wood and Paper Industries [Volume 73, Issue 1, 2020, Pages 27-38]
Ghavidel, Akbar Effect of soil physical and chemical properties on tree cover diversity and structure in Marivan Qamyshlh forests [Volume 73, Issue 2, 2020, Pages 225-233]
Ghiasi, Farhad Determination of the optimal sample plots size and shape in Arab-Dagh forests, Kalale city, Golestan province [Volume 73, Issue 1, 2020, Pages 111-120]
Ghods khah, Mehrdad Yield comparison of different poplar species and clones in Guilan province [Volume 73, Issue 2, 2020, Pages 201-211]
Gholami Barzoki, Zahra Topochemical modification of bagasse fiber with surface carboxymethylation [Volume 73, Issue 1, 2020, Pages 51-62]
Gholamiyan, Hadi Identifying and evaluating the characteristics of the superchrome and fantachrome coatings in the furniture industry [Volume 73, Issue 2, 2020, Pages 163-175]
Gholampoor, Behnam Identifying and evaluating the characteristics of the superchrome and fantachrome coatings in the furniture industry [Volume 73, Issue 2, 2020, Pages 163-175]
Ghorbanzadeh, Neda Spatial variability of available nutrients in poplar (Populus deltoides) plantation using different geostatistical methods [Volume 73, Issue 3, 2020, Pages 283-293]
H
Hamzeh, Yahya Optimizing the brightness and mechanical strength of tissue paper made of deinked pulp using isolated soy protein and chitosan by using response surface methodology [Volume 73, Issue 4, 2021, Pages 491-502]
Hashemi, Mahsa Short-term effects of water bar construction on soil physical properties of skid trail after logging operation [Volume 73, Issue 2, 2020, Pages 213-224]
Hedjazi, Sahab Optimizing the brightness and mechanical strength of tissue paper made of deinked pulp using isolated soy protein and chitosan by using response surface methodology [Volume 73, Issue 4, 2021, Pages 491-502]
Heidari Safari Kouchi, Abouzar Comparing the effect of Frankia nodules and urea fertilizer on biomass and amount of nutrients of alder saplings [Volume 73, Issue 4, 2021, Pages 417-425]
Heshmati, Siavash Modeling cardinal temperatures and germination behavior of seeds of Parrotia persica C.A. Meyer as affected by temperature and breaking dormancy treatments [Volume 73, Issue 4, 2021, Pages 427-437]
Heydari;, Hatef Utilization of nano-ligno-cellulose to be replaced with the imported long- fiber pulp in durable paper made from waste lint pulp [Volume 73, Issue 2, 2020, Pages 151-162]
Hodjati, Seyed Mohammaf Relationship between environmental variables and ectomycorrhizal fungi of beech trees in Sangdeh forests, Mazandaran province [Volume 73, Issue 1, 2020, Pages 87-96]
I
Izadyar, Soheila Topochemical modification of bagasse fiber with surface carboxymethylation [Volume 73, Issue 1, 2020, Pages 51-62]
J
Jafari, Mohammad Evaluation of changes in soil physical, chemical and biological properties 25 years after skidding operations in Kheyrud forest [Volume 73, Issue 4, 2021, Pages 403-415]
Jahdi, Roghaye Ability and Sensitivity Study of Spectral Indices for Wildfire Severity Mapping (Case Study: Arabdagh-Golestan Reforestations) [Volume 73, Issue 1, 2020, Pages 97-110]
Jonoobi, Mehdi Use of cellulose nanofibers modified with phthalimide for adsorb of particulate matters less than 2.5 microns [Volume 73, Issue 3, 2020, Pages 333-342]
Jourgholami, Meghdad Study of the influencing factors on the early snow damage in the natural forest stands (Case study: Patom district in Kheyrud forests) [Volume 73, Issue 1, 2020, Pages 77-86]
Jourgholami, Meghdad Evaluation of changes in soil physical, chemical and biological properties 25 years after skidding operations in Kheyrud forest [Volume 73, Issue 4, 2021, Pages 403-415]
K
Kahneh, Ehsan Effects of ectomycorrhizal fungi on phosphorous uptake and growth of Alnus glutinosa seedlings in Guilan province [Volume 73, Issue 3, 2020, Pages 295-304]
Kahneh, Ehsan Comparing the effect of Frankia nodules and urea fertilizer on biomass and amount of nutrients of alder saplings [Volume 73, Issue 4, 2021, Pages 417-425]
Karimi, Abdollah Assessment of the most important efficiency indicators of poplar sawmills in Khalkhal [Volume 73, Issue 2, 2020, Pages 121-137]
Khaleghi, Alireza Effect of mycorrhiza application on some physiological and biochemical characteristics of Quercus brantii saplings under drought stress conditions [Volume 73, Issue 4, 2021, Pages 389-402]
Khavazi, Kazem Effects of ectomycorrhizal fungi on phosphorous uptake and growth of Alnus glutinosa seedlings in Guilan province [Volume 73, Issue 3, 2020, Pages 295-304]
Kiaei, Majid Effect of using activated sludge, cationic starch and nano-chitosan on physical and strength properties of old newspaper recycled pulp [Volume 73, Issue 3, 2020, Pages 365-378]
L
Lakzian, Amir Effects of ectomycorrhizal fungi on phosphorous uptake and growth of Alnus glutinosa seedlings in Guilan province [Volume 73, Issue 3, 2020, Pages 295-304]
M
Madhoushi, Mehrab Mechanical properties of natural fiber/polypropylene, foamed and reinforced with spherical carbon nanoparticles for application in automotive industry [Volume 73, Issue 2, 2020, Pages 177-187]
Madhoushi, Mehrab Effect of type and thickness of core on mechanical properties and thermal conductivity transfer of SIP made of poplar OSB [Volume 73, Issue 4, 2021, Pages 467-478]
Maghsudloo, Mohammad Karim Structure of intact mixed broad-leaved stands in Hyrcanian Forests
(case study: Loveh, Golestan province) [Volume 73, Issue 4, 2021, Pages 439-453]
Mahdavi, Saeed Utilization of nano-ligno-cellulose to be replaced with the imported long- fiber pulp in durable paper made from waste lint pulp [Volume 73, Issue 2, 2020, Pages 151-162]
Malakani, Amin Mechanical properties of natural fiber/polypropylene, foamed and reinforced with spherical carbon nanoparticles for application in automotive industry [Volume 73, Issue 2, 2020, Pages 177-187]
Maleki, Keyvan Modeling cardinal temperatures and germination behavior of seeds of Parrotia persica C.A. Meyer as affected by temperature and breaking dormancy treatments [Volume 73, Issue 4, 2021, Pages 427-437]
Malekigolandouz, Mostafa Assessment of the most important efficiency indicators of poplar sawmills in Khalkhal [Volume 73, Issue 2, 2020, Pages 121-137]
Mansouri, Hamid Reza Mechanical properties of light weight sandwich panel with recycled paper core [Volume 73, Issue 1, 2020, Pages 39-49]
Mastouri, Akbar Influence of alkaline and boiling water pretreatment on the structural and surface wettability of biocomposite fabricated of pretreated palm fiber-thermoplastic starch [Volume 73, Issue 4, 2021, Pages 479-490]
Mataji, Asadollah Tree spatial pattern determination by satellite data, object-based classification and O-ring function (Case study: Sangedeh forest - Sari city) [Volume 73, Issue 2, 2020, Pages 235-246]
Mazhari, Mahbobeh Effects of ectomycorrhizal fungi on phosphorous uptake and growth of Alnus glutinosa seedlings in Guilan province [Volume 73, Issue 3, 2020, Pages 295-304]
Modares Sanavi, Seyed Ali Mohammad Effect of inoculation of two mycorrhizal fungi and two growth-promoting rhizobacteria on improvement of characteristics of Myrtus Communis L. seedlings under drought stress [Volume 73, Issue 3, 2020, Pages 271-281]
Mohammadi, Jahangir Determination of the optimal sample plots size and shape in Arab-Dagh forests, Kalale city, Golestan province [Volume 73, Issue 1, 2020, Pages 111-120]
Mohammadi, Shilan Effect of soil physical and chemical properties on tree cover diversity and structure in Marivan Qamyshlh forests [Volume 73, Issue 2, 2020, Pages 225-233]
Mohammadi Roozbahani, Maryam Accumulation of heavy metals (lead and nickel) by the soil and leaves of Albizia lebbeck and Conocarpus erectus from the city of Ahwaz [Volume 73, Issue 4, 2021, Pages 379-387]
Mohebby, Behbood The role of olive leaf extract and nanoparticles incorporation in polyacrylate coating structure on surface properties of heat treated wood during natural weathering [Volume 73, Issue 1, 2020, Pages 1-12]
Moradpour, Payam Experimental investigation of the behavior of joints by glued- in steel and glass fiber reinforced plastic rods parallel to poplar wood grain [Volume 73, Issue 1, 2020, Pages 63-75]
Mortazavi, Mohammad Structure of intact mixed broad-leaved stands in Hyrcanian Forests
(case study: Loveh, Golestan province) [Volume 73, Issue 4, 2021, Pages 439-453]
Mousavi Coopar, Seyyed Abdollh Yield comparison of different poplar species and clones in Guilan province [Volume 73, Issue 2, 2020, Pages 201-211]
N
Naghdi, Ramin Short-term effects of water bar construction on soil physical properties of skid trail after logging operation [Volume 73, Issue 2, 2020, Pages 213-224]
Najafi, Abdollah Effect of using activated sludge, cationic starch and nano-chitosan on physical and strength properties of old newspaper recycled pulp [Volume 73, Issue 3, 2020, Pages 365-378]
Naseri Monfared, Hona Accumulation of heavy metals (lead and nickel) by the soil and leaves of Albizia lebbeck and Conocarpus erectus from the city of Ahwaz [Volume 73, Issue 4, 2021, Pages 379-387]
Nikooy, Mehrdad Short-term effects of water bar construction on soil physical properties of skid trail after logging operation [Volume 73, Issue 2, 2020, Pages 213-224]
Nourolahi, Seyede Sara Structure of intact mixed broad-leaved stands in Hyrcanian Forests
(case study: Loveh, Golestan province) [Volume 73, Issue 4, 2021, Pages 439-453]
O
Oladi, Reza The potential of Juniperus foetidissima Willd. tree and Juniperus oblonga M.B. shrub for dendroclimatology in Arasbaran forests [Volume 73, Issue 3, 2020, Pages 353-363]
Petrič, Marko The role of olive leaf extract and nanoparticles incorporation in polyacrylate coating structure on surface properties of heat treated wood during natural weathering [Volume 73, Issue 1, 2020, Pages 1-12]
Pourbabaei, Hassan Investigation on structure, physiognomic and habitat needs of Mediterranean cypress (Cupressus sempervirens var. horizontalis) in Eshkevar of Rahimabad, Rudsar, Guilan province [Volume 73, Issue 2, 2020, Pages 247-258]
Pourbabaei, Hassan Spatial variability of available nutrients in poplar (Populus deltoides) plantation using different geostatistical methods [Volume 73, Issue 3, 2020, Pages 283-293]
Pourhashemi, Mehdi Structure of intact mixed broad-leaved stands in Hyrcanian Forests
(case study: Loveh, Golestan province) [Volume 73, Issue 4, 2021, Pages 439-453]
Pourkakroudii, Fateme Investigation on structure, physiognomic and habitat needs of Mediterranean cypress (Cupressus sempervirens var. horizontalis) in Eshkevar of Rahimabad, Rudsar, Guilan province [Volume 73, Issue 2, 2020, Pages 247-258]
Pourtahmasi, Kambiz The potential of Juniperus foetidissima Willd. tree and Juniperus oblonga M.B. shrub for dendroclimatology in Arasbaran forests [Volume 73, Issue 3, 2020, Pages 353-363]
Puryafar, Payam Effect of mycorrhiza application on some physiological and biochemical characteristics of Quercus brantii saplings under drought stress conditions [Volume 73, Issue 4, 2021, Pages 389-402]
R
Rafati, Maryam Accumulation of heavy metals (lead and nickel) by the soil and leaves of Albizia lebbeck and Conocarpus erectus from the city of Ahwaz [Volume 73, Issue 4, 2021, Pages 379-387]
Rahimizadeh, Naimeh Tree spatial pattern determination by satellite data, object-based classification and O-ring function (Case study: Sangedeh forest - Sari city) [Volume 73, Issue 2, 2020, Pages 235-246]
Rashidi, Alimorad Mechanical properties of natural fiber/polypropylene, foamed and reinforced with spherical carbon nanoparticles for application in automotive industry [Volume 73, Issue 2, 2020, Pages 177-187]
Resalati, Hossein The production of bisulfite pulp from Carpinus betulus species to enhance the strength properties of CMP pulp- Case Study: Mazandaran Wood and Paper Industries [Volume 73, Issue 1, 2020, Pages 27-38]
Rezayati Charani, Pejman Influence of functionalized nano-alumina on improving melamine paper properties [Volume 73, Issue 2, 2020, Pages 139-150]
Rezayati Charani, Pejman Evaluation of writing and copy papers compared with decorative paper with using functionalized nanoalumina in the production of melamine laminate veneer [Volume 73, Issue 4, 2021, Pages 455-466]
Roohani, Mehdi Topochemical modification of bagasse fiber with surface carboxymethylation [Volume 73, Issue 1, 2020, Pages 51-62]
Rostamikia, Younes Inter-specific competition of juniper trees in Kandiragh forest reserve using O-ring statistic and mark correlation function [Volume 73, Issue 2, 2020, Pages 189-200]
Rostampour Haftkhani, Akbar Reinforcement of flexural performance of screwed cross laminated timber (CLT) panels constructed of poplar by aluminum sheet and glass fiber reinforced polymer wrap [Volume 73, Issue 3, 2020, Pages 317-331]
Rudi, Hamid Reza Optimizing the brightness and mechanical strength of tissue paper made of deinked pulp using isolated soy protein and chitosan by using response surface methodology [Volume 73, Issue 4, 2021, Pages 491-502]
S
Saadatnia, Mohammad Ali Evaluation of writing and copy papers compared with decorative paper with using functionalized nanoalumina in the production of melamine laminate veneer [Volume 73, Issue 4, 2021, Pages 455-466]
Saadatnia, Mohammad Ali Influence of functionalized nano-alumina on improving melamine paper properties [Volume 73, Issue 2, 2020, Pages 139-150]
Sadeghefard, Amirhossein Influence of alkaline and boiling water pretreatment on the structural and surface wettability of biocomposite fabricated of pretreated palm fiber-thermoplastic starch [Volume 73, Issue 4, 2021, Pages 479-490]
Sahebi, Mahmod reza Tree spatial pattern determination by satellite data, object-based classification and O-ring function (Case study: Sangedeh forest - Sari city) [Volume 73, Issue 2, 2020, Pages 235-246]
Salehi, Ali Short-term effects of water bar construction on soil physical properties of skid trail after logging operation [Volume 73, Issue 2, 2020, Pages 213-224]
Salehi, Ali Investigation on structure, physiognomic and habitat needs of Mediterranean cypress (Cupressus sempervirens var. horizontalis) in Eshkevar of Rahimabad, Rudsar, Guilan province [Volume 73, Issue 2, 2020, Pages 247-258]
Salehi, Ali Spatial variability of available nutrients in poplar (Populus deltoides) plantation using different geostatistical methods [Volume 73, Issue 3, 2020, Pages 283-293]
Salehi, Ali Comparing the effect of Frankia nodules and urea fertilizer on biomass and amount of nutrients of alder saplings [Volume 73, Issue 4, 2021, Pages 417-425]
Salehi, Mansour Yield comparison of different poplar species and clones in Guilan province [Volume 73, Issue 2, 2020, Pages 201-211]
Samdaliri, Hassan Study of the influencing factors on the early snow damage in the natural forest stands (Case study: Patom district in Kheyrud forests) [Volume 73, Issue 1, 2020, Pages 77-86]
Sazmand, Seyed Sajad Optimizing the brightness and mechanical strength of tissue paper made of deinked pulp using isolated soy protein and chitosan by using response surface methodology [Volume 73, Issue 4, 2021, Pages 491-502]
Sefidi, Kiomars Effect of soil physical and chemical properties on tree cover diversity and structure in Marivan Qamyshlh forests [Volume 73, Issue 2, 2020, Pages 225-233]
Sepahvand, Sima Use of cellulose nanofibers modified with phthalimide for adsorb of particulate matters less than 2.5 microns [Volume 73, Issue 3, 2020, Pages 333-342]
Shataee, Shaban Ability and Sensitivity Study of Spectral Indices for Wildfire Severity Mapping (Case Study: Arabdagh-Golestan Reforestations) [Volume 73, Issue 1, 2020, Pages 97-110]
Shirvany, Anooshirvan The potential of Juniperus foetidissima Willd. tree and Juniperus oblonga M.B. shrub for dendroclimatology in Arasbaran forests [Volume 73, Issue 3, 2020, Pages 353-363]
Shokrvand Shakiba, Ali Reinforcement of flexural performance of screwed cross laminated timber (CLT) panels constructed of poplar by aluminum sheet and glass fiber reinforced polymer wrap [Volume 73, Issue 3, 2020, Pages 317-331]
Sohrabi, Hadi Evaluation of changes in soil physical, chemical and biological properties 25 years after skidding operations in Kheyrud forest [Volume 73, Issue 4, 2021, Pages 403-415]
Soitani Tularood, Ali Ashraf Spatial variability of available nutrients in poplar (Populus deltoides) plantation using different geostatistical methods [Volume 73, Issue 3, 2020, Pages 283-293]
Soltani, Elias Modeling cardinal temperatures and germination behavior of seeds of Parrotia persica C.A. Meyer as affected by temperature and breaking dormancy treatments [Volume 73, Issue 4, 2021, Pages 427-437]
T
Tabari Kouchaksaraeai, Masoud Effect of inoculation of two mycorrhizal fungi and two growth-promoting rhizobacteria on improvement of characteristics of Myrtus Communis L. seedlings under drought stress [Volume 73, Issue 3, 2020, Pages 271-281]
Tabarsa, Taghi Effect of type and thickness of core on mechanical properties and thermal conductivity transfer of SIP made of poplar OSB [Volume 73, Issue 4, 2021, Pages 467-478]
Tajick Ghanbary, Mohammad Ali Relationship between environmental variables and ectomycorrhizal fungi of beech trees in Sangdeh forests, Mazandaran province [Volume 73, Issue 1, 2020, Pages 87-96]
V
Vatani, Asghar Experimental investigation of the behavior of joints by glued- in steel and glass fiber reinforced plastic rods parallel to poplar wood grain [Volume 73, Issue 1, 2020, Pages 63-75]
Vaziri, Vahid The effect of alkali treatment and different amounts of resin on the physical and mechanical properties of particleboard made from bagasse [Volume 73, Issue 3, 2020, Pages 343-351]
Veysi, Ramin Effect of using activated sludge, cationic starch and nano-chitosan on physical and strength properties of old newspaper recycled pulp [Volume 73, Issue 3, 2020, Pages 365-378]
Z
Zahedi Tabarestani, Ahmadreza The production of bisulfite pulp from Carpinus betulus species to enhance the strength properties of CMP pulp- Case Study: Mazandaran Wood and Paper Industries [Volume 73, Issue 1, 2020, Pages 27-38]
Zalnezhad, Hamed Study of the influencing factors on the early snow damage in the natural forest stands (Case study: Patom district in Kheyrud forests) [Volume 73, Issue 1, 2020, Pages 77-86]
Zarea Hosseinabadi, Hamid Experimental investigation of the behavior of joints by glued- in steel and glass fiber reinforced plastic rods parallel to poplar wood grain [Volume 73, Issue 1, 2020, Pages 63-75]
ZarehHossien Abadi, hamid Influence of alkaline and boiling water pretreatment on the structural and surface wettability of biocomposite fabricated of pretreated palm fiber-thermoplastic starch [Volume 73, Issue 4, 2021, Pages 479-490]
