@article { author = {Rahmaninia, Mehdi and Rohi, Mostafa and Ramezani, Omid and Zabihzadeh, Seyed Majid}, title = {The Effect of Pulp Suspension pH on the Performance of Chitosan –Nanobentoniteas a Dry Strength Additive in Hardwood CMP Pulp}, journal = {Forest and Wood Products}, volume = {68}, number = {2}, pages = {347-357}, year = {2015}, publisher = {University of Tehran}, issn = {5052-2008}, eissn = {2383-0530}, doi = {10.22059/jfwp.2015.54836}, abstract = {In this research, the effect of pH onthe performance of nanobentonite -chitosan system (as dry strength additives) in hardwood chemi-mechanicalpulp (CMP) was studied.For this purpose, 3 levels of pH(5.5, 7, 8.5) and 3 levels of chitosan (0.75, 1.25 and 2% - based on oven dried pulp) in constant level of 0.3 nanobentonite(based on oven dried pulp) were applied.The Atomic Force Microscopy(AFM) imageconfirmed the nano structure of bentonite in thickness dimension at the range of 1-22.3 nm.The results indicated that nano bentonite – chitosan in all levels of pH caused numerical improvement in tensile,burst and tear indicesand also apparent density in comparison with control sample.Although theeffect of studiedvariables (chitosan dosages and pH levels) on considered properties was statistically significant,but most of treatments were in the same groups according to Duncan grouping.In this research, treatment consisting of 1.25 chitosan in fixed level of 0.3 nano bentonite at alkaline pH showed the best results in mentioned properties and statistically had significant difference comparing other treatments.Therefore,it wasintroduced as theselected treatment in this research.It seems that the ratioof chitosanandbentonite nano anion had a great effect on performance ofnanoparticle system.Also the results showed that the performance of system depend on the pH of furnish and the best results was achievedin alkaline condition (pH=8.5).}, keywords = {:Bentonite,Chemi-mechanical pulp,Wet end chemistry,Papermaking,Chitosan,Mechanicalproperties}, title_fa = {تأثیر pH بر عملکرد افزودنی مقاومت خشک کایتوزان‌ـ نانوبنتونیت در خمیرکاغذ شیمیایی‌‌ـ مکانیکی پهن‌برگان}, abstract_fa = {در این تحقیق تأثیر pH بر عملکرد سیستم نانو‏ذرة حاوی کایتوزان‌ـ بنتونیت، به منزلة افزودنی مقاومت خشک، در خمیر‏کاغذ شیمیایی‌ـ مکانیکی پهن‏برگان بررسی شد. به ‏این ‏منظور سه سطح pH، شامل 5/5 و 7 و 5/8، همراه سه سطح 75/0 و 25/1 و 2 درصد (بر اساس وزن خشک خمیرکاغذ) کایتوزان در سطح ثابت 3/0 درصد (بر اساس وزن خشک خمیرکاغذ) نانوذرة بنتونیت به کار رفت. تصویر حاصل از میکروسکوپ نیروی اتمی (AFM) مؤید نانوبودن بنتونیت در بعد ضخامت در محدودة 3/22 -1 نانومتر بود. نتایج نشان داد سیستم کایتوزان‌ـ نانوبنتونیت در همة سطوح pH سبب بهبود عددی شاخص‏های مقاومت به کشش، ترکیدن، پاره‏شدن، و همچنین دانسیتة ظاهری نسبت به نمونة شاهد می‌شود. هرچند از نظر آماری تأثیر متقابل دو متغیر بررسی‌شده (مصرف کایتوزان و سطوح pH) بر ویژگی‏های مورد نظر معنا‏دار بود، در گروه‏بندی دانکن بیشتر تیمارهای بررسی‌شده در گروه‏بندی‏های مشابه آماری قرار گرفتند. در این پژوهش، تیمار دارای 25/1 درصد کایتوزان در سطح ثابت نانو‏بنتونیت 3/0 درصد در pH قلیایی بهترین نتایج را در ویژگی‏های ذکرشده نشان داد؛ به ‏طوری ‏که از نظر آماری نیز تفاوت معنا‏داری با سایر تیمارها داشت. بنابراین این تیمار تیمار‌ِ منتخب معرفی شد. به‏ نظر می‏رسد نسبت کایتوزان به نانوآنیون بنتونیت در عملکرد سیستم نانوذره تأثیری بسزا دارد. همچنین نتایج نشان داد عملکرد این سیستم به pH تعلیق (سوسپانسیون) خمیرکاغذ بستگی دارد و بهترین نتایج در تیمارهای قلیایی (5/8pH=) حاصل شد.}, keywords_fa = {بنتونیت,خمیرکاغذ شیمیایی‌ـ مکانیکی,شیمی پایانۀ تر,کاغذسازی,کایتوزان,ویژگی‏های مقاومتی}, url = {https://jfwp.ut.ac.ir/article_54836.html}, eprint = {https://jfwp.ut.ac.ir/article_54836_91f007e5416c8fc4a9bb8135ee254b7d.pdf} }