@article { author = {Mohammadnezhad Kiasari, Sh. and Sagheb-Talebi, Kh. and Rahmani, R. and Dastangoo, D.}, title = {Assessment of plant and soil invertebrates diversity at development stages of natural beech stand, Haftkhal Forest (Mazandaran)}, journal = {Forest and Wood Products}, volume = {71}, number = {3}, pages = {185-197}, year = {2018}, publisher = {University of Tehran}, issn = {5052-2008}, eissn = {2383-0530}, doi = {10.22059/jfwp.2018.252821.899}, abstract = {This research was carried out with the aim of studying the status of natural regeneration and biodiversity (plants and soil invertebrates) of beech forest in three development stages including initial, optimal and decay. After identifying the development stages, one 1 ha sample plot was established in each development stage. Within each sample plot, 10 100 m2 micro-sample plots were laid out as random-systematically. The values of natural regeneration, plant and soil invertebrates diversity in optimal, initial and decay stages have been recorded and eastimated in 30 micro-sample plots. The results of this research showed that natural regeneration in the optimal stage was significantly greater than other stages (7.5 seedlings per 100 m2), while the differences of natural regenerations between the stages of initial (2.9 seedlings per 100 m2) and decay (2.8 seedlings per 100 m2) were not statistically significant. The plant diversity (Shannon-Wiener index) in the optimal stage had the highest values (2.375), whereas the decay stage had the lowest value (1.929). But the differences in the initial stage with other stages were not statistically significant. Also the differences of soil invertebrates diversity (Shannon-Wiener and Simpson indices) were not statistically significant in the studied stages. The decreasing of soil invertebrates diversity (Shannon-Wiener index) in these treatments was respectively as optimal, initial and decay. This research emphasizes the values of natural regeneration, plant and soil invertebrates diversity in optimal stage is better than initial and decay stages.}, keywords = {Beech forest,Decay,Evenness,Initial,Optimal,Richness}, title_fa = {ارزیابی تنوع گیاهان و بی‌مهرگان خاک‌زی در مرحله‌های تحولی تودۀ طبیعی راش، جنگل هفت‌خال در شرق مازندران}, abstract_fa = {این تحقیق با هدف بررسی مشخصه‌های زادآوری طبیعی، تنوع گیاهان و بی‌مهرگان خاک‌زی در مرحله‌های تحولی توده‌های راش شامل مراحل اولیه، اوج و پوسیدگی انجام گرفت. در این بررسی در جنگل‌های دست‌نخوردۀ هفت‌خال مازندران سه قطعۀ یک‌هکتاری از هر مرحلۀ تحولی و در هر قطعه نمونه،10ریز‌قطعه نمونۀ 100 متر مربعی به‌صورت منظم تصادفی انتخاب شد. اندازه‌گیری مشخصه‌های زادآوری طبیعی، تنوع گیاهان و بی‌مهرگان خاک‌زی در ریز‌قطعه نمونه‌ها انجام گرفت. نتایج این پژوهش نشان می‌دهد که بیشترین تراکم زادآوری طبیعی در مرحلۀ تحولی اوج بود (5/7 اصله در 100 متر مربع)، ولی در دو مرحلۀ اولیه (8/2 اصله در 100 متر مربع) و پوسیدگی (9/2 اصله در 100 متر مربع) اختلاف معنی‌دار نبود. براساس شاخص تنوع شانون- وینر، بیشترین تنوع گیاهی در مرحلۀ تحولی اوج (375/2) و کمترین تنوع در مرحلۀ تحولی پوسیدگی (929/1) وجود داشت. البته مقدار این شاخص در مرحلۀ اولیه (106/2) با دیگر مرحله‌های تحولی اختلاف معنی‌داری نداشت. همچنین از نظر تنوع بی‌مهرگان خاک‌زی، شاخص‌های شانون- وینر و سیمپسون در بین مرحله‌های تحولی اختلاف معنی‌داری وجود نداشت. تغییر تنوع بی‌مهرگان خاک‌زی شانون- وینر نیز به‌ترتیب نزولی شامل مرحله‌های تحولی اوج، اولیه و پوسیدگی بود. در مجموع نتایج این تحقیق نشان داد که فراوانی زادآوری طبیعی، تنوع پوشش گیاهی و تنوع بی‌مهرگان خاک‌زی در مرحلۀ تحولی "اوج"، شرایط مناسب‌تری از مراحل تحولی "اولیه" و "پوسیدگی" داشت.}, keywords_fa = {اوج,اولیه,پوسیدگی,جنگل راش,غنا,یکنواختی}, url = {https://jfwp.ut.ac.ir/article_68879.html}, eprint = {https://jfwp.ut.ac.ir/article_68879_3f6329347ffe195c910758f62700e48f.pdf} } @article { author = {Deljouei, A. and Abdi, E. and Majnounian Garagiz, Baris and Schwarz, M.}, title = {Comparing roots mechanical characteristics of hornbeam trees in different diameter at breast height classes}, journal = {Forest and Wood Products}, volume = {71}, number = {3}, pages = {199-207}, year = {2018}, publisher = {University of Tehran}, issn = {5052-2008}, eissn = {2383-0530}, doi = {10.22059/jfwp.2018.251075.891}, abstract = {Quantifying the mechanical properties of roots is one of the most important issues in stabilizing slopes and modeling soil reinforcement. The aim of this study was to estimate the mechanical properties of hornbeam trees in three stem diameter classes include small, medium, and large trees in Patom district of Kheyrud forest. For this purpose, number of five trees in small (7.5-32.5 cm), medium (32.5-57.5 cm) and large (57.5-82.5 cm) diameter classes were selected and roots on both up and down sides (slope of 20-30 percent) of the trees were collected, then placed between two jaws of the Instron machine. Tensile strength test and tensile force were performed. The results showed that there is a positive power relationship between root diameter and tensile force. In all stem diameter classes at both sides of trees, tensile strength decreases by increasing root diameter based on negative power function. The results of covariance analysis showed that tensile force and tensile strength were significantly different among three stem diameter classes. Tensile force was higher in medium and small trees at up and down sides, respectively. While, in large trees tensile force in downside was more than upside. In medium trees, tensile strength were significantly higher in upside and downside (F=12.9, P<0.05) than small and large trees. Covariate factor (root diameter) was significant in all cases. The results of this study showed that stem diameter of trees and up and down sides of the trees affect the tensile force and tensile strength of hornbeam trees and it is possible to change the amount of tensile strength with age. Therefore, it is necessary to investigate changes in roots mechanical properties in different ages of trees in order to modeling the slope stability.}, keywords = {Kheyrud forest,Bioengineering,Root tensile strength,Root tensile force}, title_fa = {مقایسۀ ویژگی‌های مکانیکی ریشۀ درختان ممرز در طبقه‌های قطری مختلف}, abstract_fa = {کمّی‌سازی ویژگی‌های مکانیکی ریشه از مسائل مهم در مشکلات مربوط به پایداری دامنه‌ها و مدل‌سازی پایداری خاک است. هدف این پژوهش، برآورد ویژگی‌های مکانیکی ریشۀ گونۀ ممرز در سه طبقۀ کم‌قطر، میان‌قطر و قطور در بخش پاتم جنگل خیرود بود. بدین منظور پنج درخت از سه طبقۀ قطری کم‌قطر (5/7 تا 5/32 سانتی‌متر)، میان‌قطر (5/32 تا 5/57 سانتی‌متر) و قطور (5/57 تا 5/72 سانتی‌متر) انتخاب شد. نمونه‌های ریشه در دو سمت بالا و پایین (شیب 30-20 درصد) درختان جمع‌آوری شد و سپس میان دو فک دستگاه اینسترون قرار گرفت و آزمایش مقاومت کششی انجام پذیرفت و نیروی کششی ریشه‌ها ثبت شد. نتایج نشان داد که میان قطر ریشه و نیروی کششی، رابطۀ توانی مثبت و میان قطر ریشه و مقاومت کششی، تابع توانی منفی برقرار بود. بیشینۀ نیروی کششی در درختان میان‌قطر در سمت بالا و در درختان طبقۀ قطور و کم‌قطر در سمت پایین درخت مشاهده شد. در طبقۀ میان‌قطر، مقاومت کششی به‌طور معنی‌داری در سمت بالا و پایین بیشتر از دو طبقۀ دیگر بود و عامل کوواریت (قطر ریشه) در همۀ موارد معنی‌دار بود. نتایج این پژوهش نشان داد که عامل قطر درختان و همچنین سمت دامنه بر نیروی کششی و مقاومت ریشۀ درختان ممرز تأثیرگذار است و امکان تغییر در مقدار مقاومت کششی ریشه با افزایش سن وجود دارد؛ بنابراین پیشنهاد می‌شود که بررسی تغییرات ویژگی‌های مکانیکی ریشۀ درختان در قطرهای مختلف، در مدل‌سازی‌های پایداری دامنۀ خاک در نظر گرفته شود.}, keywords_fa = {جنگل خیرود,زیست‌مهندسی,مقاومت کششی ریشه,نیروی کششی ریشه}, url = {https://jfwp.ut.ac.ir/article_68877.html}, eprint = {https://jfwp.ut.ac.ir/article_68877_556b8328225357b2b0979f53f248d998.pdf} } @article { author = {Hossienpour Asli, K. and Akbari, H. and lotfalian, M. and Shahedi, K. and Mohammadi Limaei, S.}, title = {Technical assessment of culverts diameter on forest roads (Case study: Dehga District, No 35 of Tonekabon Basin)}, journal = {Forest and Wood Products}, volume = {71}, number = {3}, pages = {209-219}, year = {2018}, publisher = {University of Tehran}, issn = {5052-2008}, eissn = {2383-0530}, doi = {10.22059/jfwp.2018.253621.902}, abstract = {Runoff generated by rain in forest areas and its flow on the roads can cause road damage and disrupt the operation and transportation. This research aims at minimizing the runoff damage to the road due to the flood by determining the optimal culverts diameter on the path of Tuska Kalam - Lyre Sar, Tonekabon, basin 35 in 23 forest sub-basins. Using the Curve Number method with different return periods, the maximum runoff flow of each sub-basin was calculated in cubic meters per second. Then, the optimal culvert diameter of the sub-basins was determined by using the Nomograph for determination of the diameter of concrete pipes. The results showed that on the B3 sub-basin, the maximum runoff for the return periods of 5,10,25,50 and 100 years is 3.37, 4.48, 6.04, 7.29 and 8.63 cubic meter per second, respectively, in which the culverts diameter is not suitable for the maximum passage runoff above the 5-year return period. On the B23 sub-basin, the maximum runoff for the return periods of 5,10,25,50 and 100 years is 2.24, 2.98, 4.02, 4.86 and 5.75 cubic meters per second, respectively, in which the culverts diameter, for the maximum passage runoff different return periods, is more than optimal. On the B9 sub-basin, the maximum runoff for the return periods of 5,10,25,50 and 100 years is 2.8, 3.73, 5.02, 6.06 and 7.17 cubic meters per second, respectively, in which the culverts diameter, for the maximum passage runoff different return periods, is optimal.}, keywords = {Culvert,Curve number method,Maximum runoff,Return period,Sub-basin}, title_fa = {ارزیابی فنی قطر آبروهای موجود در جاده‌های جنگلی (مطالعۀ موردی: سری دهگا حوضۀ 35 تنکابن)}, abstract_fa = {رواناب تولیدشده بر اثر بارندگی در مناطق جنگلی و جریان آن روی جاده‌ها می‌تواند عامل تخریب جاده‌ها و اختلال در عبور از آن و مدیریت جنگل شود. تحقیق حاضر با هدف به حداقل رساندن خسارات رواناب به جاده در اثر سیلاب، با تعیین قطر بهینۀ آبروها انجام گرفت. بدین منظور مطالعه‌ای در مسیر جادۀ توسکا کلام – لیره‌سر از حوضۀ 35 تنکابن در 23 زیرحوضۀ جنگلی انجام گرفت. با استفاده از روش شمارۀ منحنی، حداکثر دبی رواناب برای دوره‌های بازگشت مختلف هر یک از زیرحوضه‌ها، برحسب متر مکعب بر ثانیه محاسبه شد. سپس با استفاده از نموگراف تعیین قطر لوله‌های سیمانی، قطر بهینۀ آبروهای زیرحوضه‌ها به‌دست آمد. نتایج نشان داد که در زیرحوضۀ B3 حداکثر دبی رواناب برای دوره‌های بازگشت 5، 10، 25، 50 و 100 ساله به‌ترتیب 37/3، 48/4، 04/6، 29/7 و 63/8 متر مکعب بر ثانیه است که قطر آبروی موجود آن، برای عبور حداکثر دبی رواناب بیشتر از دورۀ بازگشت 5 ساله مناسب نیست و در زیرحوضۀ B23 حداکثر دبی رواناب برای دوره‌های بازگشت‌ 5، 10، 25، 50 و 100 ساله به‌ترتیب 24/2، 98/02،2/4، 86/4 و 75/5 متر مکعب بر ثانیه است که قطر آبروی موجود آن، برای عبور حداکثر دبی رواناب برای دوره بازگشت‌های مختلف بیش از مقدار بهینه است؛ در زیرحوضۀ B9 حداکثر دبی رواناب برای دوره‌های بازگشت‌ 5، 10، 25، 50 و 100 ساله به‌ترتیب 8/2، 73/3، 02/5، 06/6 و 17/7 متر مکعب بر ثانیه است که قطر آبروی موجود آن، برای عبور حداکثر دبی رواناب برای دوره‌های بازگشت‌ مختلف دارای مقدار بهینه است.}, keywords_fa = {آبرو,حداکثر دبی رواناب,دورۀ بازگشت,روش شمارۀ منحنی,زیرحوضه}, url = {https://jfwp.ut.ac.ir/article_68883.html}, eprint = {https://jfwp.ut.ac.ir/article_68883_2b1a1193c773ae0c0cc24ee172bbc676.pdf} } @article { author = {Habashi, H. and Shabani, E. and Moslehi, M.}, title = {Investigation on the base cation variations in throughfall and litterflow of Acer velutinum in the Caspian forest}, journal = {Forest and Wood Products}, volume = {71}, number = {3}, pages = {221-230}, year = {2018}, publisher = {University of Tehran}, issn = {5052-2008}, eissn = {2383-0530}, doi = {10.22059/jfwp.2018.257096.923}, abstract = {The aim of this study was to evaluate the changes of chemical (calcium, (Ca2+), sodium (Na+) and potassium (K+)) of the canopy and litter leaching of Velvet maple (Acer velutinum Boiss) during a year against those nutrients in rainfall (RF). Measurements were carried out in mixed stands, located in district one offorest research station of Gorgan University, the eastern Caspian forests of Iran. In order to perform the research, three Velvet mapletrees were selected in 0.5 ha stand and throughfall (TF) (405 samples) and litterflow (LF) (243 samples) were sampled after each RF within a year from (2012/02/03) to (2013/02/03). The nutrients amounts in TF, LF and RF as well as monthly nutrient dynamics of TF and LF, were compared using t-test analysis and one way variance analysis at the 95 of confidence level. Results showed that the amounts of K+ and Ca2+ in TF were 134.83 and 0.19 kg ha-1 year-1, respectively, significantly higher than those in RF, however, the amount of Na+ was 52.27 kg ha-1 year-1, significantly lower than RF (p<0.05). Also, amounts of Na+ and Ca2+ in LF were 91.9 and 1.68 kg ha-1 year-1, respectively, significantly lower than those in RF. We found out that nutrient leaching of TF and LF was significantly different in several months. Velvet mapletrees can usefully improve the potassium contained in the soils. In order to select suitable species for afforestation, soil fertility improvement and forest management, we need to know more about leaching process information along with other characteristics of trees. }, keywords = {Base cations,Litter flow,Throughfall,Time variations}, title_fa = {بررسی تغییرات کاتیون‌های بازی در آبشویی تاج و لاشریزه گونۀ افراپلت در جنگل‌های هیرکانی}, abstract_fa = {هدف این تحقیق، بررسی تغییرات ماهانۀ آبشویی کاتیون‌های سدیم، پتاسیم و کلسیم در تاج و لاشریزۀ گونۀ افراپلت (Acer velutinum Boiss) در طول سال و همچنین مقایسۀ عناصر غذایی موجود در آب باران با تاج‌بارش و لاشریزه در تودۀ آمیخته، در سری یک جنگل شصت‌کلاتۀ استان گلستان است. بعد ازانتخاب 3 درخت شاخص افراپلت در یک تودۀ نیم‌هکتاری، نمونه‌های حاصل از آبشویی تاج (405 نمونه) و لاشریزه (243 نمونه) از بهمن 1390 تا بهمن 1391، بعد از هر بارندگی جمع‌آوری و بررسی شد. برای مقایسۀ مقدار عناصر آبشویی‌شده در تاج و لاشریزه با آب باران و همچنین تغییرات ماهانۀ عناصر آبشویی‌شده، به‌ترتیب از آنالیز آماری تی تست و آنالیز واریانس یکطرفه در سطح احتمال 95 درصد استفاده شد. نتایج نشان داد که مقادیر پتاسیم و کلسیم در تاج‌بارش به‌ترتیب 83/134 و 19/0 کیلوگرم در هکتار در سال بیشتر از مقدار آنها در آب باران بود، ولی سدیم 27/52 کیلوگرم در هکتار کمتر بود. همچنین مقادیر سدیم و کلسیم در آبشویی لاشریزه 9/91 و 68/1 کیلوگرم در هکتار در سال کمتر از مقادیر آنها در آب باران و پتاسیم 79/27 کیلوگرم در هکتار بیشتر از آب باران بود. مقدار آبشویی عناصر در آبشویی تاج و لاشریزه در ماه‌های مختلف، به‌طور معنی‌داری متفاوت بودند. براساس نتایج می‌توان از گونۀ افراپلت برای بهبود خاک‌های دچار کمبود پتاسیم استفاده کرد. به‌منظور انتخاب گونۀ مناسب برای جنگلکاری، بهبود حاصلخیزی خاک و مدیریت بهینۀ جنگل، اطلاعات آبشویی در کنار ویژگی‌های دیگر درختان مورد نیاز است.}, keywords_fa = {آبشویی لاشریزه,تاج‌بارش,تغییرات زمانی,کاتیون‌های بازی}, url = {https://jfwp.ut.ac.ir/article_68886.html}, eprint = {https://jfwp.ut.ac.ir/article_68886_cc188ed52edb69f84a1bd60176a05ae4.pdf} } @article { author = {Narouie, S. and Jamalirad, L. and Aminian, H. and Hedjazi, S.}, title = {The properties of poly lactic acid green composites reinforced by tobacco stalk flour}, journal = {Forest and Wood Products}, volume = {71}, number = {3}, pages = {231-241}, year = {2018}, publisher = {University of Tehran}, issn = {5052-2008}, eissn = {2383-0530}, doi = {10.22059/jfwp.2018.237644.859}, abstract = {The main objective of this study was to replace the chemical polymers with natural and renewable polymer and subsequently reducing environmental concerns. In addition, the physical and mechanical properties of composites reinforced with tobacco stalk flour, were studied. For this purpose, the tobacco stalks flour and poly lactic acid contains30:70; 40:60, 50:50 and maleic anhydride grafted polypropylene as a coupling agent, in two levels of 4 wt% and 6 wt% were used as variable factors. The results showed that by increasing the amount of the tobacco stalk flour and reducing the content of PLA, the dimensional stability of the boards was decreased but the dimensional stability of boards made with PLA improved significantly compared to the polypropylene composites. In many cases, the mechanical properties of the composite were increased and even doubled than mechanical properties of the composite made with polypropylene. That's mean; the PLA's natural polymer did not damage the physical and mechanical properties of the wood-plastic composites, but also in some cases improves its properties up to 50% compared with chemical polymers. This natural and renewable polymer is environmentally friendly and the composite can be placed in a group of green composites.}, keywords = {biodegradable,Coupling agent,Mechanical properties,Poly lactic acid,Wood-plastic composite}, title_fa = {ویژگی‌های کامپوزیت سبز پلی‌لاکتیک‌اسید تقویت‌شده با آرد ساقۀ توتون}, abstract_fa = {این تحقیق با هدف جایگزینی پلیمرهای شیمیایی با پلیمر طبیعی و تجدید‌شونده و در پی آن کاهش مسائل زیست‌محیطی، خواص فیزیکی و مکانیکی کامپوزیت پلی‌لاکتیک‌اسید تقویت‌شده با آرد ساقۀ توتون بررسی شد. بدین منظور از نسبت‌های مختلف آرد ساقۀ توتون و پلیمر پلی‌لاکتیک‌اسید شامل 70:30، 60:40 و 50:50 و MAPP به‌عنوان مادۀ جفت‌کننده در دو سطح 4 و 6 درصد استفاده شد. نتایج نشان داد که با افزایش مقدار آرد توتون و کاهش سهم PLA پایداری ابعادی تخته‌های ساخته‌شده کاهش یافت، اما پایداری ابعادی تخته‌های ساخته‌شده با PLA در مقایسه با پلیمر پلی‌پروپیلن بهبود چشمگیری داشت. ویژگی‌های مکانیکی کامپوزیت حاصل، در موارد بسیاری افزایش یافت و حتی دوبرابر خواص مکانیکی کامپوزیت ساخته‌شده با پلی‌پروپیلن بود. یعنی پلیمر طبیعی PLA نه‌تنها سبب کاهش خواص فیزیکی و مکانیکی کامپوزیت چوب-پلاستیک نمی‌شود، بلکه در مواردی در مقایسه با پلیمرهای شیمیایی موجب بهبود 50 درصدی خواص آن می‌شود. این پلیمر طبیعی و تجدیدشونده، سازگار با محیط زیست است و کامپوزیت ساخته‌شده را می‌توان در گروه کامپوزیت‌های سبز قرار داد.}, keywords_fa = {پلی‌لاکتیک‌اسید,جفت‌کننده,خواص مکانیکی,زیست‌تخریب‌پذیر,کامپوزیت چوب-پلاستیک}, url = {https://jfwp.ut.ac.ir/article_68874.html}, eprint = {https://jfwp.ut.ac.ir/article_68874_ff91f604c43cfd33aca935077aac6577.pdf} } @article { author = {Soroush, A. F. and Ebrahimpour Kasmani, J. and Djafari Petroudy, S. R.}, title = {Rice straw capabilities for production of silica nanostructures}, journal = {Forest and Wood Products}, volume = {71}, number = {3}, pages = {243-252}, year = {2018}, publisher = {University of Tehran}, issn = {5052-2008}, eissn = {2383-0530}, doi = {10.22059/jfwp.2018.261146.943}, abstract = {Annually huge amount of un-used rice straw after rice harvesting were burned due to no specific utilization. Whereas,  based on the biorefinery concept there is possibility to use these agricultural residues for production of high value added products. So, this study was aimed to extract the silica from the rice straw (Oryza Sativa var Indica) as one of the important agro-industrial residues in the country and its capabilities for production of silica nanostructures based on the mentioned concept. After washing, drying and grinding of rice straw samples, some of them were separately leached with a hydrochloric acid and some ones with a sulphuric acid at concentration of 0.5 M for 30 min with constant stirring. Afterwards, the silica content of acid-leached and un-leached rice straw samples was measured in a muffle furnace with varying temperatures at 500,600, 700, 800 and 900°C for 2 h. The results were obtained from Energy Dispersive X-ray (EDX) and X-ray Fluorescence (XRF) demonstrated the maximum presence of silica into the rice straw ash. Two of aforementioned spectroscopy methods explored the higher content and purity of acid-leached rice straw samples in comparison to un-leached rice straw ones. The Field Emission Scanning Electron Microscopy (FESEM) images demonstrated that the prepared silica nanostructures had a spherical shape and their average particle sizes were 30 nanometer for un-leached rice straw samples and less than 12 nanometer for acid-leached ones.}, keywords = {: Ash,hydrochloric acid,rice straw,sulphuric acid,nanosilica}, title_fa = {قابلیت‌های تولید نانوساختار سیلیسی از کلش برنج}, abstract_fa = {هرساله حجم بسیار زیادی از کلش برنج پس از استحصال برنج به­دلیل نبود استفادۀ مشخص سوزانده می‌شود، درحالی که امکان استفاده از این ضایعات برای تولید محصولاتی با ارزش­ افزودۀ زیاد با در نظر گرفتن مفهوم پالایش زیستی وجود دارد. این تحقیق با­ هدف بررسی استخراج سیلیس از کلش برنج Oryza Sativa var Indica به‌عنوان یکی از مهم‌ترین ضایعات کشاورزی و تعیین قابلیت‌های آن برای تولید نانوساختار سیلیس انجام گرفت. بعد از شست‌وشو، خشک کردن و آسیاب کردن نمونه‌ها، بعضی از آنها به­صورت جداگانه در شرایط اسید‌شویی اسید سولفوریک و اسید کلریدریک با غلظت 5/0 مولار و به‌مدت 30 دقیقه (با هم زدن یکنواخت) قرار گرفتند. سپس مقدار سیلیس نمونه‌های اسید‌شویی‌شده و نمونه‌های بدون اسیدشویی در کوره با حرارت‌های 800،700،600،500 و900 درجۀ سانتی‌گراد به‌مدت دو ساعت اندازه‌گیری شد. نتایج طیف­سنجی پراش انرژی پرتو ایکس و فلورسانس پرتو ایکس، بیانگر وجود حداکثری سیلیس در خاکستر حاصل از کلش برنج بوده است. نتایج طیف‌سنجی‌ها نشان داد که درصد خلوص سیلیس در نمونه‌های با اسیدشویی، از نمونه‌های بدون اسیدشویی بیشتر است؛ این مقدار در نمونه‌های اسید کلریدریک بیش از 96 درصد بود. نتایج بررسی روبشی­گسیل ­میدانی با میکروسکوپ الکترونی نیز متوسط اندازۀ نانوسیلیس کروی 30 نانومتر را برای نمونه‌های بدون اسیدشویی و کمتر از 12 نانومتر را برای نمونه‌های اسیدشویی‌شده تأیید کرد.}, keywords_fa = {اسید‌ سولفوریک,اسید ‌کلریدریک,خاکستر,کلش ‌برنج,نانوسیلیس}, url = {https://jfwp.ut.ac.ir/article_68892.html}, eprint = {https://jfwp.ut.ac.ir/article_68892_0fdfc683dc7c4031411b928900096cb8.pdf} } @article { author = {Sharifi, S. H. and Nazarnezhad, N.}, title = {Optimization of effective parameters on ultrasonic pre-treatment in chemical deinking of old newspaper by the Response Surface Methodology}, journal = {Forest and Wood Products}, volume = {71}, number = {3}, pages = {253-262}, year = {2018}, publisher = {University of Tehran}, issn = {5052-2008}, eissn = {2383-0530}, doi = {10.22059/jfwp.2018.259838.932}, abstract = {Recently, paper recycling has been significantly increased for several reasons such as environmental concerns and coast-saving. Ultrasound is used in the paper industry at various stages. Deinking has an important and determinant role in the recycling of newspapers. The aim of this study was to conduct the process of deinking in order to improve the optical properties of newspaper as a cellulosic material by using ultrasonic pretreatment combined with chemical method. The hydrogen peroxide, sodium hydroxide, sodium silicate, poly sorbent 80, and Diethylenetriaminepentaacetic acid were utilized for chemical deinking. Effect of important parameters of ultrasonic pretreatments such as ultrasonic bath temperature and sonication time on deinking efficiency was investigated by using response surface methodology based on central composite design. After chemical treatment of obtained recycled pulps, maximum and minimum efficiency of deinking for hand sheet papers with 60 gsm grammage according to standard T 205om-88 were calculated about 88 and 45% respectively. Surface and 3D curves were created to show the interactions of the independent variables with response one (deinking efficiency). Based on the ANOVA test, the quadratic model presented the best explanation of variables interaction. Ultrasonic pretreatments increased brightness and decreased opacity of obtained recycled newspaper compared to the control ones. According to the statistical analysis, the effect of each variable on deinking efficiency was significant and sonication time was introduced as the most effective factor. In addition, 47 oC ultrasonic bath temperature and 31 min sonication time were determined as the optimal conditions for maximum deinking efficiency (86.95%).}, keywords = {Central composite design,Deinking,Old newspaper,RSM,Ultrasonic pretreatment}, title_fa = {بهینه‌سازی متغیرهای مؤثر پیش‌تیمار فراصوت بر جوهرزدایی شیمیایی کاغذ روزنامۀ باطله با روش سطح پاسخ}, abstract_fa = {در سال‌های اخیر، بازیافت کاغذ به دلایل متعددی از جمله نگرانی‌های زیست‌محیطی و صرفۀ اقتصادی افزایش چشمگیری یافته است. امواج فراصوت در صنعت کاغذسازی در مراحل مختلفی به‌کار گرفته می‌شود. جوهرزدایی تأثیر مهم و تعیین‌کننده‌ای در بازیافت کاغذ روزنامه دارد. هدف این پژوهش، جوهرزدایی با استفاده از پیش‌تیمار فراصوت به‌همراه روش شیمیایی برای بهبود خواص نوری کاغذهای روزنامه‌ به‌عنوان مادۀ اولیۀ سلولزی است. جوهرزدایی شیمیایی با استفاده از پراکسید هیدروژن، هیدروکسید سدیم، سیلیکات سدیم، پلی‌سوربات 80 و DTPA انجام گرفت. تأثیر متغیرهای مهم پیش‌تیمار فراصوت از جمله دمای حمام فراصوت و زمان قرارگیری در معرض امواج فراصوت بر بازده جوهرزدایی با استفاده از روش سطح پاسخ بر‌مبنای طراحی مرکب مرکزی بررسی شد. پس از تیمار شیمیایی خمیرهای کاغذ بازیافتی حاصل، بیشترین و کمترین درصد بازده جوهرزدایی کاغذ دست‌ساز ساخته‌شده بر‌اساس استاندارد 88-om 205T با گراماژ 60 گرم بر متر مربع، بـه‌ترتیـب 88 و 45 درصد محاسبه شد. منحنی‌های سطحی و سه‌بعدی برای نشان دادن اثر متقابل متغیرهای مستقل با متغیر پاسخ (بازده جوهرزدایی) ایجاد شد. آزمون آنالیز واریانس نشان داد که مدل نمایی، بهترین مدل برای تبیین برهم‌کنش متغیرهاست. پیش‌تیمار فراصوت به افزایش درجۀ روشنایی و کاهش ماتی کاغذ روزنامۀ بازیافتی حاصل در مقایسه با نمونۀ شاهد انجامید. براساس نتایج آزمون، تأثیر هریک از متغیرها در بازده جوهرزدایی معنی‌دار بود و زمان فراصوت، مؤثرترین عامل معرفی شد. شرایط بهینۀ برای دستیابی به بیشترین بازده جوهرزدایی (95/86 درصد) دمای حمام فراصوت 47 درجۀ سانتی‌گراد و زمان فراصوت 31 دقیقه تعیین شد.}, keywords_fa = {پیش‌تیمار فراصوت,جوهرزدایی,روزنامه باطله,روش سطح پاسخ,طرح مرکب مرکزی}, url = {https://jfwp.ut.ac.ir/article_68889.html}, eprint = {https://jfwp.ut.ac.ir/article_68889_be616eb8e7aeba71185f50917ca447ba.pdf} } @article { author = {Pourbaba, R. and Izadyar, S. and Hamzeh, Y. and Ashori, A.}, title = {Effect of using cellulose nanofibers and cellulosic papermaking fines simultaneously on the properties of de-inked recycled pulp}, journal = {Forest and Wood Products}, volume = {71}, number = {3}, pages = {263-273}, year = {2018}, publisher = {University of Tehran}, issn = {5052-2008}, eissn = {2383-0530}, doi = {10.22059/jfwp.2018.263073.952}, abstract = {The aim of this study was to enhance the physical and mechanical properties of deinked recycled paper by using the cellulose nanofibers (CNFs) and obtained fine fibers from pulp refining. The process was conducted in the presence of a cationic additive including cationic starch (group A), poly aluminum chloride (group B), or cationic polyacrylamide (group C). The Design Expert software was used to prepare the experimental design and analyzed the results. The results showed that by using fine fraction up to 16 wt% and cellulose nanofibers up to 7 wt%) with cationic starch (group A) the tensile strength was increased almost 44%, burst strength 53%, and water retention value of pulp (WRV) 35%. These values for treated pulp with group B were 41%, 48%, and 22% while, , for treated pulp with group C were 40%, 42% and 27%, respectively. However, those treatments increased the dewatering time from pulp and the highest increase in dewatering time was 47% when 16 wt% fine and 7 wt% cellulose nanofibers were used along with cationic starch. In addition,  increasing of dewatering time for treated pulp with group B and group C were 41% and 30%, respectively. The evaluation and comparison between different treatments indicated that the treatment of deinked recycled pulp with group C would be a suitable treatment, due to minimum adverse effect on pulp drainage time and considerable improvement of dry strengths.}, keywords = {Cationic polyelectrolyte,Cellulose nanofibers,Cellulosic fines,Pulp and paper properties}, title_fa = {تأثیر کاربرد همزمان نانوالیاف سلولزی و نرمه‌های کاغذسازی بر خواص خمیرکاغذ بازیافتی مرکب‌زدایی‌شده}, abstract_fa = {هدف این پژوهش، بهبود ویژگی‌های خمیرکاغذ بازیافتی مرکب‌زدایی‌شده با استفاده از کاربرد همزمان نانوفیبرهای سلولزی و نرمه‌های حاصل از پالایش خمیرکاغذ بازیافتی مرکب‌زدایی‌شده به‌همراه یک مادة کاتیونی شامل نشاستۀ کاتیونی (گروه الف)، پلی‌آلومینیوم‌کلرید (گروه ب) و پلی‌آکریل‌آمید کاتیونی (گروه ج) بود. از نرم‌افزار طراحی آزمایش برای تهیۀ طرح آزمایش‌ها و تحلیل نتایج استفاده شد. خواص مقاومتی کاغذ دست‌ساز شامل شاخص‌های مقاومت کششی و ترکیدگی و خواص فیزیکی خمیرکاغذ شامل میزان نگهداری آب الیاف و زمان آبگیری از خمیرکاغذ ارزیابی شد. نتایج نشان داد که افزایش نرمه به ‌میزان 16 درصد و نانوفیبرسلولزی به میزان 7 درصد به‌همراه نشاستة کاتیونی (گروه الف)، سبب افزایش شاخص‌های مقاومت کششی و مقاومت ترکیدگی کاغذ و میزان نگهداری آب الیاف به‌ترتیب تا 44، 53 و 35 درصد شد. افزایش این مقادیر برای گروه ب (پلی‌آلومینیوم‌کلرید) به‌ترتیب 41، 48 و 22 درصد و برای گروه ج (پلی‌اکریل‌آمید کاتیونی) به‌ترتیب 40، 42 و 27 درصد شد. این تیمارها سبب افزایش زمان آبگیری از خمیر کاغذ شد که بیشترین افزایش زمان آبگیری به مقدار 46 درصد در اثر استفاده از 16 درصد نرمه و 7 درصد نانوفیبر سلولزی به‌همراه نشاستة کاتیونی به‌دست آمد. افزایش زمان آبگیری برای تیمارهای گروه ب (پلی‌آلومینیوم‌کلرید) و تیمارهای گروه ج (پلی‌آکریل‌آمید کاتیونی) به‌ترتیب 41 و 30 درصد بود. با توجه به اثرهای مطلوب و نامطلوب، کاربرد همزمان نرمه‌های کاغذسازی و با نانوالیاف سلولزی همراه با مادة کاتیونی پلی‌اکریل‌آمید کاتیونی می‌تواند به‌عنوان تیمار مناسب برای افزایش خواص مکانیکی کاغذهای بازیافتی در نظر گرفته شود.}, keywords_fa = {مادة کاتیونی,نانوفیبر سلولزی,نرمه‌های سلولزی,ویژگی‌های خمیر و کاغذ}, url = {https://jfwp.ut.ac.ir/article_68895.html}, eprint = {https://jfwp.ut.ac.ir/article_68895_9a2b3c94c73444271feba5165e005068.pdf} }