[1] Hermawan, A., Ohuchi, T., Fujimoto, N., & Murase, Y. (2009). Manufacture of composite board using wood prunings and waste porcelain stone. Journal of Wood Science, 55, 74-79.
[2] Zhuge, Y., Qian, H., Zheng, X., Huang, C., Zhang, Y., Zhang, M., & Sundell, J. (2018). Residential risk factors for childhood pneumonia: a cross-sectional study in eight cities of China. Environment International, 116, 83-91.
[3] Trianoski, R., Iwakiri, S., Machado, L., & Rosa, T.S.D. (2017). Feasibility of Cordia trichotoma (Vell.) wood and its by-products for particleboard manufacturing. Journal of Sustainable Forestry, 36(8), 833-846.
[4] Shalbafan, A., Tackmann, O., & Welling, J. (2016). Using of expandable fillers to produce low density particleboard. European Journal of Wood and Wood Products, 74, 15-22.
[5] Aydin, I., Colakoglu, G., Colak, S., & Demirkir, C. (2006). Effects of moisture content on formaldehyde emission and mechanical properties of plywood. Building and Environment, 41(10), 1311-1316.
[6] Pizzi, A. (1994). Advanced wood adhesives technology, CRC Press, New York. USA. .
[7] Selakjani, P.P., Dorieh, A., Pizzi, A., Shahavi, M. H., Hasankhah, A., Shekarsaraee, S., & Abatari, M. N. (2021). Reducing free formaldehyde emission, improvement of thickness swelling and increasing storage stability of novel medium density fiberboard by urea-formaldehyde adhesive modified by phenol derivatives. International Journal of Adhesion and Adhesives, 111, 102962.
[8] Salem, M.Z.M., & Böhm, M. (2013). Understanding of formaldehyde emissions from solid wood: An overview. BioResources, 8(3), 4775-4790.
[9] Colakoglu, G. (1993). Effect of the production parameter on formaldehyde emission and technical properties of plywood (Doctoral dissertation, PhD thesis, KTU Graduate School of Natural and Applied Sciences, 21 p., Trabzon).
[10] Guler, C. (2015). Production of particleboards from licorice (Glycyrrhiza glabra) and European black pine (Pinus nigra Arnold) wood particles. Scientific Research and Essays, 10(7), 273-278.
[11] Youngquist, J. (1994). Literature review on use of nonwood plant fibers for building materials and panels. Literature Review on Use of Nonwood Plant Fibers for Building Materials and Panels. US Government Printing Office, 146 p.
[12] Copur, Y., Tozluoglu, A., & Karademir, A. (2007). Pulping of licorice (Glycyrrhiza glabra): an alternative raw material to produce pulp. Cellulose Chemistry and Technology, 41(2/3), 155.
[13] Mahlegha, G.H., & Khosravipour, B. (2017).
The importance of licorice plant cultivation and its challenges in Iran, International Conference on Agricultural Sciences, Medicinal Plants and Traditional Medicine, Mashhad, Iran.
https://civilica.com/doc. (In Persian)
[14] Zahedi Tabarestani, A. (2010, March).
Investigating the chemical and biometric analysis of the fibers obtained from licorice root waste, National Conference of Medicinal Plants, Sari, Iran.
https://civilica.com/doc. (In Persian)
[15] Bilej, M. (2015). Mucosal Immunity in Invertebrates. In Mestecky J., Strober W., Russell M.W., Kelsall B.L., Cheroutre, H., Lambrecht, B.N., (Eds), Mucosal Immunology (Fourth Edition) (135–144). Czech Republic, Acadmic press.
[16] Azizi, S., Pirbalouti, A. G., & Amirmohammadi, M. (2014). Effect of hydro-alcoholic extract of Persian oak (Quercus brantii) in experimentally gastric ulcer. Iranian Journal of Pharmaceutical Research, 13(3), 967.
[17] Pereira, J.A., Oliveira, I., Sousa, A., Valentão, P., Andrade, P.B., Ferreira, I.C., & Estevinho, L. (2007). Walnut (Juglans regia L.) leaves: Phenolic compounds, antibacterial activity and antioxidant potential of different cultivars. Food and Chemical Toxicology, 45(11), 2287-2295.
[18] Zhao, H., Li, X., Wang, X., Meng, M., Wang, X., Huang, S., & Gan, W. (2021). Effect of Copper (II) Sulfate on the Properties of Urea Formaldehyde Adhesive. Polymers, 14(1), 94.
[19] Boran, S., Usta, M., Ondaral, S., & Gumuskaya, E. (2012). The efficiency of tannin as a formaldehyde scavenger chemical in medium density fiberboard. Composites: Part B, 43, 2487-2491.
[20] Aydin, I., Demirkir, C., Colak, S., & Colakoglu, G. (2017). Utilization of bark fl ours as additive in plywood manufac turing. European Journal of Wood and Wood Products, 75 (1), 63-69.
[21] Zhang, J., Kang, H., Gao, Q., Li, J., Pizzi, A., & Delmotte, L. (2014). Performances of larch (l arix gmelini) tannin modifi ed urea-formaldehyde (TUF) resin and plywood bonded by TUF resin. Journal of Applied Polymer Science, 131 (22).
[22] Bai, M., Yao, G. D., Ren, Q., Li, Q., Liu, Q. B., Zhang, Y., Wang, X. B., Huang, X. X., & Song, S. J. (2018). Triterpenoid saponins and flavonoids from licorice residues with anti-inflammatory activity. Industrial Crops and Products, 125, 50-58.
[23] Kim, H. S., Lee, S. Y., Kim, B. Y., Lee, E. K., Ryu, J. H., & Lim, G. B. (2004). Effects of modifiers on the supercritical CO 2 extraction of glycyrrhizin from licorice and the morphology of licorice tissue after extraction. Biotechnology and Bioprocess Engineering, 9, 447-453.
[24] Cameron, F.A., & Pizzi, A. (1985). Tannin-induced formaldehyde release depression in urea formaldehyde particleboard. In: Meyer, B., Kottes-Andrews, B.A., Reinhardt, R.M. (Eds.), Formaldehyde Release from Wood Products, American Chemical Society Symposium Series, No. 316, Washington, DC, Chapter 15, p. 205.
[25] Tan, H., & Colakoglu, G. (2010). The effect of using acorn flour as a fi ller on some mechanical and physical properties of Beech and Okume plywood boards, III. National Black Sea Forestry Congress, 5, 20-22.
[26] Elbadawi, M., Osman, Z., Paridah, T., Nasroun, T., & Kantiner, W. (2015). Mechanical and physical properties of particleboards made from Ailanthus wood and UF resin fortified by Acacias tannins blend. Journal of Materials and Environmental Sciences, 6(4), 1016-1021.
[27] Suleiman, I. Y., Aigbodion, V. S., Shuaibu, L., & Shangalo, M. (2013). Development of eco-friendly particleboard composites using rice husk particles and gum Arabic. Journal of Materials Science and Engineering with Advanced Technology, 7(1), 75-91.
[28] Nemli, G., Kırcı, H., & Temiz, A. (2004). Influence of impregnating wood particles with mimosa bark extract on some properties of particleboard. Industrial Crops and Products, 20(3), 339-344.
[29] Colak, S. (2002). The effects of impregnation procedure at plywood on technological properties, formaldehyde and acid emission of plywood. Doctoral Dissertation, Karadeniz Technical University, Trabzon, Turkey.
[30] Eqbali, H., Mahmoudi, M., Pourrashidi, A., Hosseini, J., Nabati, S., & Hosseini Zhijood, S, M. (2010, March). Antioxidant effects of walnut tree leaves on serum levels of ALP, AST, ALT enzymes in male rats fed with high cholesterol diet. National Conference of Medicinal Plants.Sari. (In Persian)
[31] Eidi, A., Olamafar, S., Zaringhalam, J., Rezazadeh, S., & Eidi, M. (2011). Protective effect of Walnut (Juglans regia L.) extract against CCl4 – induced hepatotoxicity in rats. Research in Medicine, 35(2), 87-92.
[32] Iranmanesh, Y., & Jahanbazi Gojani, H. (2017). Determination of nutritional properties of oil extracted from Iranian oak fruit. Journal of Nutrition and Food Sciences, 15(1), 65-72. (In Persian)
[33] Faramarzian, M., & Bahramikia, S. (2020). Investigation of the effect of Quercus brantii fruit-hull extract on hen egg-white lysozyme fibrilation and defibrillation. Cellular and Molecular Research (Iranian Journal of Biology), 34(4), 499-514. (In Persian)
[34] Gholamalipour Alamdari, E., Keramatlo, M., & Bayat Kohsar, J. (2014). Analyzing the organic compounds of the fruit of two oak species (Quercus castaneifolia and Quercus persica) in the north and west of the country and the effect of impregnation methods with alkaline solution and water on reducing the amount of phenolic compounds. Iranian Plant Ecophysiology, Research Journal, 34(9),1-10. (In Persian)
[35] Saffarzadeh, A., Vincze, L., & Csap, J. (1999). Determination of the chemical composition of acorn, Pistacia atlantica and Pistacia khinjuk seed as non-conventional feedstuff. Journal of Acta Agraria Kaposvariensis, 3, 59-69.
[36] Buyuksari, U., Ayrilmis, N., Avci, E., & Koc, E. (2010). Evaluation of the physical, mechanical properties and formaldehyde emission of particleboard manufactured from waste stone pine (Pinus pinea L.) cones. Bioresource Technology, 101(1), 255-259.
[37] Lee, J., Jeon, J., & Kim, S. (2011). Green Adhesives Using Tannin and Cashew Nut Shell Liquid for Environment-friendly Furniture Materials. Journal of the Korea Furniture Society, 22, 219-229.
[38] Zargaran, A., Mohammadifar, M., & Balaqi, S. (2008). Comparise on of some chemical compositions and rheological properties of Iranian katira gum from two species floccosus A. and rahensis A. Journal of Nutrition Sciences and Food Industries of Iran, 3(4), 9-17. (In Persian)
[39] Rahimi, S., Abbasi, S., Azizi, M & Sahari, M. (2010). Evaluation of some chemical, physical and physicochemical properties of almond gum (Amygdalus scoparia Spach) collected from Fars and East Azarbaijan provinces. National Conference of Medicinal Plants, Sari, Iran. (In Persian)
[40] Dost Hosseini, K. (2006). Technology of production and application of compressed wooden boards., Tehran: University of Tehran Press.
[41] Que, Z., Furuno, T., Katoh, S., and Nishino, Y. (2007). Effects of urea–formaldehyde resin mole ratio on the properties of particleboard. Building and Environment, 42(3), 1257-1263.
[42] Wolcott, J.J., Motter, W.K., Daisy, N.K., Tenhaeff, S.C., & Detlefsen, W.D. (1996). Investigation of variables affecting hot-press formaldehyde and methanol emissions during laboratory production of urea-formaldehyde-bonded particleboard. Forest Products Journal, 46(9), 62.
[43] Halvarsson, S., Edlund, H., & Norgren, M. (2010). Wheat straw as raw material for manufacture of medium density fiberboard (MDF). Bioresources, 5(2), 1215-1231.
)