@article { author = {imani, monireh and ghasemian, ali and shakeri, alireza and akbarpour, iman}, title = {Investigation of Physical and Mechanical Properties of Old Magazine Recycled Fiber and Glass Fiber- Polypropylene Hybrid Composite}, journal = {Forest and Wood Products}, volume = {68}, number = {1}, pages = {209-220}, year = {2015}, publisher = {University of Tehran}, issn = {5052-2008}, eissn = {2383-0530}, doi = {10.22059/jfwp.2015.53990}, abstract = {In this research, Old Magazine (OMG) recycled fiber and glass fiber (GF) were mixed at different levels of 10%, 20%, 30% and 40% (based on weight) with two levels of 50% and 60% Polypropylene (PP) and then the produced composites evaluated compared to those from net Polypropylene. On the basis of obtained results from normalization equations in different treatments done, two treatments has been selected at a point of the better physical and mechanical properties and then chemically modified by maleic anhydride Polypropylene (MAPP) at two levels of 0 and 4%. Achieved results showed that treatments including the ratios 20:20:60 and also 20:30:50 (GF, OMG, PP, respectively) were resulted in the composites with improved physical and mechanical properties. Utilizing MAPP caused to improve the mechanical properties of composites and decrease of thickness swelling, water absorption in two optimum treatments before determined. Scanning electron microscopy results showed that in the composites contain of MAPP, Fibers were desirably compounded with Polypropylene.  }, keywords = {Old Magazine Recycled Fiber,Composite,maleic anhydride,Physical properties,Mechanical properties}, title_fa = {بررسی برخی از خواص فیزیکی و مکانیکی چند‌سازه‏های هیبرید الیاف کاغذ مجلۀ بازیافتی و الیاف شیشه‌ـ پلی‌پروپیلن}, abstract_fa = {در این پژوهش الیاف کاغذ مجلۀ بازیافتی (OMG) و الیاف شیشه (GF) در سطوح مختلف10،20، 30 و 40 درصد (از نظر وزنی) با پلی‌پروپیلن (PP) در دو سطح 50 و 60 درصد مخلوط و چندسازۀ ساخته‌شده با چندسازۀ حاصل از پلی‌پروپیلن خالص بررسی شدند. براساس نتایج به‏دست‌آمده از معادله‌های نرمال‌سازی در تیمارهای مختلف انجام‌شده، دو تیمار برتر از نظر ویژگی‌های فیزیکی و مکانیکی بهتر بر‌اساس معادلۀ نرمال‌سازی انتخاب و سپس با دو سطح صفر و 4 درصد پلی‌پروپیلن مالئیک انیدریددارشده (MAPP) اصلاح شیمیایی شدند. نتایج حاصل نشان داد که تیمارهای با نسبت60:20:20 و همچنین50:30:20 (به‌ترتیب GF، OMG و PP) چندسازه‌های با ویژگی‌های فیزیکی و مکانیکی بهتری را نتیجه دادند. استفاده ازMAPP در دو تیمار بهینۀ تعیین‌شده، موجب بهبود ویژگی‌های مکانیکی و کاهش واکشیدگی ضخامت و جذب آب چندسازه شد. نتایج عکس‌برداری الکترونی پویشی (SEM) نشان داد که چند‌سازه‌های حاوی MAPP به‌ شکل بهتری با فاز زمینه پلیمری بهتر ترکیب شده و عمل در‌برگیری الیاف به‌وسیلۀ پلی‌پروپیلن بهتر انجام شده است.}, keywords_fa = {الیاف مجلۀ بازیافتی,چندسازۀ هیبریدی,مالئیک انیدرید,ویژگی‌های فیزیکی,ویژگی‌های مکانیکی}, url = {https://jfwp.ut.ac.ir/article_53990.html}, eprint = {https://jfwp.ut.ac.ir/article_53990_13a626b89c9e1722eed28b2f9e566a5c.pdf} }