per
دانشگاه تهران
نشریه جنگل و فرآورده های چوب
5052-2008
2383-0530
2016-11-21
69
3
433
442
10.22059/jfwp.2016.59902
59902
Research Paper
بررسی عوامل تنظیمکنندة نرخ تجزیة لاشبرگ در تودة دستکاشت نوئل خالص منطقة لاجیم
Factors regulating the litter mass loss in pure Norway spruce plantation in Lajim region
فرهاد قاسمی
f.ghasemi@malayeru.ac.ir
1
سید غلامعلی جلالی
gholamalij@yahoo.com
2
وحید حسینی
vahidit@yahoo.com
3
سید محسن حسینی
hosseini@modares.ac.ir
4
عضو هیات علمی دانشگاه ملایر
عضو هیات علمی دانشگاه تربیت مدرس
عضو هیات علمی دانشگاه کردستان
عضو هیات علمی دانشگاه تربیت مدرس
فرایند تجزیة لاشبرگ بهعنوان فرایندی حیاتی در چرخههای بیوژئوشیمیایی مطرح است که طی آن عناصر غذایی لاشبرگ آزاد و وارد خاک میشود. تجزیه و تخریب لیگنین بهعنوان یکی از عوامل محدودکنندة نرخ تجزیة لاشبرگ در مرحلة آخر توصیف میشود. این پژوهش بهمنظور بررسی عوامل تنظیمکنندة نرخ تجزیه در مراحل آخر این فرایند با انکوباسیون لاشبرگ گونههای راش، توسکا، افراپلت و سوزنهای نوئل با استفاده از روش کیسهلاشبرگ بهمدت 405 روز در منطقة لاجیم انجام گرفت. یافتههای تحقیق نشان داد که نرخهای تجزیة لاشبرگها با غلظتهای اولیة نیتروژن و منگنز همبستگی مثبت معنیدار (بهترتیب 05/0 و 01/0 >P) و با غلظت لیگنین و نسبتهای C:N و Lignin:N همبستگی منفی معنیدار در سطح احتمال 95 درصد دارد. همچنین نتایج نشان داد که همبستگی بین مقدار مادة آلی ازدسترفتة لاشبرگها با مقادیر آزادسازی نیتروژن، منگنز و لیگنین معنیدار است؛ این همبستگی تنها در مورد آزادسازی منگنز منفی بود. با توجه به نتایج بدست آمده مشخص شد که ترکیب لاشبرگ گونههای پهنبرگان، بویژه راش با سوزنهای نوئل در جنگلهای کوهستانی هیرکانی میتواند در تسریع روند تجزیه سوزنهای نوئل موثر باشد.
Litter decomposition process is a vital process in forest biogeochemical cycles that cause nutrient release in to the soil. Lignin degradation is considered the limiting step of litter decomposition. This research was done to study the Factors regulating litter mass loss in late decomposition stages, using Beech (Fagus orientalis lipsky), Alder (Alnus subcordata C.A.Meyer), Maple (Acer velutinum Boiss.) and Norway spruce (Picea abies (L) Karst) for 405 days at pure Norway spruce plantation using litterbag method in Lain Region. The finding of this study showed that litter decomposition of all litters significantly had a positive correlation with initial litter Nitrogen and Manganese concentrations (P
https://jfwp.ut.ac.ir/article_59902_4fddabc713a9e510002fc02384925b84.pdf
آزادسازی عناصر
تجزیه لاشبرگ
لاشبرگ
لیگنین
منگنز
leaf litter
Lignin
litter decomposition
manganese
nutrient releasing
per
دانشگاه تهران
نشریه جنگل و فرآورده های چوب
5052-2008
2383-0530
2016-11-21
69
3
443
452
10.22059/jfwp.2016.59884
59884
Research Paper
ارزیابی روش پیشبینی فراوردههای چوبی در طرحهای جنگلداری و تأثیر آن بر درآمد و میزان بهرۀمالکانه (مورد مطالعه: طرح جنگلداری لاویج)
Evaluating the quantitative estimation of wood products in forest management planning and its effect on income and stumpage price (case study: Lavij forest management planning)
حسین علائی
alaeehn@gmail.com
1
هادی معیری
moayeri@gau.ac.ir
2
سعید کیان
kian_1395@yahoo.com
3
سازمان جنگلها و مراتع، دفتر امور بهربرداری جنگل و مرتع
استاد/دانشکده منابع طبیعی دانشگاه علوم کشاورزی و منابع طبیعی گرگان
کارشناس ارشد/سازمان جنگلها، مراتع و آبخیزداری-معاونت امور جنگل
معرفی راهکار علمی مشخص در دستورالعمل تهیة طرح جنگلداری و نیز برنامۀ بهرهبرداری بهمنظور پیشبینی حجم فراوردههای تولیدی دهساله، برآورد میزان درآمد و تهیۀ بیلان اقتصادی طرح از ضروریات است. هدف این تحقیق، ارزیابی روش موجود در توزیع امکان برداشت بین گونههای تشکیل دهندۀ ساختار جنگل و پیشبینی محصولات چوبی در طرحهای جنگلداری و تأثیر آن بر درآمد و میزان بهرۀ مالکانه است. بدین منظور، حجم برداشت، نوع گونههای مورد برداشت و فراوردههای تولیدی پیشبینیشدۀ مندرج در کتابچۀ مصوب جنگلداری و برنامۀ بهرهبرداری با رقمهای متناظر حاصل از عملیات اجرایی دهساله در طرح جنگلداری لاویج بررسی و بهصورت توصیفی - تحلیلی مقایسه شد. نتایج نشان داد که حجم نشانهگذاری به تفکیک گونه، تجدید حجم و فراوردههای چوبی پیشبینیشده براساس دستورالعمل برنامة بهرهبرداری با عملکرد دهسالة طرح مطابقت ندارد. با فرض ثابت نگه داشتن واحد بهای درآمد و هزینه در بخش تولیدات و نیز دیگر هزینههای اجرایی طرح، تغییرات حاصل در نوع گونه، حجم و شکل فراوردههای چوبی تولیدشده، بهترتیب سبب افزایش 29/9 و 03/1 درصدی درآمد و هزینه شد. تأثیر این تغییرات موجب افزایش سهم دولت به میزان 237 درصد و در نتیجه ضریب پایة بهرة مالکانة تنة صنعتی و بهرة هر استر هیزم بهترتیب از 3/5 درصد و 1630 ریال به 03/18 درصد و 4808 ریال تغییر یافت.
Presenting a certain scientific approach in forest management planning and utilization guideline with the aim of prediction of forest wood products for a certain period for estimating the income amount and economical balance of the plan is essential. The purpose of this research is to evaluate the existing method in distribution of harvesting between species forming the forest structure and predicting forest products in forest management planning and its effect on income and stumpage price. So, harvesting volume, type of removal species and the estimated forest products in the approved booklet and harvesting program are compared with corresponding numbers of the ten-year implementation of Lavij forest management planning and the result were presented as descriptive and analytical. The results showed that the marked volume by species, volume renewal and predicted wood products based on harvesting manual are not compatible with ten-year operations of the forestry plan. Assuming that the income and cost indices are fixed in all wood product sectors and other operational costs of this plan, the variations obtained through the species, volume and form of wood products caused increase of income and cost 9.29 and 1.03 percent, respectively. The effect of these variations caused the increase of government contribution amount of 237 percent. Consequently, the base stumpage price of industrial stems and fuel woods changed from 5.3% and 1630 Rails to 18.03% and 4808 Rails, respectively.
https://jfwp.ut.ac.ir/article_59884_94e8957b6503810dce91a4beec27e3e6.pdf
درصد حجمی
دستورالعمل برنامه بهرهبرداری
سهم دولت
شکل محصول
نوع گونه
volume percent
forest harvesting manual
state share
product form
type of species
per
دانشگاه تهران
نشریه جنگل و فرآورده های چوب
5052-2008
2383-0530
2016-11-21
69
3
453
460
10.22059/jfwp.2016.59885
59885
Research Paper
تغییرات فعالیت فسفاتاز و خصوصیات فیزیوشیمیایی خاک در مراحل مختلف تحولی جنگل راش رضوانشهر
Alteration of phosphatase activity and physiochemical properties of soil in different development stages in beech stand (case study: Rezvanshahr)
طاهره علی زاده
talizadeh@rifr-ac.ir
1
محمد متینی زاده
matini@rifr-ac.ir
2
علی صالحی
asalehi@guilan.ac.ir
3
کامبیز طاهری آبکنار
taherikambiz@yahoo.com
4
کارشناسی ارشد پزوهشی موسسه تحقیقات جنگل ها و مراتع کشور
دانشیار پژوهش مؤسسه تحقیقات جنگلها و مراتع کشور
استادیار گروه جنگلداری دانشکده منابع طبیعی، دانشگاه گیلان
دانشیار گروه جنگلداری دانشکده منابع طبیعی، دانشگاه گیلان
مفهوم تحولپذیری در اکوسیستمهایی مانند اکوسیستم جنگل، سه مرحلة اولیه، بلوغ و پوسیدگی [D1] را شامل میشود. در هر کدام از مراحل تحولی ذکرشده، حجم تاجپوشش و میزان نور رسیده به خاک تغییر میکند و موجب تغییراتی در خصوصیات خاک و بهخصوص خواص زیستی خاک میشود. خواص زیستی و فعالیتهای آنزیمهای خاک، مناسبترین شاخص برای تعیین کیفیت خاک است. هدف از این تحقیق، ارزیابی شرایط خاک در مراحل مختلف تحولی است. به این منظور فعالیت آنزیم فسفاتاز و خصوصیات فیزیکی خاک در مراحل مختلف تحولی جنگل راش رضوانشهر تعیین شد. نمونهبرداری از خاک بهطور تصادفی و از دو عمق 10-0 و 20-10 سانتیمتر انجام گرفت و فعالیت آنزیمهای فسفاتاز با استفاده از واکنش با سوبسترا و توسط اسپکتروفتومتر سنجیده شد. همچنین برخی از خصوصیات فیزیکی خاک اندازهگیری شد. برپایۀ نتایج بهدستآمده، آنزیمهای اسید و آلکالین فسفاتاز و درصد سیلت در سطح احتمال 99 درصد، وزن مخصوص ظاهری عمق اول در سطح احتمال 95 درصد، در مراحل مختلف تحولی اختلاف معنیداری دارند و جز مقدار وزن مخصوص ظاهری در عمق اول، فعالیت تمام عوامل ذکرشده در مرحلة پوسیدگی بیشترین مقدار را داشته است. همچنین در مرحلة پوسیدگی اسید فسفاتاز در عمق 10-0 سانتیمتر با فسفر قابل جذب و آلکالین فسفاتاز در عمق 20-10 سانتیمتر با وزن مخصوص ظاهری در سطح احتمال 95 درصد همبستگی مثبت و معنیداری نشان دادند. براساس نتایج این تحقیق میتوان عنوان کرد که مرحلة پوسیدگی نسبت به دو مرحلة دیگر تحولی، شرایط بهتری را از نظر تجمع میکروبی و فعالیت میکروارگانیسمهای ترشحکنندۀ فسفاتازها داشته است.
[D1]معادل های انگلیسی حذف شد
The development of forest ecosystems compromises three stages including initial, optimal and decay.In all these stages, the changes in canopy volume and amount of light reaching lead to changes in soil physiochemical and biological properties. Enzymes activities as biochemical properties are of the most important indicators to determine the soil quality. This research aims at assessing the soil condition is in different development stages. For this purpose, phosphatase enzymes activities and some physical properties of soil in different development stages of Fagus orientalis Lipsky forests in Rezvanshahr area were determined. Soil samples were randomly taken from 0-10 and 10-20 cm depths. Activity of phosphatase enzymes was measured by spectrophotometry method. Some physical properties of soil such as bulk density, porosity were determined by standards methods. The results indicated acid and alkaline phosphatase enzymes activities were significantly different in terms of silt percent (p≤0.01), bulk density amount, and first depth (p≤0.05) in three development stages. The values of all measured properties were higher in decay stage except for bulk density amount in 0-10 cm depth than two other stages. In addition, the activity of acid phosphatase (depth 0-10) and alkaline phosphatase (depth 10-20) was positively correlated with available phosphorus in decay stage. It is concluded that the decay stage provides better conditions to the soil micro-organisms and phosphatase activity.
https://jfwp.ut.ac.ir/article_59885_4f67553914140fe38df8cab837ea52c5.pdf
آلکالین فسفاتاز
اسید فسفاتاز
راش
زیست خاک
acid phosphatase
alkaline phosphatase
Fagus orientalis
soil biology
per
دانشگاه تهران
نشریه جنگل و فرآورده های چوب
5052-2008
2383-0530
2016-11-21
69
3
461
471
10.22059/jfwp.2016.59887
59887
Research Paper
ثبت سیستمها و شناسایی عملیات بیشهزراعی (مطالعۀ موردی: شهرستان فریدن و چادگان اصفهان)
Systems recording and indentification of agroforestry practices (case study: Friedan and Chadegan citis, Isfahan province)
سید محسن حسنی
mohsenhassani@ut.ac.ir
1
قوام الدین زاهدی امیری
ghavamza@ut.ac.ir
2
سید مهدی حشمت الواعظین
mheshmat@ut.ac.ir
3
محمد عواطفی همت
4
سید حمید متین خواه
hmatikkhah@yahoo.com
5
دانشجوی کارشناسی ارشد دانشگاه تهران
استاد دانشگاه تهران
دانشیار دانشگاه تهران
استادیار دانشگاه تهران
استادیار دانشگاه صنعتی اصفهان
نظر به محدود بودن مطالعات بیشهزراعی در ایران، برای ایجاد بستری برای مطالعات بیشهزراعی، شناسایی سیستمهای موجود لازم است. یکی از مناطقی که انواع سیستم و فناوری بیشهزراعی در آن توسعه پیدا کرده، شهرستانهای فریدن و چادگان در استان اصفهان است؛ این منطقه بهسبب سهولت دسترسی و تنوع سیستمها برای مطالعه انتخاب شد. هدف از این مطالعه، ایجاد روشی برای جمعآوری، شناسایی و ثبت اطلاعاتی است که در لابهلای فناوریهای مختلف بیشهزراعی قرار دارد و منظور ارائۀ دانش سنتی بیشهزراعی و ایجاد زمینههای پژوهش و پیشبرد این دانش است. برای توصیف و ثبت فناوریهای بیشهزراعی در منطقه از روشی استفاده شد که حاصل تلفیق مشاهدات میدانی، مصاحبه و ثبت اطلاعات پایه بهعلاوۀ روش اولیۀ کارلویتز (1989) و روش متینخواه و همکاران (1382) است. اطلاعات بهدستآمده در چارچوب فرمی برای هر سیستم ثبت شد. معیارهای مورد استفادۀ متینخواه و همکاران (1382) برای نامگذاری فناوریها، پایۀ اصلی این فرم بوده است. در پایان با توجه به بازدیدهای متعدد از منطقۀ تحقیق و مصاحبههای انجامگرفته، تعدیلهایی در آنها صورت گرفت. همچنین چندین معیار متناسب با شرایط منطقه بر معیارهای روش قبلی اضافه شد. در این بررسی 17 سیستم مختلف بیشهزراعی شناسایی و ثبت شد. هر یک از این 17 سیستم با توجه به بهکارگیری 22 معیار آوردهشده در متن مقاله و زیرشاخههای آن توصیف شده است. همچنین فهرست اسامی سیستمها، منطقۀ مورد بررسی آنها با ذکر مؤلفههای اصلی درختی، زراعی و علوفهای با نامگذاریای که در طبقهبندی نیر (1993) دارند، آورده شده است. سپس این سیستمها براساس شرایط اقلیمی و اکولوژیکی و وضعیتهای اقتصادی اجتماعی طبقهبندی شده است.
Due to lack of agroforestry research in Iran, it is important to identify the existing agroforestry systems in order to create a database for further researches. Feridan and Chadegan citis, west of Isfahan province are two areas in which the various agroforestry systems have been developed. These two regions were selected for research because of providing the easy access and a variety of systems. The goal of this study was to design a method to collect, detect and record the data in the interdisciplinary field of agroforestry. Therefore, it was meant to introduce the traditional sicence of agroforestry and to create the necessary research backgrounds plus the development of this knowledge. Field observations, interview, recording the basic information, primary Carlowitz method (1972) and Mathinkhah et al(2003) method were adopted for describing and recording the agroforesty systems. The informations were recorded in special forms for each system based on Matinkhah et al (2003) criteria and eight cases of Carlowitz method for nomenclaturing systems. Furthermore, several adjustments were performed in accordance with region conditions and added to the existing criteria. Finally, 17 different agroforestry systems were identified and documented in the study. The descriptions of these systems are provided in the paper according to the 22 criteria. Also there is a list of the system names, region with principal criteria of trees, crops and forage in which exist in Nair (1993) classification. These systems were classified according to the ecological and climatic conditions, the level of technology and social and financial conditions.
https://jfwp.ut.ac.ir/article_59887_97a7d2a92f22576be012c3cf32e89424.pdf
اگروفارستری
ثبت سیستم ها
فریدن
چادگان
Agroforestry
Systems recording
Chadegan
Feridan
per
دانشگاه تهران
نشریه جنگل و فرآورده های چوب
5052-2008
2383-0530
2016-11-21
69
3
473
484
10.22059/jfwp.2016.59888
59888
Research Paper
برآورد میزان تولید و هزینههای بهرهبرداری در شرکت شفارود گیلان
Estimation of production and logging costs in Shafaroud logging company
فرشاد کیوان بهجو
farshad.keivan@gmail.com
1
باریس مجنونیان
bmajnoni@ut.ac.ir
2
منوچهر نمیرانیان
namirani@gmail.com
3
جهانگیر فقهی
jfeghhi@ut.ac.ir
4
ارسطو سعید
saeedarastou@yahoo.com
5
استادیار دانشگاه محقق اردبیلی
استاد دانشگاه تهران
استاد دانشگاه تهران
دانشیار دانشگاه تهران
استادیار بازنشسته دانشگاه تهران
از مقدمات رسیدن به مدیریت پایدار جنگل در جنگلهای شمال ایران، تجزیهوتحلیلهای هزینه-درآمدی بهمنظور کمک به حفظ کیفیت تودههای جنگلی در عملیات بهرهبرداری است. این بررسی با هدف محاسبۀ هزینهها و درآمدهای بهدستآمده از بهرهبرداری فعلی (ارزش خالص فعلی) انجام گرفت. این مطالعه در سه پارسل مجاور هم در سری دو حوضۀ آبخیز چفرود شاندرمن انجام گرفت که تحت مدیریت شرکت دولتی شفارود گیلان است. مطالعۀ کار و زمانسنجی طی عملیات قطع، چوبکشی، بارگیری و حمل صورت پذیرفت. متوسط وزنی قیمت 1 متر مکعب چوب 2565090 ریال بهدست آمد. مطالعۀ هزینههای تولید 1 متر مکعب چوب نشان داد که 128314 ریال مربوط به زیربخش هزینۀ بهرهبرداری، 158175 ریال مربوط به زیربخش هزینۀ ساخت جاده، 8161 ریال مربوط به زیربخش هزینۀ ساخت مسیر چوبکشی و 71223 ریال مربوط به زیربخش هزینۀ بالاسری است؛ بهعبارتی کل هزینههای تولید 1 متر مکعب چوب 365873 ریال است که 90 درصد آن را هزینههای ثابت تشکیل میدهد. با توجه به نتایج این تحقیق، پیشنهاد میشود که دولت اقدام به افزایش قیمت مادۀ اولیه (بهرۀ مالکانه) کند و همچنین شرکتهای بهرهبردار دولتی را بهدلیل آسیبهایی زیادی که به جنگل وارد میکنند، به پرداخت جریمه وادارد.
Sustainable forest management in Caspian forests of Iran requires cost-benefit analysis in order to maintain the quality of timber stands during logging operations. This study was done with the aim of cost and gross revenue computations from current logging (net present value) in three adjacent compartments in district 2 of Shafroud watershed. Motion and time studies were carried out during felling, bucking, skidding, loading, and hauling operations. The weighted average price for one cubic meter wood was computed 2565090 Rials in three compartments. The study of costs per cubic meter showed that 128314 Rials were devoted to logging costs, 158175 Rials to road construction costs, 8161 Rials to skid trail construction costs, and 71223 Rials to overhead costs. On the other hand, the total production cost per m3 is 365873 Rials of which 90% pertains to fixed costs. The results of this study suggest that government should increase the stumpage price, and governmental logging companies should pay costs due to severe damages to forests after logging operations.
https://jfwp.ut.ac.ir/article_59888_b3eda6c2a611ae832a26a36aa8ad4ec8.pdf
هزینه
درآمد
ارزش خالص فعلی
متوسط وزنی قیمت
Cost
Benefit
Net Present Value
Average weighted price
per
دانشگاه تهران
نشریه جنگل و فرآورده های چوب
5052-2008
2383-0530
2016-11-21
69
3
485
494
10.22059/jfwp.2016.59889
59889
Research Paper
غلبه بر خواب بذر و بهبود صفات جوانه زنی در بذور Acer monspessulanum sub turcomanicum
Overcoming seed dormancy and improving germination characteristics in Acer monspessulanum sub turcomanicum
وحیده پیام نور
mnoori56@gmail.com
1
غفار صلواتی
ghafar_salavati@yahoo.com
2
علیرضا علی عرب
aliarab@gau.ac.ir
3
وحیده محمدی چیانه
mohammadi.v@live.com
4
دانشگاه علوم کشاورزی و منابع طبیعی گرگان
دانشگاه علوم کشاورزی و منابع طبیعی گرگان، گرگان
دانشگاه علوم کشاورزی و منابع طبیعی گرگان، گرگان،
دانشگاه علوم کشاورزی و منابع طبیعی گرگان، گرگان،
تحقیق حاضر، با هدف یافتن بهترین تیمار جهت شکستن خواب بذر و بهبود صفات جوانهزنی و رویشی سیاهکرکو زیرگونۀ ترکمن انجام شد. بدین منظور بذور لازم از منطقۀ سیاهمرزکوه در 18 کیلومتری جنوب شرق گرگان- گلستان جمعآوری و پس از دو، چهار و شش ماه چینۀ سرمایی تحت تأثیر تیمارهای جیبرلیک اسید (250 و 500 پیپیام)، قارچکش (دیفنوکنازول) و آفتکش (ایمیراکلراید) قرار گرفت و صفات جوانهزنی شامل درصد جوانهزنی، ظرفیت حیاتی، انرژی جوانهزنی، ارزش جوانهزنی، سرعت جوانهزنی و شاخص بنیۀ بذر و صفات رویشی گیاهچههای ظاهرشده شامل طول ریشهچه، طول ساقهچه و زیتوده گیاهچۀ آنها بررسی شد. نتایج نشان داد بذور این گونه جهت غلبه بر خواب به شش ماه چینۀ سرمایی نیاز دارد و اعمال تیمار جیبرلیک اسید با غلظت 250 پیپیام پس از طی این دوره میتواند افزایش چشمگیری در صفات مربوط به جوانهزنی ایجاد کند. استراتیفۀ چهارماهه حتی برای بذور تحت تیمار با جیبرلیک اسید که اعمال آن بهطور معمول سبب کوتاه شدن دورۀ چینۀ سرمایی میشود، بیتأثیر بود.
This research aims at finding the best treatment for seed dormancy breaking, improvement of germination and vegetative characteristics of Acer monspessulanum sub turcomanicum. Seeds were collected from Siah Marz Kouh, 18 kilometers from south east of Gorgan city, Golestan province and were treated under cold stratification for 2, 4 and 6 months as well as gibberllic acid (250 and 500 ppm), fungicide (Dyphno Conazol) and pesticide (Imida Cloride). Germination characteristics including germination percent, germination capacity, germination energy, germination value, germination speed, vigor index and vegetative characteristics including root length, shoot length and plant biomass were also measured. Results showed that the seeds need six-month stratification for seed dormancy breaking. Gibberellic acid at 250 ppm concentration increases the germination characteristics after this period. Four-month stratification had no effect even for seeds treated with gibberellic acid that is usually applied to shorten the stratification period.
https://jfwp.ut.ac.ir/article_59889_30899171370e823cccf7b89b31e325b1.pdf
خواب بذر
سیاه کرکو
صفات جوانه زنی
رویشی
Seed dormancy
Acer monspessulanum
germination
vegetation
per
دانشگاه تهران
نشریه جنگل و فرآورده های چوب
5052-2008
2383-0530
2016-11-21
69
3
495
509
10.22059/jfwp.2016.59890
59890
Research Paper
بهبود نتایج رستهبندی گروه گونههای اکولوژیک با استفاده از مفهوم گونههای معرف
Improving the ordination of ecological species group using diagnostic species concept
امید اسماعیل زاده
oesmailzadeh@modares.ac.ir
1
سیده سمیرا سلیمانی پور
soleymaniporsamira@yahoo.com
2
دانشکده منابع طبیعی دانشگاه تربیت مدرس
دانشجوی کارشناسی ارشد جنگلداری، دانشکده منابع طبیعی، دانشگاه تربیت مدرس
هدف این پژوهش، طبقهبندی اکولوژیکی و تعیین گونههای معرف رویشگاههای شمشاد منطقۀ فریم ساری بود. بدین منظور 60 قطعه نمونه بهصورت سیستماتیک- انتخابی با ابعاد شناور 200 و 400 متری به مساحت 400 متر مربع با توجه به اصل تودۀ معرف در منطقه پیاده شد. پوشش گیاهی منطقه با استفاده از روش TWINSPAN اصلاحشده طبقهبندی و شش گروه اکولوژیک معرفی شد. نتایج تحلیل گونۀ معرف با استفاده از معیار تعلقه فی نشان داد از 77 گونۀ گیاهی منطقه، فقط 47 گونه دارای تعلقه مثبت به گروههای مزبورند (05/0P 14<"> ) که بهعنوان گونههای معرف جوامع گیاهی شمشاد منطقه معرفی شدند. بهمنظور بررسی الگوی توزیع گروههای اکولوژیک از تحلیل DCA برمبنای مقادیر درصد تاجپوشش گونهها (کلیۀ گونهها و فقط گونههای معرف) استفاده شد. نمایش ابرنقاط قطعات نمونۀ گروههای اکولوژیک منطقه در نمودار تحلیل DCA و مقایسۀ درصد تجمعی واریانس توجیهشده بیانگر آن است که رستهبندی گروههای مزبور براساس مقادیر درصد تاجپوشش فقط گونههای معرف (1/37 درصد) نسبت به کلیۀ گونهها (2/26 درصد) الگوی توزیع مناسبتری را ارائه میدهد. نتایج تحلیل MRPP نیز مبین آن است که ابرنقاط (پراکنش قطعات نمونه) گروهها در نمودار رستهبندی برمبنای فقط گونههای معرف از فاصلۀ درونگروهی کمتر، ولی با فاصلۀ بینگروهی بیشتری نسبت به حالتی که رستهبندی بر مبنای کلیة دادهها انجام میگیرد برخوردار است. بهطور کلی نتایج تحقیق حاضر تصریح میکند کاربرد گونههای معرف ممکن است به بهبود نتایج رستهبندی گروههای گیاهی بهمنظور تعیین دقیقتر عوامل محیطی مؤثر بر گروههای مزبور منجر شود.
This research aims at ecological classification and identifying diagnostic species of box tree (Buxus hyrcana Pojark) sites in Farim forests, Sari, Iran. The data were collected from 60- 400m2 sample releves in systematic- selective design (200 × 400 meter) by considering the indicator stand concept. Floristic data were analyzed using modified TWINSPAN and consequently, six ecological groups were classified. The results of diagnostic species analysis based on Phi fidelity index revealed that of the 77 species recorded, only 47 species had positive fidelity to presented groups (P<0.05) and therefore they were determined as diagnostic species of box tree plant communities in the study area. Detrended Correspondence Analysis (DCA) was used to represent the distribution pattern of ecological groups based on two data matrix of plant species canopy cover, full data and only diagnostic species. Comparisons of scatter plots of ecological groups along two first axes in DCA, as well as, result of cumulative traced variances in two series data (37.1% in only diagnostic species data and 26.2% in total species data) in this analysis clearly indicated that ordination of six groups based on only diagnostic species data presents more appropriate distribution pattern compared to full species data. It is concluded that application of diagnostic species may lead to improve the results of ecological group ordination in determining the effective environmental variables precisely on considered groups.
https://jfwp.ut.ac.ir/article_59890_2145e2b62c48b486c72330dd49eb4640.pdf
شمشاد
فریم
گروههای اکولوژیک
گونههای معرف
DCA
MRPP
TWINSPAN اصلاح شده
Box trees (Buxus hyrcana)
DCA
diagnostic species
ecological groups
Farim
modified TWINSPAN
MRPP
per
دانشگاه تهران
نشریه جنگل و فرآورده های چوب
5052-2008
2383-0530
2016-11-21
69
3
511
521
10.22059/jfwp.2016.59891
59891
Research Paper
تأثیر تنش خشکی بر خصوصیات فتوسنتزی دانهالهای گردو (Juglans regia L.)
The effect of drought stress on photosynthetic characteristics in Walnut (Juglans regia l.) seedlings
نسرین سیدی
n.seyedi@gmail.com
1
احمد علیجانپور
a.alijanpour@urmia.ac.ir
2
عباس بانج شفیعی
banedg@yahoo.com
3
هادی بیگی حیدرلو
hadibeygi@yahoo.com
4
استادیار دانشگاه ارومیه
دانشیار دانشگاه ارومیه
دانشیار دانشگاه ارومیه
دانشجوی کارشناسی ارشد دانشگاه ارومیه
محدودیت در تبادلات گازی یکی از عوامل کاهش رشد گیاهان در شرایط کمآبی و تنش خشکی است. در این پژوهش اثر تنش خشکی بر برخی خصوصیات تبادلات گازی 36 دانهال دوسالۀ گردوی ایرانی (Juglans regia L.) در قالب طرح کاملاً تصادفی با 9 تکرار و چهار تیمار بررسی شد. در شرایط تنش خشکی، تیمارهای آبیاری 100 (شاهد)، 75، 50 و 25 درصد پتانسیل آب با توجه به نیاز آبی گردو در ظرفیت زراعی اعمال شدند. اندازهگیری مشخصههای فتوسنتز، تعرق، هدایتروزنهای و غلظت Co2 زیر روزنهای، با استفاده از دستگاه تبادلات گازی IRGA در مراحل قبل و بعد از تنش انجام شد. بر اساس نتایج تجزیه واریانس مقدار فتوسنتز، هدایت روزنهای و هدایت مزوفیلی بعد از اعمال تنش بین تیمارهای مختلف آبیاری اختلاف معنیداری وجود داشت. مقایسه میانگینها با آزمون چند دامنهای دانکن نشان داد که مقدار فتوسنتز و هدایت روزنهای در تیمارهای 25 و 50 درصد آبیاری اختلاف معنیداری با شاهد داشتند. همچنین مقدار هدایت مزوفیلی نیز در تیمار 50 درصد آبیاری با شاهد اختلاف معنیدار نشان داد درحالیکه در تیمار 75 درصد آبیاری هیچیک از مشخصههای مورد بررسی با شاهد اختلاف معنیداری نداشتند؛ بنابراین بهمنظور صرفهجویی در مصرف آب میتوان مقدار آبیاری در این گیاه را به 75 درصد ظرفیت زراعی کاهش داد.
Restriction in gas exchanges is one of the reasons in reduction of the plant growth in water scarcity and drought stress conditions. In this study, the effect of drought stress on gas exchange characteristics of 36-two year old Persian walnut (Juglans regia L.) seedlings were studied in complete randomized design with nine replicates and four treatments. In terms of drought, irrigation treatments 100 (control), 75, 50, and 25 percent of the potential water were applied according to water requirement of walnut in field capacity. Photosynthesis, transpiration, stomatal conductance, and CO2 concentration were measured before and after the stress using IRGA gas exchange instrument. Based on the analysis of variance, photosynthesis, stomatal conductance and mesophilic conductance had significant difference among irrigation treatments. The statistical comparison with Duncan's multiple range test showed that the rate of photosynthesis and stomatal conductance at 25 and 50 percent of irrigation treatments had significant differences with the control. Significant difference was also observed for mesophilic conductance between 50 percent and control treatment. Meanwhile, there was no significant difference for all measured parameters between 75 percent and control treatment. Therefore, saving water for irrigation of the plants can be reduced to 75 percent of field capacity.
https://jfwp.ut.ac.ir/article_59891_947c2cbf50186c1a2be1f422e50431ca.pdf
آبیاری
تبادلات گازی
خصوصیات گازی
ظرفیت زراعی
گردو
Field capacity
gas characteristics
gas exchanges
Irrigation
Walnut
per
دانشگاه تهران
نشریه جنگل و فرآورده های چوب
5052-2008
2383-0530
2016-11-21
69
3
523
534
10.22059/jfwp.2016.59892
59892
Research Paper
بررسی میزان ترسیب کربن خاک در تیپهای مختلف جنگلکاریشده و طبیعی (مطالعۀ موردی: طرح جنگلداری چمستان، مازندران)
Investigation on the soil carbon sequestration in natural forest and different plantation types (case study: Chamestan forest, Mazandaran)
ضیاءالدین باده یان
badehian.z@lu.ac.ir
1
معصومه منصوری
masoomehmansoori91@gmail.com
2
محبوبه فسحت
mhfoshat60@gmail.com
3
محمد علی فخاری
fakhari_r1378@yahoo.com
4
سید محسن حسینی
hosseini@europe.com
5
استادیار دانشگاه لرستان
دانشجوی دکترا دانشگاه لرستان
دانشجوی کارشناسی ارشد دانشگاه تربیت مدرس
کارشناس ارشد سازمان جنگلها، مراتع و آبخیزداری کشور.
دانشیار دانشکده منابع طبیعی و علوم دریایی دانشگاه تربیت مدرس، پردیس نور
اکوسیستمهای جنگلی و مدیریت بهینۀ آن، تأثیر بسیار مهمی در جذب کربن اتمسفر دارد. این تحقیق با هدف بررسی تأثیر جنگلکاریهای طرح جنگلداری چمستان بر مقدار ترسیب کربن خاک صورت گرفت. نمونهبرداری خاک بهصورت منظم تصادفی و از عمقهای 15-0، 30-15 و 45-30 سانتیمتری انجام گرفت. در مجموع 20 نمونه خاک از شش تودۀ 21 سالۀ جنگلکاریشدۀ کریپتومریا (Cryptomeria japonica)، زربین (Cupressus sempervirens)، تدا (Pinus taeda)، افرا شبهچناری (Acer pseudo-platanus)، جنگلکاری آمیخته و جنگل طبیعی برداشت و به آزمایشگاه منتقل شد. نتایج نشان داد که بین مقدار کربن موجود در تودههای مختلف خالص، آمیخته و طبیعی در لایههای مختلف از نظر آماری تفاوت معنیداری وجود دارد و در مجموع لایهها (45-0 سانتیمتری)، این مقدار ترسیب کربن (108هکتار/تن) برای تودۀ طبیعی بهطور معنیداری (01/0P<) بیشتر از سایر تودههاست. همچنین نتیجۀ رگرسیون گامبهگام نشان داد که درصد نیتروژن و نسبت کربن به نیتروژن (C/N) بهترتیب از مهمترین اجزای تأثیرگذار بر مقدار کربن آلی خاک در تودههای بررسیشده است. به طورکلی، میتوان چنین نتیجه گیری نمود که با شناخت گونههایی که توانایی بیشتری برای ترسیبکربن دارند و همچنین بررسی عوامل مدیریتی تأثیرگذار بر فرایند ترسیبکربن، میتوان اصلاح و احیای اراضی را از جنبۀ ترسیب کربن دنبال کرد.
Forest ecosystems and their optimal management can play effective roles in mitigating the carbon emission as well as absorbing the atmospheric carbon. The present research was carried out to determine the effects of 21 year old stands of Cryptomeria japonica, Cupressus sempervirens, Pinus taeda, Acer pseudo-platanu and mixed plantation and natural forest stands on sequestration of carbon in the soil of Chamestan plantation area. The results showed that the difference of carbon in pure, mixed and natural stands, in different layers are statistically significant. Moreover, there are not any significant correlations between the acidity of the soil, nitrogen, salinity and phosphorus and carbon sequestration. For the total layers of the soil (0-45 cm), the rate of carbon sequestration in natural stands (108 ton/ha) was significantly higher than other stands) P<0/01 (. The results of stepwise regression showed that nitrogen percentage and C/N ratio were the most important factors affecting the soil organic carbon content. Overall, it can be concluded that programs of land restoration can be followed in terms of carbon sequestration through the identification of plant species with high potential for carbon sequestration and also evaluation of effective management factors.
https://jfwp.ut.ac.ir/article_59892_f1bdedc9a40186a620c0697a215e2e3e.pdf
جنگلکاری
خاک
ترسیبکربن
چمستان
Plantations
Soil
Carbon sequestration
Chamestan
per
دانشگاه تهران
نشریه جنگل و فرآورده های چوب
5052-2008
2383-0530
2016-11-21
69
3
535
549
10.22059/jfwp.2016.59893
59893
Research Paper
پیش استخراج کاه جو با آب داغ و تاثیر آن بر روی ویژگیهای خمیرکاغذهای سودا و مونواتانول آمین
Hot water pre-extraction of Barley straw and its effect on soda and monoethanolamine pulps properties
نسیبه محمدی ینقاق
nasibeh_mohammadi@yahoo.com
1
سحاب حجازی
shedjazi@gau.ac.ir
2
علی عبدالخانی
abdolkhani@ut.ac.ir
3
یحیی همزه
hamzeh@ut.ac.ir
4
دانش آموخته کارشناسی ارشد دانشگاه تهران
دانشیار دانشگاه تهران
دانشیار دانشگاه تهران
استاددانشگاه تهران
در این تحقیق پیش استخراج کاه جو با آب داغ و سپس خمیرکاغذ سازی سودا و مونواتانول آمین مورد مطالعه قرار گرفت. پیش استخراج با میزان همی سلولزهای استخراج شده 28 درصد و بازده پیش استخراج 7/72 درصد به عنوان شرایط بهینه انتخاب گردید. نتایج خمیرکاغذسازی نشان می دهند که در میان خمیرکاغذهای حاصل از کاه جو شاهد و پیش استخراج شده، خمیرکاغذ مونواتانول آمین بیشترین بازده را داراست. افت بازده چشمگیری در خمیرکاغذهای حاصل از کاه جو پیش استخراج شده با آب مشاهده می گردد. عدد کاپای خمیر کاغذ حاصله از کاه جو پیش استخراج شده در مقایسه با کاه جو شاهد تحت شرایط مشابه پخت با فرآیند خمیرکاغذسازی سودا بیشترکاهش می یابد اما این تاثیر با فرآیند خمیرکاغذسازی مونواتانول آمین مشاهده نمی شود. پیش استخراج کاه جو و سپس خمیرکاغذسازی سودا منجر به خمیرکاغذهائی با شاخص های کشش، ترکیدن و پارگی بیشتری در مقایسه با نمونه شاهد می شود. در مورد خمیرکاغذ مونواتانول آمین به استثنای شاخص کشش روند مشابه ای می تواند مشاهده شود. درجه روشنی خمیرکاغذهای حاصل از کاه جو پیش استخراج شده کاهش می یابد در حالی که پیش استخراج تأثیر چندانی بر میزان ماتی خمیرکاغذها ندارد.
In this study, hot water pre-extraction of barley straw followed with soda and monoethanolamine pulping was investigated. Pre-extraction that resulted in removal of 28 % of barley straw hemicelluloses and pre-extraction yield of 72.7 % was selected as the optimum pre-extraction treatment. The pulping results show that among the pulps from pre-extracted barley straw and barley straw without pre-extraction, monoethanolamine pulps have the highest yields. Also, the yields of pulps were drastically dropped after hot water pre-extraction. At the same pulping conditions, the kappa numbers of pulps that produced from pre-extracted barley straw were decreased more than that of from barley straw without pre-extraction in soda pulping, but this effect is not seen in the case of monoethanoleamine pulps. Pre-extraction of barley straw followed with soda pulping resulted in pulps with higher tensile, burst and tear indices in comparison to untreated samples. In the case of monoethanoleamine pulp the similar trend can be seen in except of tensile index. The brightness of pulps from pre-extracted barley straw is decreased while the pre-extraction has no effect on pulp opacities.
https://jfwp.ut.ac.ir/article_59893_bb73c862e530ba76767ca7944dbfc2db.pdf
پیش استخراج آب داغ
کاه جو
خمیرکاغذ سودا
خمیرکاغذ مونواتانول آمین
ویژگی های مکانیکی
ویژگی های نوری
hot water pre-extraction
Barley straw
soda pulp
monoethanolamine pulp
Mechanical properties
Optical properties
per
دانشگاه تهران
نشریه جنگل و فرآورده های چوب
5052-2008
2383-0530
2016-11-21
69
3
551
560
10.22059/jfwp.2016.59894
59894
Research Paper
بررسی شاخصهای مؤثر در پیشرفت صنایع مبلمان کشورهای در حال توسعه
Investigation on effective indices in development of wooden furniture industry for developing countries
محمد غفرانی
ghofrani@sru.edu
1
فرزانه رحیمی
lili_only_child@yahoo.com
2
حبیب نوری
habibnoori@yahoo.com
3
مجید عزیزی
mazizi@ut.ac.ir
4
دانشیار گروه صنایع چوب دانشکده مهندسی عمران دانشگاه تربیت دبیر شهید رجایی
فارغ التحصیل دانشگاهتربیت دبیر شهید رجایی
مسئول کارگاه آزمایشگاه/دانشگاه شهید رجایی
دانشیار گروه علوم و صنایع چوب و کاغذ، دانشکده منابع طبیعی، دانشگاه تهران
با توجه به سهم بسیار اندک کشور ایران از بازار جهانی مبل و ضرورت بهبود این وضعیت تحقیق حاضر با هدف تعیین شاخصهای مؤثر در پیشرفت صنعت مبلمان کشورهای درحال توسعه و ارائه راهکارهای مناسب جهت ارتقای آن در ایران، صورت گرفته است. برای این منظور، پس از انجام مطالعات پایهای و مکاتبات اینترنتی با کارشناسان و صاحب نظران خارجی و مصاحبه با متخصصان و کاردان های باتجربه داخل ایران، 29 معیار و زیر معیار تحت شش شاخص کلی: منابع انسانی، اجتماعی ـ فرهنگی، اقتصادی، سیاسی، فنی و محیطی شناسائی شده و با استفاده از روش فرآیند تحلیل سلسله مراتبی، درجه اهمیت هر یک از آنها مشخص گردیده است. نتایج حاصله نشان میدهد که معیارهای آموزش نیرویکار، حمایت دولت از تولید محصول، استراتژیهای بازاریابی، نوآوری در محصول و نیرویکار ارزان، بهترتیب، بالاترین امتیازها را داشته و نیز، راهکار توسعه منابع انسانی و شاخص منابع انسانی، بهترتیب مناسبترین راهکار و حساسترین شاخص بودهاند.
Due to the very small share of the global market of Iranian furniture and the need to improve the situation in Iran, this study was aimed to determine the factors contributing to the development of furniture industry in developing countries and provide strategies for improvement in Iran. 29 criteria and sub-criteria under 6 general criteria including, human resources, socio-cultural, economic, political, technical and environmental aspects were analyzed using analytical hierarchy process according to the basic studies and internet communications with foreign experts and scholars and interviews with local experience professionals and technicians, the degree of importance of each one of the has-been identified. The results show that the standards of education, labor, government support for the production, marketing strategies, product innovation and cheap labor, respectively. The highest rating, and also human resource development strategy and human resources index were found the most appropriate solution and the most sensitive indicators.
https://jfwp.ut.ac.ir/article_59894_8017e3ad11cf3fe3720b4ff1c0867085.pdf
تحلیل سلسله مراتبی
کشورهای در حال توسعه
مبلمان
منابع انسانی
AHP
Developing Countries
furniture
human resources
per
دانشگاه تهران
نشریه جنگل و فرآورده های چوب
5052-2008
2383-0530
2016-11-21
69
3
561
570
10.22059/jfwp.2016.59895
59895
Research Paper
تأثیر نانوذرات رس بر ویژگیهای فیزیکی-شیمیایی، ساختاری و حرارتی چسب اوره فرمالدهید
Influence of nanoclay on physiochemical, thermal and structural properties of urea formaldehyde resin
حامد یونسی کردخیلی
younesi1363@gmail.com
1
سعید کاظمی نجفی
skazemi@modares.ac.ir
2
ربیع بهروز
eshkiki@yahoo.com
3
استادیار دانشگاه سمنان
استاد دانشگاه تربیت مدرس
دانشیار دانشگاه تربیت مدرس
در این تحقیق، تأثیر نانوذرات رس بهعنوان پرکننده بر ویژگیهای فیزیکی- شیمیایی، ساختاری و حرارتی چسب اوره فرمالدهید بررسی شد. نانوذرات رس با نسبتهای 5/0، 1 و 5/1 درصد وزنی (نسبت به وزن خشک چسب) به چسب اوره فرمالدهید اضافه شدند. پس از افزودن نانوذرات، کلیۀ ویژگیهای فیزیکی- شیمیایی چسب از قبیل ویسکوزیته، زمان ژلهای شدن، درصد مادۀ جامد و دانسیته، براساس روشهای استاندارد اندازهگیری شد. همچنین تغییرات ساختاری و حرارتی چسب اوره فرمالدهید حاوی نانورس بهترتیب با آنالیز طیفسنجی تبدیل فوریه مادون قرمز (FTIR)، تفرق پراش پرتو ایکس (XRD) و آنالیز گرماسنجی تفاضلی (DSC) بررسی شد. نتایج این تحقیق نشان داد که با افزودن نانوذرات رس به چسب اوره فرمالدهید، دانسیته، ویسکوزیته و درصد مادۀ جامد چسب افزایش پیدا میکند، درحالی که مقدار فرمالدهید آزاد و زمان ژلهای شدن چسب کاهش مییابد. نتایج آنالیز FTIR نشان داد که در چسب حاوی نانوذرات رس، میزان اتصالات متیلنی کاهش مییابد و پیکهای جدیدی در باندهایcm-1 1140 و cm-1950 مشاهده میشود که مؤید انجام گرفتن واکنش شیمیایی بین نانوذرات رس و چسب اوره فرمالدهید است. براساس نتایج آنالیز DSC، افزودن نانوذرات رس، سبب تسریع انعقاد چسب اوره فرمالدهید میشود، بهطوری که دمای انعقاد اولیه و پیک انعقاد چسب اوره فرمالدهید از 85 و 110 درجۀ سانتیگراد بهترتیب به 75 و 90 درجۀ سانتیگراد کاهش مییابد. آنالیز XRD نشان داد که بعد از اضافه کردن نانوذرات رس به چسب، ساختار اتمی منظم نانورس از بین رفت و نانوذرات در درون پلیمر بهطور کامل لایهلایه شدند.
In this research, the effect of nanoclay on physiochemical, thermal and structural properties of urea formaldehyde resin (UF) was investigated. The prepared GLUF resin was mixed mechanically with the 0.5, 1 and 1.5% nanoclay for 5 min at room temperature. The physicochemical properties of the prepared resins were measured according to standard methods. Also, the thermal and structural changes in UF resin containing nanoclay were measured by Differential Scanning Calorimetry (DSC), Fourier Transform Infrared Spectrometry (FTIR) and X-ray Diffractometry (XRD). The physicochemical test results indicated that by addition of nanoclay the viscosity, solid content and density values were increased while the free formaldehyde and gelataion time of resin were decreased. FTIR analysis indicated that the addition of nanoclay decreased the methylene linkages in UF resin. Moreover, the new peak was appeared at 850 and 1140 cm-1 bands in nanoclay filled UF resin dealing that a chemical interaction between nanoclay and UF resin was accrued. According to DSC analysis nanoclay accelerates the curing temperature of resin while the onest and temperature peaks dramatically decreased. XRD analysis showed that nanoclay completely exfoliated in UF resin.
https://jfwp.ut.ac.ir/article_59895_d4e86d5ddcd13019908dcc0469c84dce.pdf
چسب اوره فرمالدهید
نانو رس
ویژگی های ساختاری
ویژگی های حرارتی
Urea formaldehyde resin
Nanoclay
structural properties
Thermal properties
per
دانشگاه تهران
نشریه جنگل و فرآورده های چوب
5052-2008
2383-0530
2016-11-21
69
3
571
583
10.22059/jfwp.2016.59896
59896
Research Paper
بررسی تولید انرژی حرارتی و کربن فعال از پسماند فورفورال
Investigation on thermal energy and activated carbon production from Furfural residue
فاطمه جدیدیان
jadidian.sahar@yahoo.com
1
محمد طلایی پور
mtalaeipoor@yahoo.com
2
سعید مهدوی
smahdavi@rifr-ac.ir
3
امیر هومن حمصی
h_hemmasi@srbiau.ac.ir
4
دانشجو کارشناسی ارشد
دانشیار دانشگاه آزاد اسلامی واحد علوم و تحقیقات
دانشیار موسسه تحقیقات جنگلها و مراتع کشور- بخش تحقیقات علوم چوب و کاغذ
دانشیار دانشگاه آزاد اسلامی واحد علوم و تحقیقات
هدف از این مطالعه، بررسی امکان استفاده از پسماند فورفورال برای تولید انرژی حرارتی و کربن فعال است. برای ارزیابی تولید انرژی، پارامترهای درصد رطوبت، خاکستر، مواد فرار، کربن ثابت، لیگنین، عناصر، دانسیتة حجمی، نقطۀ ذوب و ارزش حرارتی پسماند اندازهگیری شد. میانگین خاکستر پسماند فورفورال 4/15 درصد و مواد فرار آن 9/68 درصد اندازهگیری شد. میانگین دانسیتة حجمی پودر با مش 80-40 برابر 30/0 گرم بر سانتیمتر مکعب تعیین شد. میانگین لیگنین و نقطۀ ذوب این پسماند بهترتیب 8/55 درصد و حدود 950 درجۀ سلسیوس تعیین شد که اختلاف بهنسبت زیادی با چوب دارد. تفاوت بارزی بین میانگین درصد گوگرد این پسماند با زیستتودههای سلولزی وجود دارد که بهلحاظ آلایندگی محیط زیست اهمیت دارد. ارزش حرارتی ناخالص اندازهگیریشده با بمب کالریمتری برای MJ/kg 2/18 اندازهگیری شد که در محدودۀ چوب است. کربن فعال تهیهشده از پسماند فورفورال بهروش شیمیایی با کلرید روی فعال شد. میانگین سطح آزاد (BET) 501 متر مربع بر گرم و قطر منافذ 41/5 نانومتر بود که بر این اساس، برای جذب مایعات مناسبتر است. آزمون یدومتری نشان داد که میانگین عدد یدی کربن فعال تهیهشده 547 میلیگرم بر گرم است. بر اساس نتایج بهدست آمده در این تحقیق، تولید انرژی حرارتی از پسماند فورفورال به دلیل آلایندگی محیط زیست توصیه نمیشود اما برای تولید کربن فعال مورد استفاده در تصفیه آب صنایع مناسب است.
The purpose of this study is the utilization of furfural residue for heating energy and activated carbon production. To evaluate the energy production of the residue, bulk density, melting point, and heating value were measured. Furthermore, moisture, ash, volatile compounds, fixed carbon, lignin, and elements were determined. Ash and volatile content average were measured at 15.4% and 68.9%, respectively. The bulk density average of the residue powder with 40-60 mesh was determined at 0.30 g/cm3. There are significant difference between lignin content and melting point of furfural residue with wood which were measured at 8.55% and 950 °C, respectively. Also, it was found major difference between the average sulfur content of the waste and other biomass that is important in terms of environmental pollution. Gross heating value directly was measured by calorimetric bomb to 18.2 MJ/kg that is nearly to wood. The activated carbon produced from pyrolysis of furfural residue was chemically activated with zinc chloride. The chemically activated carbons were characterized by measuring iodine of 547 mg/g, specific surface (BET) of 501 m2/g, and pore diameter of 5.41 nanometer. It seems that the obtained activated carbon is suitable for liquid absorption according to the pore size. According to the results obtained in this study, thermal energy production from furfural residue is not recommended due to environmental pollution, but it is suitable for activated carbon production that could be used in the water purification industry.
https://jfwp.ut.ac.ir/article_59896_d918aa219e8cad28b7bf9b8ae07fca45.pdf
پسماند فورفورال
تولید انرژی
رطوبت
ارزش حرارتی ناخالص
کربن فعال
Furfural residue
Energy Production
moisture
gross heating value
Activated carbon
per
دانشگاه تهران
نشریه جنگل و فرآورده های چوب
5052-2008
2383-0530
2016-11-21
69
3
585
602
10.22059/jfwp.2016.59897
59897
Research Paper
ارتقای ویژگیهای کیفی مخلوط خمیرکاغذهای روزنامه و مجلۀ بازیافتی با تیمار آنزیمی همیسلولاز
Upgrading the qualitative characteristics of mixed recycled ONP and OMG pulps with hemicellulase
ایمان اکبرپور
iman.akbarpour@gmail.com
1
علی قاسمیان
ali_ghasemian@yahoo.com
2
حسین رسالتی
hnresalati@yahoo.com
3
احمدرضا سرائیان
saraeyan@yahoo.com
4
احمدجهان لتیباری
latibari.aj@gmail.com
5
دانشجوی دکتری- دانشگاه علوم کشاورزی و منابع طبیعی گرگان
دانشیار، دانشگاه علوم کشاورزی و منابع طبیعی گرگان، دانشکده مهندسی چوب و کاغذ، گروه صنایع خمیر و کاغذ، گرگان، ایران.
استاد، دانشگاه علوم کشاورزی و منابع طبیعی ساری، دانشکده مهندسی چوب و کاغذ، گروه صنایع چوب و کاغذ، ساری، ایران.
دانشیار، دانشگاه علوم کشاورزی و منابع طبیعی گرگان، دانشکده مهندسی چوب و کاغذ، گروه صنایع خمیر و کاغذ، گرگان، ایران.
استاد، دانشگاه آزاد اسلامی کرج، دانشکده چوب و کاغذ، کرج، ایران.
مرکبزدایی آنزیمی بهعنوان روش سازگار با محیط زیست برای تکمیل یا جایگزینی مرکبزدایی متداول شیمیایی پیشنهاد شده است. در این پژوهش تأثیر آنزیم همیسلولاز استخراجشده از قارچ Aspergillus niger بر ویژگیهای کیفی کاغذ حاصل از مخلوط 70 درصد خمیرکاغذ روزنامه و30 درصد مجلۀ باطله ارزیابی شد. آنزیم همیسلولاز در سطوح مختلف 1/0 (H1)، 2/0 (H2)، 5/0 (H3) و 1 درصد (H4) براساس وزن خشک خمیرکاغذ و زمانهای مختلف 40 (T1)،50 (T2) و60 دقیقه (T3) در شرایط ثابت درصد خشکی10 درصد، درجۀ حرارت °C60-55 در محدودۀ 7-5/6 pH بهکار گرفته شده و در ادامه خمیرکاغذها شستوشو و شناورسازی شدند. نتایج نشان داد که در غلظت آنزیم 2/0 درصد و مدت زمان60 دقیقه (تیمار H2T3) یا غلظت آنزیم 5/0درصد و مدت زمان50 دقیقه (تیمار H3T2)، میتوان کاغذهای بهمراتب روشنتر، سفیدتر و همزمان ماتی مناسب در مقایسه با خمیرکاغذ مرکبزدایینشده (تیمار C1) و خمیرکاغذ مرکبزداییشدۀ شیمیایی (تیمار C2) تولید کرد. همچنین در تیمارهای H2T3وH3T3 بیشترین میانگین شاخص مقاومت به کشش (271/32 و 017/30 نیوتن متر بر گرم)، طول پارگی (131/3 و 974/2 کیلومتر) و سفتی کاغذ (94/3و 12/4 میلینیوتن) و همچنین بیشترین شاخص مقاومت به ترکیدگی (73/2 و 475/2 کیلوپاسکال متر مربع بر گرم) بهترتیب در تیمارهایH2T3 وH4T2 و بیشترین شاخص مقاومت به پارگی (688/7 و 34/7 میلینیوتن متر مربع بر گرم) در تیمارهای H1T1 وH1T2 مشاهده شد که این مقادیر بهمراتب مطلوبتر از کاغذهای حاصل از تیمارهایC1 و C2 است. بهطور کلی نتایج بهدست آمده از این پژوهش بیانگر آن است که آنزیم همیسلولاز پتانسیل خوبی را در بهبود ویژگیهای کیفی مخلوط کاغذ روزنامه و مجله بازیافتی (در مقایسه با سیستم متداول صنعتی) دارا میباشد.
Enzymatic deinking has been suggested as an environmentally friendly alternative to complement and replace for conventional chemical deinking. In the present research, the effect of hemicellulase from Aspergillus niger has been evaluated on paper quality of mixed 70% old newspaper (ONP) and 30% old magazine (OMG) pulp. Hemicellulose was used at different charges of 0.1 (H1), 0.2 (H2), 0.5 (H3) and 1 (H4) percentages based on oven dry weight of pulp and different times of 40 (T1), 50 (T2), and (T3) under constant conditions of %10 consistency, temperature 55-60 °C at pH range of 6.5-7 and then the pulps were washed and floated. The results showed that compared to undeinked pulp (C1) and chemical deinked pulp (C2), papers with higher brightness, whiteness and appropriate opacity could be achieved at % 0.2 enzyme concentration and duration time of 60 min (H2T3) and also % 0.5 enzyme concentration and duration time of 50 min (H3T2). Also, the results of assessments indicate that the highest tensile index (32.271 and 30.017 Nm/g), breaking length (3.131 and 2.974 km) and stiffness (3.94 and 4.12 mN) were observed in treatments of H2T3 and H3T3, and the highest tear index (7.688 and 7.34 mN.m2/g) was observed in treatments of H1T1 andH1T2 respectively. These results are more desirable than paper produced with treatment samples of C1 and C2. In general, achieved results from this research indicate that hemicellulase has a good potential to improve the quality of mixed recycled ONP and OMG waste papers vs. standard conventional system.
https://jfwp.ut.ac.ir/article_59897_b2093ad9d798fe532edee057d51fd882.pdf
کاغذ روزنامه بازیافتی
کاغذ مجله بازیافتی
همیسلولاز
ویژگیهای نوری
ویژگیهای مکانیکی
Old newspaper
Old magazine
Hemicellulase
Optical properties
Strength properties
per
دانشگاه تهران
نشریه جنگل و فرآورده های چوب
5052-2008
2383-0530
2016-11-21
69
3
603
614
10.22059/jfwp.2016.59898
59898
Research Paper
بهبود طول پارگی کاغذ با نانو الیاف سلولزی در خمیر کاغذ باگاس
Improving paper breaking length using cellulosic nanofibers in bagasse pulp
محمد هادی مرادیان
moradian_h@yahoo.com
1
پژمان رضایتی چرانی
p.rezayati@gmail.com
2
محمد علی سعادت نیا
saadatnia@bkatu.ac.ir
3
استادیار دانشگاه صنعتی خاتم الانبیا بهبهان
استادیار دانشگاه صنعتی خاتم الانبیا بهبهان
استادیار دانشگاه صنعتی خاتم الانبیا بهبهان
کارخانه کاغذ پارس بهمنظور بهبود مقاومت کاغذهای حاصل از خمیر کاغذ باگاس، خمیرکاغذ الیاف بلند وارداتی سوزنیبرگ بهعنوان تقویت کننده استفاده کرده و این هزینههای زیادی را به کارخانه تحمیل میکند. این تحقیق با هدف بررسی جایگزین سیستمهای افزودنی نشاسته کاتیونی- بنتونیت، نانوالیاف سلولز- نشاسته کاتیونی، و نانوالیاف سلولزی- پلی اکریل آمید کاتیونی، با خمیر کاغذ الیاف بلند برای بهبود طول پارگی کاغذ حاصل از خمیرکاغذ باگاس انجام شد. نتایج نشان داد با افزودن 1 درصد نشاسته کاتیونی، طول پارگی کاغذ حاصل معادل کاغذ باگاس تقویت شده با 15 درصد خمیر کاغذ الیاف بلند وارداتی بهدست میآید اما به دلیل مشکلات فرآیندی احتمالی، تیمار ترکیبی با مقدار نشاسته کمتر (75/0 درصد) همراه با 3 درصد نانو الیاف سلولزی نیز بررسی شد که توانست طول پارگی معادل را ایجاد کند. همچنین با افزودن ۵/۷ درصد نانو الیاف سلولزی و ۰۳/۰ درصد پلیاکریلآمید کاتیونی به خمیر کاغذ باگاس بدون استفاده از نشاسته نیز طول پارگی معادل افزودن 15 درصد خمیر کاغذ الیاف بلند حاصل شد. افزودن بنتونیت به همراه نشاسته کاتیونی به خمیر کاغذ باگاس موجب بهبود جزئی آبگیری خمیر کاغذ شد.
Pars paper factory adds imported long fiber pulp which is made from softwoods to its bagasse pulp to reinforce the paper strength, thereby incurring high expenses to this factory. This research aimed to assess the replacement of different systems of additives (cationic starch-bentonite, cellulose nanofibers-cationic starch, cellulose nanofibers- cationic polyacrylamide) with long fiber pulps, while keeping the paper breaking length to the extent of adding 15% imported long fibers. The results showed adding 1 percent cationic starch leads to enough breaking length, but according to possible process problems adding lesser amount of starch (0.75 %) with 3 % cellulosic nanofibers was also investigated, which could attain suitable paper breaking length. In addition, a treatment without starch but with 7.5 % cellulosic nanofibers and 0.03 % cationic polyacrylamide could also reach to an equivalent breaking length of adding 15 % long fiber pulp. Furthermore, adding bentonite with cationic starch to bagasse pulp resulted in a little improvement in pulp drainage.
https://jfwp.ut.ac.ir/article_59898_6b59702ea928c6ccbe14084db4608ec9.pdf
باگاس
خمیرکاغذ
طول پارگی
نانو الیاف سلولزی
نشاسته کاتیونی
Bagasse
Pulp
breaking length
cellulosic nanofiber
Cationic starch
per
دانشگاه تهران
نشریه جنگل و فرآورده های چوب
5052-2008
2383-0530
2016-11-21
69
3
615
624
10.22059/jfwp.2016.59899
59899
Research Paper
تأثیر همیسلولز در کارایی فیبریله شدن آنزیمی و مکانیکی الیاف سودای باگاس
The effect of hemicellulose on the enzymatic and mechanical fibrillation efficiency of soda bagasse fiber
سید رحمان جعفری پطرودی
sr_jafari@sbu.ac.ir
1
عضو هیئت علمی گروه فناوری تولید سلولز و کاغذ- دانشکده مهندسی انرژی و فناوری های نوین دانشگاه شهید بهشتی
همیسلولزها بهلحاظ فراوانی دومین پلیساکارید موجود در مواد لیگنوسلولزی شامل الیاف گیاهان چوبی و غیرچوبی هستند. در این تحقیق، برای تولید نانوالیاف سلولزی، از دو نوع خمیر شامل خمیر رنگبریشده و خمیر حلشوندۀ سودای باگاس با مقادیر متفاوت همیسلولز با بهرهگیری از فرایند همگنساز با فشار برشی زیاد استفاده شد. همچنین پیشتیمار آنزیمی اندوگلوکاناز برای جلوگیری از کلوخه شدن الیاف و نیز کاهش مصرف انرژی در بخش همگنساز بهکار گرفته شد. بهمنظور اندازهگیری مقدار فیبریله شدن الیاف شامل ضخامت نانوالیاف سلولزی و ناهمواری سطح، از دستگاه پروفیلسنج لیزری و میکروسکوپ الکترونی روبشی استفاده شد. نتایج نشان داد که نانوالیاف سودای باگاس دارای ضخامت کمتر از 40 نانومتر بودهاند و رابطۀ مستقیمی بین مقدار همیسلولز و فیبریله شدن الیاف دیوارۀ سلولی خمیر باگاس وجود دارد. همچنین نانوکاغذ حاوی همیسلولز بیشتر، دارای ناهمواری سطح کمتر و نانوالیاف سلولزی نازکتری از خمیر حلشونده بوده است. ناهمواری سطح، ویژگی بسیار مهمی برای بررسی میزان فیبریله شدن است؛ در نتیجه تأثیر همیسلولز بهعنوان تسهیلکنندۀ فیبریله شدن الیاف در این تحقیق ثابت شد.
Hemicelluloses are the second most abundant polysaccharides in the lignocellulosic materials such as wood and non-wood plants. In this research, high pressure homogenizer (HPH) was used to produce cellulose nanofibesr from two different pulps from bagasse with different amount of hemicelluloses. Also, endoglucanase enzyme pre-treatment was applied to hinder the aggregation of produced fibers and to reduce energy consumption during homogenization process. The amount of fiber fibrillation was analyzed as cellulose nanofiber thickness and surface roughness using laser profilometry (LP) and field emission scanning electron microscopy (FESEM). The results showed that the thickness of the prepared cellulose nanofibers were less than 40nm and there is a direct relationship between hemicellulose content and bagasse cell wall fibrillation. Moreover, paper sheets that contains more hemicelluloses showed a lower LP roughness as well as thinner cellulose nanofiber than that of dissolved pulp. Since roughness can be considered as most important characteristic for fibrillation study, as a result in this study the facilitator effect of hemicellulose for fibrillation was corroborated.
https://jfwp.ut.ac.ir/article_59899_b37aad271cff0d49ad1e0c9581e6713c.pdf
باگاس
پروفیل سنج لیزری
خمیرحل شونده
میکروسکوپ الکترونی روبشی
همگن ساز
همی سلولز
Bagasse
Dissolving pulp
Filed Emission Scanning Electron Microscopy Hemicelluloses
Homogenizer
Laser Profilometery
per
دانشگاه تهران
نشریه جنگل و فرآورده های چوب
5052-2008
2383-0530
2016-11-21
69
3
625
635
10.22059/jfwp.2016.59900
59900
Research Paper
بررسی جایگزینی تولید روزنامه چوب وکاغذ مازندران با مخلوط گونهها برویژگیهای خمیرکاغذ CMP
Evaluation alternative in MWPI's newsprint production with mixture of species on the properties of CMP paper
مجتبی گلی
goli.me2020@gmail.com
1
سید مجید ذبیح زاده
m.zabihzadeh@sanru.ac.ir
2
قاسم اسدپور اتویی
asadpur2002@yahoo.com
3
علی برزن
mwpi_alibarzan@yahoo.com
4
کارشناس ارشد صنایع خمیر و کاغذ
-دانشیار گروه چوب و کاغذ دانشگاه علوم کشاورزی و منابع طبیعی ساری
-استادیار گروه چوب و کاغذ دانشگاه علوم کشاورزی و منابع طبیعی ساری
مدیر صنعت کارخانه چوب و کاغذ مازندران
با توجه به محدودیت منابع جنگلی به ویژه در مورد گونههای مصرفی کارخانه چوب و کاغذ مازندران (راش و ممرز)، در این تحقیق تاثیر اختلاط چوب گونههای پهن برگ جنگلی شامل بلوط، افرا، توسکا و کلهو و گونههای پهنبرگ غیرجنگلی شامل بید و صنوبر با جایگزینی گونه های مصرفی کارخانه فوق الذکر بر ویژگیهای کاغذ روزنامه ساخته شده بررسی شد. پس از تهیه خمیرکاغذ CMP مطابق با شرایط بازده 85 درصد، زمانهای متفاوت پخت (60-25 دقیقه)، درجه حرارت 170 درجه سانتیگراد و نسبت مایع پخت به خرده چوب، 7 به 1 و ساخت کاغذهای دست ساز استاندارد60 گرم بر متر مربع، ویژگیهای مکانیکی و نوری کاغذهای آنها مورد ارزیابی قرار گرفت. نتایج نشان داد که با افزایش میزان درصد گونه صنوبر، کیفیت کاغذ ساخته شده نیز افزایش یافته و بهترین ویژگیهای مقاومتی و نوری مربوط به تیمارهای با مقادیر بالای گونه ممرز و یا صنوبر بوده است. هر چند که با استفاده از درصدهای کم سایر گونهها نیز در ترکیب با درصد بیشتر صنوبر میتوان به نتایج قابل قبولی دست یافت.
The effects of mixing forest hardwood species (including Oak, Maple & Persimmon) and non-forest ones (including Willow & poplar) on optical and mechanical properties of newsprint produced from CMP were investigated. These species were used instead of MWPI's common used species (including Beech & Hornbeam) regarding to the forest resources diminishing. The pulp (CMP) was prepared under conditions of 85% yield and different cooking times (25-60 min.), temperature of 170°C , L/W= 1/7. The optical and mechanical properties of hand sheets with a basis weight of 60 g/m2 have been assessed. Results indicated that the quality of paper was increased by increasing the amount of Poplar and also it was found that the best strength and optical properties were related to the treatments with higher amounts of hornbeam or poplar. However, it should be noted that acceptable results can be achieved by using low amounts of other species mixed with higher percentages of Poplar.
https://jfwp.ut.ac.ir/article_59900_6d8479887e2f74e0ef5bef6dbea41b08.pdf
گونههای پهنبرگ جنگلی و غیرجنگلی
کاغذ روزنامه
خمیرکاغذ CMP
ویژگیهای نوری و مکانیکی
Forest & non-forest hardwood species
Newsprint
CMP
Optical & mechanical properties.
per
دانشگاه تهران
نشریه جنگل و فرآورده های چوب
5052-2008
2383-0530
2016-11-21
69
3
637
645
10.22059/jfwp.2016.59901
59901
Research Paper
پتانسیل پسماند واحد های جوهرزدایی کاغذ های باطله در تولید تخته های فیبر گچ
The potential of deinked waste paper sludge in gypsum fiberboard production
بنیامین حاج مهدی
benyaminhajymahdi@gmail.com
1
شادمان پورموسی
sh.pourmousa@gmail.com
2
احمد جهان لتیباری
latibari_24@yahoo.com
3
آژنگ تاج دینی
atajdini@gmail.com
4
کارشناس ارشد دانشکده منابع طبیعی دانشگاه آزاد کرج
استادیار دانشگاه آزاد کرج- صنایع چوب و کاغذ
استاد دانشکده منابع طبیعی دانشگاه آزاد کرج
دانشیار دانشکده منابع طبیعی دانشگاه آزاد کرج
پسماندهای جوهرزدایی کاغذهای باطله دارای الیاف سلولزی و مواد معدنی هستند و استفاده از آنها بر کاربردها و ویژگی های محصول نهایی تاثیر گذار است. برای این منظور تحقیق حاضر با استفاده ازپسماند واحدهای جوهرزدایی برای تولید تخته های فیبر گچ با نسبت گچ به پسماند، 100 : 0، 90 : 10، 80 : 20، 70 : 30 و 40:60 طی دو زمان پرس 10 و 20 دقیقه با مقدارفشار ثابت kg/cm230 به صورت سرد انجام شد و ضخامت تخته 12 میلی متر درنظر گرفته شد. نتایج نشان داد با توجه به این که پسماند مورد نظر دارای الیافی نرم، کوتاه و با مقدار زیاد مواد معدنی است با افزایش مقدار آن در تخته ها اتصال بین گچ و پسماند تحت تاثیر قرار می گیرد. اثر مقدار پسماند بر خواص فیزیکی و مکانیکی تخته های فیبر گچ در سطح 99 درصد احتمال معنیدار بود. به طوری که بیشترین جذب آب، واکشیدگی ضخامتی و کمترین دانسیته تختهها برای ترکیب 40:60 درصد گچ به پسماند به ترتیب 7/29 درصد، 15/2 درصد و g/cm366/0 به دست آمد از طرفی کمترین مقاومت خمشی و مدول الاستیسیته برای ترکیب 30:70 درصد گچ به پسماند به مقدار MPa 7655/1 و GPa598/1 به دست آمد. زمان پرس در سطح 95 درصد احتمال بر مقاومت های فیزیکی تخته ها معنی دار نبود. بر اساس نتایج تحقیق و حساسیت کمتر برخی از کاربردهای صنعتی تخته های فیبر گچ به مقاومت های فیزیکی می توان پیشنهاد داد که پسماندهای واحدهای جوهرزدایی کاغذهای باطله با رعایت برخی از الزامات ، در تولید تخته های فیبر گچ برای مصارف داخلی مانند سقف های کاذب استفاده شود.
Application of cellulosic fibers and minerals of deinked waste paper sludge has a great impression on utilization and characteristics of final product. This study was designed to produce use gypsum-fiber board from the DIP sludge. The gypsum: sludge ratio was considered as 100:0, 90:10, 80:20, 70:30 and 60:40. Two types of gypsum boards were prepared with fixed 12 mm thickness and cold pressing time of 10 and 20 minutes at 30 kg/cm2. The results revealed that, regarding the fact that the DIP sludge contains a variety of short fibers with excessive amount of minerals, increasing the sludge loading could affect the compatibility of gypsum and sludge. The effect of sludge on physical and mechanical properties of gypsum fiber boards was significant to probability of 99%, in a way that maximum water absorption, maximum thickness swelling and minimum density of the boards for the treatment of 40:60 percent of gypsum to sludge was gained as follows in respect: 29.7%, 2.15 % and 0.66 g/cm3. On the other hand, MOR and MOE for board with gypsum: sludge ratio of 70:30 were gained 1.765MPa and 1.598 GPa, respectively. The effect of pressing time on physical properties of gypsum fiberboard was not significant at the probability of 95%. According to the obtained results, it has been suggested that such boards could be used in covering and ceiling isolating applications.
https://jfwp.ut.ac.ir/article_59901_11da010360580698e086113144f078b7.pdf
پسماندجوهرزدایی
تخته فیبر گچ
کاربردهای عایقی
ویژگی های فیزیکی
ویژگی های مکانیکی
DIP sludge
Gypsum fiber board
Isolating application
Physical properties
Mechanical Properties
per
دانشگاه تهران
نشریه جنگل و فرآورده های چوب
5052-2008
2383-0530
2016-11-21
69
3
1
18
10.22059/jfwp.2016.60532
60532
Research Paper
چکیده های انگلیسی
English Abstracts
https://jfwp.ut.ac.ir/article_60532_9635d4fbd4c4e7100f0a3f1a8dde741c.pdf