@article { author = {Erfanifard, Yousef and Naziry, Farnoush}, title = {Comparison of Ripley's K-, pair correlation, and O-ring functions in spatial pattern analysis of Christ's thorn jujube trees (Ziziphus spina-christi) in Fars province}, journal = {Forest and Wood Products}, volume = {70}, number = {1}, pages = {1-9}, year = {2017}, publisher = {University of Tehran}, issn = {5052-2008}, eissn = {2383-0530}, doi = {10.22059/jfwp.2017.61608}, abstract = {Understanding the underlying processes in spatial pattern of trees is an important goal in forest ecology. The first step in characterizing these spatial patterns is to use appropriate summary statistics. This study was aimed to compare four univariate second-order summary statistics (Ripley's K-, L-, pair correlation and O-ring functions) in spatial pattern analysis of Christ's thorn jujube trees (Ziziphus spina-christi) in Fars province. All individual trees with height more than 1 m were mapped in a 200 × 200 m2 plot. Two other point patterns were also generated with similar density and different spatial distributions from the true pattern. The observed pattern of trees showed no spatial heterogeneity as compared to homogeneous Poisson process. The results showed that K- and L-functions did not reveal the clustering of Christ's thorn jujube trees in different spatial scales as shown by pair correlation function and O-ring statistic because of their cumulative structure. The range of dispersion resulted from K- and L-functions (20 m) did not conform the results of pair correlation function and O-ring statistic (11 m). Comparison of mean squared error also showed that O-ring function had the least amount compared to pair correlation, L- and K-functions in all three plots. In general, pair correlation function and O-ring statistic were more precise and efficient than K- and L-functions in analyzing the pattern of Christ's thorn jujube trees in this study.}, keywords = {Ripley's K-function,O-ring statistic,Pair correlation function,Christ's thorn jujube,mean squared error}, title_fa = {مقایسه تابع‌های K رایپلی، همبستگی جفتی و O-ring در تحلیل الگوی مکانی درختان کنار (Ziziphus spina-christi) در استان فارس}, abstract_fa = {درک فرآیندهای نهفته در الگوی مکانی درختان یک هدف مهم در بوم­شناسی جنگل است که نخستین گام در شناسایی این الگوهای مکانی، استفاده از آماره­های اختصاری مناسب است. این پژوهش با هدف مقایسه چهار آماره اختصاری درجه دوم تک­متغییره (تابع­های K رایپلی، L، همبستگی جفتی و O-ring) در تحلیل الگوی مکانی درختان کنار (Ziziphus spina-christi) در استان فارس انجام شد. تمام درختان با ارتفاع بیش از یک متر در یک قطعه نمونه 200 × 200 مترمربعی نقشه­برداری شدند. دو الگوی نقطه­ای دیگر با تراکم مشابه و توزیع مکانی متفاوت از الگوی واقعی نیز ساخته شدند. مقایسه با فرایند پوآسون همگن نشان داد که الگوی مشاهده شده درختان فاقد ناهمگنی مکانی بود. نتایج نشان داد که دو تابع K و L به دلیل ماهیت تجمعی­شان، کپه­ای بودن درختان کنار در مقیاس­های مکانی مختلف را چنانچه دو تابع همبستگی جفتی و O-ring نشان دادند، شناسایی نکردند. همچنین دامنه پراکندگی درختان به دست آمده از دو تابع K و L (20 متر) با نتایج دو تابع همبستگی جفتی و O-ring (11 متر) مطابقت نداشت. مقایسه میانگین مربعات خطا نیز نشان داد که آماره O-ring دارای حداقل مقدار خطا در مقایسه با تابع­های همبستگی جفتی، L و K در هر سه قطعه­نمونه بود. به­طور کلی، دو تابع همبستگی جفتی و O-ring از دقت و کارایی بیشتری نسبت به تابع­های K و L در تحلیل الگوی درختان کنار در این پژوهش برخوردار بوده­اند. }, keywords_fa = {تابع K رایپلی,آماره O-ring,تابع همبستگی جفتی,کنار,میانگین مربعات خطا}, url = {https://jfwp.ut.ac.ir/article_61608.html}, eprint = {https://jfwp.ut.ac.ir/article_61608_242b67cf872e9012d0effa37563dce5f.pdf} } @article { author = {Taherzadeh, Maryam}, title = {Studying the nutritional content in graded Oak seedlings (Quercus castaneifolia)}, journal = {Forest and Wood Products}, volume = {70}, number = {1}, pages = {11-20}, year = {2017}, publisher = {University of Tehran}, issn = {5052-2008}, eissn = {2383-0530}, doi = {10.22059/jfwp.2017.61612}, abstract = {The production of good quality seedlings and increased performance are essential to the success of any plantation program. In order to develop a mechanism to evaluate the quality of nursery seedlings prior to planting in the field, production of good quality seedlings in nursery has important role in successful reforestation projects. Seedling sizes and nutrition status are two important factors in good quality seedlings. For these reasons, in this study nutrient concentration and content of nitrogen, phosphorous, calcium  and potassium in roots and leaves of graded Oak seedlings (small, medium and large) sampled in two-stage  sampling at the end of the first growing season (early September 2010 and late February 2011) were measured. The aim of this study is to know different levels of these nutrients in graded seedlings. The results showed there was not significant difference between nutrients in leaves and roots of graded seedlings in September and February, respectively.  But higher seedlings had higher nutrient concentration rather than the smaller ones in February thanks to having more ability for absorption of nutrients .The content of nutrients in big and medium seedlings is more than small-sized ones.}, keywords = {Quercus castaneifolia,Evaluation of seedling quality؛ Nutrient material؛ Morphologically graded seedlings}, title_fa = {بررسی میزان عناصر غذایی در نهال‌های درجه‌بندی‌شدۀ بلندمازو (Quercus castaneifolia)}, abstract_fa = {تولید نهال با کیفیت مناسب و افزایش عملکرد برای موفقیت هر جنگلکاری ضروری است. ازآنجا که از عوامل مختلفی برای ارزیابی کیفیت نهال جنگلی استفاده می‌شود، در این تحقیق از ارزیابی میزان وجود برخی از عناصر غذایی در ارتباط با اندازۀ نهال استفاده شد. نمونه‌برداری نهال در دو زمان، یکی در اوایل شهریور و دوم در اسفند از پلات‌های تصادفی به ابعاد 30 ×30 سانتی‌متر در بستر خزانه انجام گرفت. پس از درجه‌بندی نهال‌ها برمبنای قطر یقۀ نهال، برای اندازه‌گیری عناصر غذایی از هر درجۀ قطری، وزن مشخصی از نمونه‌های ریشه و برگ پنج نهال جدا از هم آسیاب و پودر شد. اندازه‌گیری نیتروژن به روش کجلدال صورت گرفت و برای اندازه‌گیری فسفر و پتاسیم در عصارۀ حاصل از هضم به طریق سوزاندن خشک و استفاده از اسید کلریدریک پس از رساندن نمونه به حجم 50 میلی‌لیتر، غلظت عناصر به‌کمک دستگاه فلیم فتومتر مشخص شد. عنصر کلسیم در عصارۀ حاصل از هضم به روش سوزاندن خشک و استفاده از اسید کلریدریک و به‌کمک دستگاه جذب اتمی اندازه‌گیری شد. نتایج نشان داد که تفاوت معنی‌داری بین غلظت مواد غذایی در برگ‌ نهال‌های درجه‌بندی‌شده در اوایل شهریور و ریشۀ آنها در اسفند وجود ندارد؛ اما غلظت مواد غذایی در ریشۀ نهال‌های بزرگ‌تر در اوایل شهریور بیشتر از نهال‌های کوچک‌تر بود. دلیل آن توانایی بیشتر این نهال‌ها برای جذب مواد غذایی به‌منظور رشد بیشتر خود در نهالستان است. مقدار مواد غذایی در نهال‌های بزرگ‌تر بیشتر از کوچک‌ترها بود.}, keywords_fa = {بلند‌مازو,ارزیابی کیفیت نهال,مواد غذایی,نهال‌های درجه‌بندی شده}, url = {https://jfwp.ut.ac.ir/article_61612.html}, eprint = {https://jfwp.ut.ac.ir/article_61612_f8a9a2adc52b44b56ef0214f3329d834.pdf} } @article { author = {Yousefzadeh, Hamed and Momeni, Hura and Hoseini, Mohsen}, title = {The effect of Viscum album L. on stomatal characteristics, fluctuating asymmetry and specific leaf area of Parrotia persica}, journal = {Forest and Wood Products}, volume = {70}, number = {1}, pages = {21-29}, year = {2017}, publisher = {University of Tehran}, issn = {5052-2008}, eissn = {2383-0530}, doi = {10.22059/jfwp.2017.61613}, abstract = {This study was conducted to investigate the devastating impact of Mistletoe (Viscum album L.) on asymmetry index and leaf characteristics of Ironwood (Parrotia persicaDC.) in Tamishan Forest, Noor, Iran. For this purpose, 20 Ironwood trees were selected inside and outside of the forest. The results showed that the highest and lowest values of leaf area and specific leaf area were observed in healthy and infected trees, respectively, both inside and outside of the forest. Stomatal characteristics of diameter, area and density also varied depending on location of trees and branch types (healthy or infected). Analysis of variance (ANOVA) indicated that the effect of left or right sides of leaves (sides) and trees were significant, while the interaction between side×trees was not significant. The difference between left and right sides of leaves were also significantly affected by location of trees and branches types.  Generally, this study showed that the presence of mistletoe influenced the asymmetry index and have been caused to changes in the morphology of the infected trees. Finally, due to nutrition importance of Viscum album for animal to prevent from death of host trees, mechanical removing of Viscum album from host trees with high density is recommended. }, keywords = {Parrotia persica,Stress,Host trees,asymmetry index}, title_fa = {تأثیر دارواش بر صفات روزنه، عدم تقارن و شاخص ویژة سطح برگ گونة انجیلی}, abstract_fa = {تحقیق حاضر به‌منظور کسب شواهدی مبنی بر تأثیر مخرب دارواش بر شاخص عدم تقارن و خصوصیات برگ درخت انجیلی در جنگل جلگه‌ای تمیشان نور انجام پذیرفت. برای این هدف، 20 پایه انجیلی در دو موقعیت داخل و خارج توده، در جنگل تمیشان نور انتخاب شد. صفات مساحت ویژة برگ، روزنه و شاخص عدم تقارن اندازه‌گیری شد. نتایج نشان داد که مساحت برگ و سطح ویژة برگ در هر دو موقعیت در شاخة درختان سالم بیشترین و در شاخه‌های سالم و آلوده درختان آلوده کمترین مقدار را نشان داد. خصوصیات روزنه نیز بسته به موقعیت قرارگیری درختان و نوع شاخه (سالم و آلوده) با یکدیگر متفاوت بود. آنالیز واریانس نشان داد که اثر جهت که بیانگر عدم تقارن جهت‌دار و اثر پایه که بیانگر تغییرات پایه‌هاست، معنی‌دار است. بررسی اختلاف اندازة دو نیمۀ چپ و راست برگ نشان داد این صفت تحت تأثیر معنی‌دار موقعیت قرارگیری درخت و نیز نوع شاخه است. به‌طور کلی نتایج این تحقیق نشان داد درختان انجیلی آلوده به دارواش واقع در حاشیة توده بیشترین تغییرات را در ریخت‌شناسی برگ خود ایجاد کردند. در پایان پیشنهاد می‌شود با توجه به ارزش تغذیه‌ای دارواش برای دام، به‌منظور‌ جلوگیری از خشک شدن درخت میزبان، با مدیریت متمرکز بر درختان با آلودگی بسیار زیاد، اقدام به برداشت و حذف دارواش از روی درخت انجیلی شود.}, keywords_fa = {انجیلی,شاخص‌عدم تقارن,تنش,درختان میزبان}, url = {https://jfwp.ut.ac.ir/article_61613.html}, eprint = {https://jfwp.ut.ac.ir/article_61613_ece0dc063f4a55741182850e869ae39a.pdf} } @article { author = {Kazemi, Marziye and Abdi, Ehsan and Majnounian, Baris and Yousefzadeh, Hamed}, title = {The effect of Persian oak species (Quercus persica) in soil reinforcement (Case Study: Tabarok, Bazaft basin)}, journal = {Forest and Wood Products}, volume = {70}, number = {1}, pages = {31-38}, year = {2017}, publisher = {University of Tehran}, issn = {5052-2008}, eissn = {2383-0530}, doi = {10.22059/jfwp.2017.61607}, abstract = {Vegetation enhances the soil resistance against instability and erosion through increasing the soil cohesion. The main effect of vegetation in stability improvement is soil reinforcement by roots. The amount of reinforcement depends on distribution and strength of roots. The aim of this study was to assess the quantity of these two parameters of Persian oak roots and also comparing the tensile strength and reinforcement effect of roots in winter and summer seasons. Damage survey method was used to assess the distribution of roots. The diameters of all roots in trenches were measured by a digital caliper. Some root specimens were randomly selected from five tree samples and their tensile strengths were measured using a standard Instron. The range of root diameter and corresponding force and tensile strength were 0.1-5.5 mm, 1.3-411.3 N and 0.93-1217.39 MPa, respectively. Maximum and minimum root densities were in 0-10 and 50 cm soil horizons. The maximum reinforcement effect was belong to winter and 0-10 cm horizon. Minimum and maximum reinforcement effects for winter season were 0.0001 and 3.37 and 0.0004 and 2.87 MPa for summer.}, keywords = {season effect,Tensile Strength,tensile force,Root Area Ratio}, title_fa = {نقش گونۀ بلوط ایرانی (Quercus persica) در مسلح‌‌‌‌‌سازی خاک (مطالعۀ موردی: منطقۀ تبرک، حوضۀ بازفت)}, abstract_fa = {پوشش‌ ‌‌گیاهی با افزایش چسبندگی خاک، سبب افزایش مقاومت خاک در برابر حرکات توده‌‌ای و فرسایش می‌‌شود. مهم‌‌ترین تأثیر پوشش گیاهی در پایداری، سازوکار مسلح‌‌سازی توسط ریشه‌‌هاست. میزان مسلح‌‌‌‌‌‌سازی به تراکم و مقاومت کششی سیستم ریشۀ گیاهان بستگی دارد. هدف این پژوهش، بررسی دو پارامتر مقاومت کششی و تراکم ریشۀ گونۀ بلوط ایرانی و مقایسۀ مقاومت کششی و میزان مسلح‌سازی این گونه در دو فصل زمستان و تابستان است. برای برآورد نسبت سطح ریشه به خاک و پراکنش ریشه‌‌ها در افق‌‌‌های مختلف از روش سیستم بیرون‌زدۀ ریشه‌ها در اثر فرسایش استفاده و قطر کلیۀ ریشه‌های دیواره اندازه‌‌‌گیری شد. همچنین نمونه‌‌های ریشه به‌‌‌طور تصادفی از پنج پایه بلوط جمع‌‌آوری و مقاومت کششی آنها با دستگاه اینسترون استاندارد اندازه‌‌‌گیری شد. مقدار کمینه و بیشینۀ نسبت سطح ریشه به خاک به‌ترتیب 0002/0 درصد و 93/27 درصد مشاهده شد. دامنۀ قطری ریشه‌های آزمایش‌شده برای آزمایش مقاومت ریشه، 5/5- 1/0 میلی‌متر، دامنۀ نیروی کشش  3/411- 3/1 نیوتن و دامنۀ مقاومت کششی 85/3503 – 93/0 مگاپاسکال بود. بیشترین نسبت سطح ریشه به خاک در عمق 10-0 سانتی‌‌‌متر و کمترینِ آن در عمق 50 سانتی‌‌‌متری دیده شد. با استفاده از این نتایج، میزان مسلح‌سازی در دو فصل محاسبه و مشاهده شد که بیشترین میزان مسلح‌‌سازی مربوط به فصل خزان و در افق 10 سانتی‌‌‌متر است. کمترین و بیشترین میزان مسلح‌‌سازی در فصل رویش به‌ترتیب 0001/0 و 87/2 کیلوپاسکال و در فصل خزان به‌ترتیب 0004/0 و 37/3 کیلوپاسکال به‌دست آمد.}, keywords_fa = {تاثیر فصل,مقاومت‌کششی,نیروی کششی,نسبت سطح ریشه}, url = {https://jfwp.ut.ac.ir/article_61607.html}, eprint = {https://jfwp.ut.ac.ir/article_61607_591a831f5657dd341425550ee43342d5.pdf} } @article { author = {Petrosian, Hasti and Danekar, Afshin and Ashrafi, Sohrab and Feghhi, jahangir}, title = {Analysis of Rhizophora mucronata habitat condition by comparing environmental variables in mangrove forest of Sirik, Minab and Jask habitats in coastline of Oman Sea}, journal = {Forest and Wood Products}, volume = {70}, number = {1}, pages = {39-48}, year = {2017}, publisher = {University of Tehran}, issn = {5052-2008}, eissn = {2383-0530}, doi = {10.22059/jfwp.2017.61609}, abstract = {Rhizophora mucronata forest stands are among the unique mangrove association in the coastline of southern Iran. These stands along with Avicennia marina constitute the only mixed mangrove forest in Sirik site. Despite the long-standing presence of Rhizophora mucronata among mangrove forests of Iran, few studies have been done about its habitat conditions. Understanding these conditions and their comparison with the environmental characteristics of adjacent habitats, could help to identify the leading factors in presence of Rhizophora mucronata only in Sirik habitat. For this purpose, based on the same experiences in Iran and other countries, 14 effective indices on distribution of R. mucronata were recognize and mapped. Such indices as tidal zone, temperature properties, annual rainfall, climate, seawater salinity, soil acidity, wave, substrate, and slope of habitat are among the indices considered in this study. The prepared maps were exported into GIS software. Then, 5% of each map in Sirik, Jask and Minab habitats was randomly selected for exploring the Pearson correlation coefficient and normality test via Kolmogrov-Smirnov test by using Minitab 16 software. The environmental conditions of the mentioned habitats were compared by using independent t-test. The results showed that there are significant difference between fluctuation of temperature, wave height, average maximum flooding level, water salinity and pH of soil in Sirik habitat (with R.mucronata species) and Jask and Minab (without R. mucronata species).}, keywords = {Environmental indices,Jask,Sirik,Rhizophora mucronata species,Minab}, title_fa = {تحلیل رویشگاه چندل از طریق تطبیق ویژگی‌های محیطی جنگل‌های مانگرو در سواحل دریای عمان}, abstract_fa = {توده‌های جنگلی چندل (Rhizophora mucronata) از جمله اجتماعات گیاهی منحصربه‌فرد مانگرو در کرانه‌های ساحلی جنوب کشور است که در رویشگاه سیریک به‌همراه اجتماعات درختان حرا (Avicennia marina) تنها تودۀ آمیخته مانگرو را در کشور پدید آورده است. به‌رغم حضور دیرینۀ اجتماعات چندل در میان مانگروهای کشور، تاکنون بررسی‌های اندکی در مورد شرایط رویشگاهی آن صورت گرفته و این در حالی است که شناخت این شرایط و مقایسة آن با ویژگی‌های محیطی رویشگاه‌های مانگرو همجوار، به شناخت عواملی کمک می‌کند که سبب شده گونة چندل تنها در رویشگاه سیریک حضور داشته باشد. به همین منظور با بررسی تجربیات مشابه در ایران و جهان، 14 شاخص مؤثر بر پراکنش گونة چندل شناسایی و از هر یک نقشۀ رستری تهیه شد. پهنة جزرومدی، ویژگی‌های دمایی، بارش سالانه، نوع اقلیم، شوری آب دریا، اسیدیتة خاک، موج، جنس بستر و شیب رویشگاه نمونه‌ای از شاخص‌هایی بودند که در فرایند این مطالعه در نظر گرفته شدند. سپس 5 درصد هر یک از نقشه‌ها در رویشگاه‌های هدف نمونه‌برداری شد و همبستگی میان متغیرهای محیطی با استفاده از ضریب همبستگی پیرسون، و نرمال بودن متغیرهای کمّی با استفاده از آزمون کولموگروف- اسمیرنوف سنجیده شد. آزمون تی مستقل نیز برای مقایسۀ شرایط محیطی رویشگاه‌های یادشده استفاده شد. نتایج نشان داد که تفاوت معنی‌داری بین نوسان دما، متوسط حداکثر آب‌گرفتگی در هنگام مد، ارتفاع موج، دامنۀ شوری آب و اسیدیتة خاک در رویشگاه چندل و مانگروهای همجوار وجود دارد.}, keywords_fa = {جاسک,سیریک,شاخص های محیط زیستی,گونه چندل,میناب}, url = {https://jfwp.ut.ac.ir/article_61609.html}, eprint = {https://jfwp.ut.ac.ir/article_61609_66d7ad6a281fe573e2d528b62daea07d.pdf} } @article { author = {Vahedi, َََAli and Mataji, Asad and Akhavan, Reza}, title = {Modeling the commercial volume of trees in mixed beech stands of Hyrcanian forests through artificial neural network}, journal = {Forest and Wood Products}, volume = {70}, number = {1}, pages = {49-60}, year = {2017}, publisher = {University of Tehran}, issn = {5052-2008}, eissn = {2383-0530}, doi = {10.22059/jfwp.2017.61621}, abstract = {Predicting the volume of standing trees precisely is the basis of growth rate, amount of allowable harvesting, aboveground biomass carbon sequestration, and the foundation of optimal management according to the sustainable development. New technology of artificial intelligence including artificial neural network (ANN) was applied for modelling and predicting the commercial volume of measured trees in district 3 of Glandroud forests. The data of renewed volume table was acquired from bureau of natural resources and watershed management of Mazandaran province, Nowshahr. Diameter and total height of 150 fallen trees were used as inputs to develop the stage-wise modeling by feed forward back-propagation (FFBP). Two non-linear functions, Logsig and Tansig, were applied as transfer functions. Each function with the same topology showed the different outputs having different accuracies. After initial weighting and training algorithm, transfer functions of neurons had different rotation for decreasing the errors. After each trial, which led to various topology functions, the result showed that the model including diameter and total height with transfer function of Logsig, topology of one hidden layer and fifteen neurons, was the best model to predict the volume of trees in this study. The mentioned model provided the considerable accuracy with the highest coefficient of determination (R2 = 0.99), the least mean squared error of test (MSE) and the least average deviation (AD = 0.158).}, keywords = {Artificial Neural Network,Carbon sequestration,Commercial volume,Mixed-beech stands,Neuron,Transfer function}, title_fa = {مدلسازی حجم تجاری درختان توده‌های آمیختۀ راش جنگل‌های هیرکانی با استفاده از شبکۀ عصبی مصنوعی}, abstract_fa = {پیش­بینی دقیق حجم درختان سرپا برحسب متر مکعب مبنای برآورد هر چه دقیق‌تر مقدار رویش، برداشت مجاز، ترسیب کربن زی‌تودۀ هوایی درختان و مدیریت بهینۀ جنگل براساس اصل توسعۀ پایدار محسوب می‌شود. از این‌رو، تحقیق حاضر با استفاده از شبکۀ عصبی مصنوعی در پی مدلسازی و پیش‌بینی حجم تجاری با حداکثر قطعیت است. پژوهش موردی جنگل سری 3 گلندرود نور بوده و اطلاعات دریافتی مستخرج از جدول‌های تجدید حجم ادارۀ کل منابع طبیعی نوشهر شامل قطر، ارتفاع کل و مقادیر حجمی مربوط به 150 اصله درختان قطع‌شده است. کلیۀ مقادیر حجمی به‌ازای کمیت‌های بیوفیزیکی مذکور به‌عنوان لایۀ ورودی به‌صورت مرحله‌ای با استفاده از شبکۀ عصبی پیش‌خور الگوریتم پس‌انتشار FFBP مدلسازی شدند. همچنین از دو تابع انتقال نورون غیرخطی Logsig و Tansig استفاده شد، طوری که هر مدل با توپولوژی مختلف شبکۀ مدنظر برای رسیدن به پاسخ هدف، دقت متفاوتی را نشان ‌داد. نورون‌های انتقالی برای رسیدن به حداقل خطای آزمون داده‌ها در هر الگوریتم آموزش، پس از وزن‌دهی اولیه دارای تعداد چرخش متفاوت بودند. نتایج مدلسازی پس از سعی و آزمون مکرر نشان داد که مدل حاوی قطر و ارتفاع کل با تابع انتقالی Logsig با معماری دو لایۀ پنهان و 15 نورون دارای حداقل میانگین مربعات خطای آزمون (‌MSE)، حداقل میانگین انحراف معیار و حداکثر ضریب تبیین (158/0= AD، 99/0= R2) است که از این‌رو به‌عنوان مدل بهینه معرفی می‌شود.}, keywords_fa = {تابع انتقال,ترسیب کربن,توده‌های آمیخته راش,حجم تجاری,شبکه عصبی مصنوعی,نورون}, url = {https://jfwp.ut.ac.ir/article_61621.html}, eprint = {https://jfwp.ut.ac.ir/article_61621_97ccea43190039345e93704e8f983f9c.pdf} } @article { author = {Kahneh, Ehsan and Lakzian, Amir and Astaraii, Alireza and Khavazi, Kazem}, title = {The effect of Frankia inoculation on growth, mineral nutrition, and N2-fixation of Alnus glutinosa}, journal = {Forest and Wood Products}, volume = {70}, number = {1}, pages = {61-70}, year = {2017}, publisher = {University of Tehran}, issn = {5052-2008}, eissn = {2383-0530}, doi = {10.22059/jfwp.2017.61620}, abstract = {Frankia symbiosis with Alnus glutinosa improves the growth and nutrition of the host plant. Therefore, the establishment of high N2-fixing activities, active nodule-forming populations of Frankia in soil is desirable. In this study, seedlings of A. glutinosa were inoculated with Frankia isolated from twenty-five root nodules of A. glutinosa in different sites of Guilan province, northern Iran. The seedlings were grown in pots filled with sterilized sand in a green-house. The seedling growth, N2-fixation and nodulation were measured 10 weeks after inoculation. The Inoculated seedling had higher dry weight of shoots, roots and nodules, and nutrients content compared to control. The N2-fixing activity varied from 0.017 to 0.337 mg N mg-1 nodules. The greatest N2-fixing capacity was observed in seedlings inoculated with AG6 Frankia crushed nodules compared with other treatments. There was a significant positive correlation coefficient between nodule dry weight, plant biomass and nutrients contents, that resulted of microbial inoculation effects. The results revealed that introduced Frankia could improve the growth and N2-fixation of A. glutinosa. Thus, selection true sources of inoculums that have a considerable influence to A. glutinosa and optimizing the sustainable production of these inoculums are needed. We concluded that AG6 had a superior effect on A. glutinosa seedlings and can be used for future studies. }, keywords = {Alnus glutinosa,Frankia,Root nodule,N2-fixation}, title_fa = {اثر تلقیح فرانکیا بر رشد، تغذیۀ معدنی و تثبیت نیتروژن در توسکای قشلاقی}, abstract_fa = {توسکای قشلاقی با اکتینومیست فرانکیا همزیست بوده و قادر به تثبیت زیستی نیتروژن و تأمین نیاز خود است؛ بنابراین شناسایی جدایه‌های کارامد فرانکیا با توانایی زیاد تثبیت نیتروژن، برای افزایش رشد و بهبود وضعیت تغذیه‌ای توسکای قشلاقی ضروری است. بدین منظور 25 گره ریشه‌ای فرانکیا از ریشۀ درختان توسکای قشلاقی در نقاط مختلف استان گیلان برداشت شد. سوسپانسیون گره‌ها در شرایط گلخانه‌ای به نهال‌های رشدکرده در شن استریل تلقیح شد. پس از ده هفته گیاهان برداشت ‌شده و خصوصیات رویشی، تغذیه‌ای و مقدار نیتروژن تثبیت‌شده در آنها اندازه‌گیری شد. نتایج نشان داد که بیشتر گره‌های ریشه‌ای سبب بهبود خصوصیات رویشی و تغذیه‌ای نهال‌ها نسبت به شاهد شده‌اند. مقدار نیتروژن تثبیت‌شده در نهال‌ها از 017/0 تا 337/0 میلی‌گرم نیتروژن در میلی‌گرم گره متغیر بود؛ بیشترین مقدار نیتروژن در نهال‌های تلقیح‌شده با تیمار Alnus glutinosa6 تثبیت‌شده است. همبستگی مثبت و معنی‌داری بین وزن گره، زیست‌تودۀ گیاه و غلظت عناصر غذایی گیاه وجود داشت که بیانگر اثر مثبت تلقیح میکروبی است. با توجه به نتایج می‌توان گفت که برای رشد بهتر و کمک به استقرار نهال‌های توسکا، تلقیح آنها با جدایه یا سویه‌های مناسب فرانکیا ضرورت دارد. بر این اساس تیمار AG6 اثر بهتری بر رشد گیاهان دارد و می‌توان برای تکثیر و مطالعات بعدی از آن استفاده کرد.}, keywords_fa = {توسکا قشلاقی,فرانکیا,گره ریشه‌ای,نیتروژن تثبیت شده}, url = {https://jfwp.ut.ac.ir/article_61620.html}, eprint = {https://jfwp.ut.ac.ir/article_61620_6006af29b36eb30943dd7fda92fe9320.pdf} } @article { author = {Mashayekhi, Zahra and Sharzehi, Gholam Ali and Danehkar, Afshin and Majed, Vahid}, title = {Estimating the local cost of conservation: a choice modeling approach for eliciting willingness to accept compensation}, journal = {Forest and Wood Products}, volume = {70}, number = {1}, pages = {71-81}, year = {2017}, publisher = {University of Tehran}, issn = {5052-2008}, eissn = {2383-0530}, doi = {10.22059/jfwp.2017.61624}, abstract = {This study aims to quantify the economic opportunity cost of conservation to coastal communities adjacent to mangrove forests in the southern coasts of Iran (Qeshm Island). The main commercial use of the Hara forests in this area is restricted to fishing, tourist boating trips, and limited leaves cutting. We applied a choice modeling (CM) approach to measure the value of a reduction of access under hypothetical scenarios in which local users would receive monetary compensation for lessening or forgoing mangrove forest utilization. Data were collected from the rural households living in the villages adjacent to mangrove forests and then analyzed by using conditional logit model. The results showed that the existence of a willingness to accept compensation for increases in environmental risk is associated with conservation program.  Local communities are willing to accept a lower compensation when the aim of protection is to lessen the Hara cutting and fishing amount relative to recreational opportunities banning. The estimated mean WTA was 235000 IRR/hsld/day. The results also showed that there is a heterogeneity in the individual’s preferences, which attributed to factors including income, age, family size, job and experience of participation in the environmental projects.}, keywords = {choice modeling,Willingness to accept,marginal value,Hara Forests,Direct Use Values}, title_fa = {برآورد هزینه‌های محلی حفاظت: استفاده از رویکرد مدلسازی انتخاب در استخراج تمایل به پذیرش}, abstract_fa = {هدف از این مطالعه، برآورد هزین فرصت اقتصادی حفاظت از جنگل‌های مانگرو واقع در جزیرة قشم برای جوامع محلی است. مهم‌ترین کارکردهای استفاده‌ای جنگل‌های مانگرو در این منطقه، امکان گردشگری، فعالیت‌های شیلاتی و سرشاخه‌چینی محدود است.رویکرد مدلسازی انتخاب برای برآورد هزینة کاهش بهره‌برداری از جنگل‌ها توسط مردم محلی تحت سناریوهای فرضی حفاظت استفاده شده است که بابت کاستن از بهره‌برداری‌هایشان، مبلغی برای جبران خسارت یا درآمد از‌دست‌رفته‌ به آنها پرداخت می‌شود. داده‌ها و اطلاعات لازم از خانوارهای ساکن در روستاهای بلافصل جنگل‌های مانگرو به‌دست آمد و با کاربرد مدل لاجیت شرطی تحلیل شد. نتایج نشان داد که افراد برای پذیرش ریسک محیط‌ زیستی ناشی از حفاظت، تمایل به دریافت غرامت دارند و امکان گردشگری در جنگل‌های مانگرو بیشترین ارزش نهایی (235000 ریال در روز) را از دید مردم محلی داراست. همچنین نتایج حاکی از ناهمگنی در ترجیحات افراد است که به متغیرهای درآمد، سن، اندازة خانوار، شغل و سابقة مشارکت در طرح‌های محیط ‌زیستی نسبت داده می‌شود. }, keywords_fa = {مدل‌سازی انتخاب,تمایل به پذیرش,ارزش نهایی,جنگل‌های حرا,ارزش‌های استفاده‌ای مستقیم}, url = {https://jfwp.ut.ac.ir/article_61624.html}, eprint = {https://jfwp.ut.ac.ir/article_61624_ee83721d557ad91176dbea2da6779a2b.pdf} } @article { author = {Hosseinzadeh, Jaafar and سردابی, حسین and زرین کاویانی, همایون}, title = {Comparison of the growth of industrial Eucalyptus species and cultivars in tropical region of Mehran}, journal = {Forest and Wood Products}, volume = {70}, number = {1}, pages = {83-91}, year = {2017}, publisher = {University of Tehran}, issn = {5052-2008}, eissn = {2383-0530}, doi = {10.22059/jfwp.2017.61614}, abstract = {Many species used in forestation could survive even in severe conditions, but considering the growth and economic efficiency is also important. Eucalyptus species are important sources for the production of wood, paper, fuel, and oils that are commonly used for planting the forests in the tropics. The purpose of this study was to evaluate the growth of adaptable species and cultivars, industrial and fast growing eucalyptus, for planting in inefficient lands of dry areas in Ilam province. For this purpose, the vegetative growth of eight species and varieties of eucalyptus including E. camaldulensis (from four origins), E. sargentii, E. microtheca, E. melliodora and E. saligna were investigated in a five-year period.in a randomized complete block design with three replicates in Mohsenab research station of Mehran, Ilam. The data analysis was performed using ANOVA and Duncan's multiple range tests in SAS software. The results indicated that there is a significant difference between species and cultivars in terms of indicators of height, trunk diameter, and canopy. E. camaldulensis is superior regarding to vegetative growth index in this study compared to other species. Three varieties of this species has an annual production of between two to five cubic meters per hectare, Shafarood variety has shown annual yield of more than 35 m per ha.}, keywords = {Eucalyptus,forest plantation,Growth,Mehran}, title_fa = {بررسی و مقایسۀ رشد برخی گونه‌ها و ارقام صنعتی اکالیپتوس در منطقۀ گرمسیری مهران}, abstract_fa = {بسیاری از گونه‌های مورد استفاده در جنگلکاری، حتی در شرایط سخت امکان ماندگاری و زنده‌مانی دارند، اما برای موفقیت در توسعۀ این موضوع، توجه به میزان رشد و بازده اقتصادی آنها اهمیت فراوانی دارد. گونه‌های مختلف اکالیپتوس منابع مهمی بـرای تولید چـوب، کاغذ، سوخت و اسانس هستند که به‌طور معمول در جنگلکاری مناطق گرمسیری استفاده می­شوند. این تحقیق با هدف بررسی رشد گونه‌ها و پروونانس­های سازگار، تندرشد و صنعتی اکالیپتوس، برای کاشت در اراضی کم‌بازده مناطق گرم و خشک ایلام انجام گرفته است. برای این­ منظور، وضعیت رشد رویشی 8 گونه و رقم اکالیپتوس شامل E. camaldulensis(از چهار مبدأ)، E. sargentii، E. microtheca،E. melliodoraوE. salignaدر قالب طرح بلوک­های کامل تصادفی با سه تکرار در ایستگاه تحقیقاتی محسن­آب مهران استان ایلام، در یک دورۀ پنج‌ساله بررسی شد. تجزیه‌و‌تحلیل اطلاعات با استفاده از روش تجزیۀ واریانس و آزمون چند‌دامنۀ دانکن با به‌کارگیری نرم‌افزار SAS انجام گرفت. نتایج حاکی از آن است که بین گونه‌ها و ارقام به لحاظ رشد شاخص­های ارتفاع، قطر تنه و قطر تاج اختلاف معنی­دار وجود دارد. گونۀ E. camaldulensis در این تحقیق نسبت به دیگر گونه‌ها از برتری رشد شاخص­های رویشی برخوردار است. سه رقم این گونه دارای تولید چوب سالانۀ بین 2 تا 5 متر مکعب در هکتار است و یک رقم آن (رقم شفارود) عملکرد سالانۀ بیش از 35 متر مکعب در هکتار دارد.}, keywords_fa = {اکالیپتوس,جنگل کاری,رویش,مهران}, url = {https://jfwp.ut.ac.ir/article_61614.html}, eprint = {https://jfwp.ut.ac.ir/article_61614_a71c2098e66d6dba152a92fe531262a5.pdf} } @article { author = {Ahadi, Zahra and Alavi, Jalil and Hoseini, Mohsen}, title = {Beech forest site productivity mapping using ordinary kriging and IDW (Case study: research forest of Tarbiat Modares University)}, journal = {Forest and Wood Products}, volume = {70}, number = {1}, pages = {93-102}, year = {2017}, publisher = {University of Tehran}, issn = {5052-2008}, eissn = {2383-0530}, doi = {10.22059/jfwp.2017.61615}, abstract = {Estimation and mapping of forest resources is a prerequisite for sustainable forest management. Site productivity is a key indicator of forest ecosystem services like wood production, carbon sequestration, etc. It allows foresters to forecast growth and production and hence select the most suitable tree species for a site. Due to the extent of Hyrcanian forests and mountainous areas in these forests that are sometimes difficult to access, it seems necessary to find suitable methods for mapping the quantitative parameters in these forests. In this study, site form index which is the most reliable criterion for evaluating the site productivity of mixed and uneven stands was used. This study aims at mapping beech forest site productivity by using ordinary kriging and inverse distance weighted in research forest of Tarbiat Modares University. For this purpose, 123 0.1 ha circular sample plots were laid out in beech dominated stands. The height and diameter of beechtrees with DBH ≥ 7.5 cm within each plot was recorded. The cross validation results showed that by using criteria such as mean error (OK=-0.036, IDW=-0.192), mean absolute error (OK=1.598, IDW=1.749), root mean square error (OK=2.053, IDW=2.223), relative mean error (OK=0.104, IDW=0.553) and relative root mean square error (OK=5.906, IDW=6.393), Kriging had significant advantage over IDW method and showed high estimation accuracy. Therefore, the methods can be applied to similar uneven-aged beech stands in the north of Iran.}, keywords = {Beech,IDW,interpolation,Kriging,Site Productivity}, title_fa = {تهیۀ نقشۀ توان تولید رویشگاه راش شرقی با استفاده از دو روش کریجینگ و معکوس فاصلۀ وزنی (پژوهش موردی: جنگل پژوهشی دانشگاه تربیت مدرس)}, abstract_fa = {تهیۀ نقشۀ متغیرهای کمّی جنگل، امری اجتناب‌ناپذیر در مدیریت و بهره‌برداری پایدار اکوسیستم جنگلی است. نقشۀ توان تولید جنگل، پتانسیل رویشگاه را در زمینۀ مواردی همانند تولید چوب، ترسیب کربن و غیره نشان می‌دهد و به‌طور معمول معرف شاخص توان تولید یک گونة خاص است. با توجه به گستردگی سطح جنگل‌های شمال کشور و کوهستانی بودن عرصه‌ها، امکان صرف زمان و هزینة زیاد و آماربرداری صددرصد برای تهیۀ نقشه‌های دقیق وجود ندارد. ازاین‌رو یافتن روش مناسب برای تهیۀ نقشۀ ویژگی‌های کمّی جنگل‌ها ضروری است. تحقیق حاضر در زمینۀ تهیۀ نقشۀ توان تولید رویشگاه راش با استفاده از دو روش کریجینــگ معمولی و معکوس فاصلة وزنی در جنگل دانشگاه تربیت مدرس انجام گرفته است. به‌منظور جمع‌آوری اطلاعات لازم، از 123 قطعه نمونۀ دایره‌ای با مساحت 1000 متر مربع در توده‌هایی که در آنها گونۀ راش غالب بود استفاده شد. نتایج بررسی حاضر نشان می‌دهد با توجه به معیارهای میانگین خطا (036/0-=OK، 192/0-=IDW)، میانگین قدرمطلق خطا (598/1=OK، 749/1=IDW)، مجذور میانگین مربعات خطا (053/2=OK، 223/2=IDW) و معیارهای نسبی میانگین خطا (104/0=OK، 553/0=IDW) و مجذور میانگین مربعات خطا (906/5=OK، 393/6=IDW)، روش کریجینگ عملکرد بهتری دارد. نتایج پژوهش حاضر نشان می‌دهد که روش زمین‌آماری کریجینگ قادر به تبیین تغییرهای مکانی توان تولید در منطقۀ تحقیق است و می‌تواند نقشۀ پهنه‌بندی آن را با صحت مناسب تولید کند.}, keywords_fa = {توان تولید,درون یابی,راش,کریجینگ,معکوس فاصله وزنی}, url = {https://jfwp.ut.ac.ir/article_61615.html}, eprint = {https://jfwp.ut.ac.ir/article_61615_1c046a3c8ba7255548ab01ffa609e40e.pdf} } @article { author = {solgi, somayeh and Salehi, Ali and Pourbabai, Hasan and Shabanpour, Mahmoud and Alavi, Seyed jalil}, title = {Estimation of soil moisture at field capacity and permanent wilting point based on some physical and chemical properties in forest soils}, journal = {Forest and Wood Products}, volume = {70}, number = {1}, pages = {103-110}, year = {2017}, publisher = {University of Tehran}, issn = {5052-2008}, eissn = {2383-0530}, doi = {10.22059/jfwp.2017.61610}, abstract = {Field capacity and permanent wilting point are used to calculate the amount of available water and generally the amount of water required by plants. Determination of these parameters usually takes much time and on the other hand there is not enough equipment for their analysis in all of the laboratories. Therefore, estimating of some soil physical and chemical properties can provide useful information to obtain the ability of hold moisture by soils. In this study, soil samples from area of Gysvm in Guilan province were taken and transferred to the laboratory and, particle size distribution, organic matter content, pH, particle density, bulk density, FC and PWP were measured. The correlation of FC and PWP with other soil properties was analyzed by using the univariate multiple regressions. The results showed that FC had significant and strong relationship with organic matter and the amount of sand (r=0.8, p < 0.01 and p <0.05). In addition, PWP showed significant relationship with silt and organic matter r=0.57, p < 0.05). In general, the results showed that for estimation of FC and PWP in this area or similar places, the other soil characteristics, which can be evaluated easier, can be used. }, keywords = {available water plant,soil moisture,regression methods,permanent wilting point}, title_fa = {برآورد رطوبت زراعی و رطوبت نقطۀ پژمردگی با استفاده از برخی خصوصیات فیزیکی و شیمیایی در خاک‌های جنگلی}, abstract_fa = {حد رطوبت زراعی (FC) و حد رطوبت نقطۀ پژمردگی (PWP) در محاسبة مقدار آب قابل دسترس و به‌طور کلی مقدار آب مورد نیاز گیاه استفاده می‌شوند. تعیین دقیق این حدود به‌طور معمول وقتگیر است و امکانات لازم بری این کار نیز در همة آزمایشگاه‌ها یافت نمی‌شود. بنابراین با تخمین این حدود از روی برخی ویژگی‌های فیزیکی و شیمیایی خاک، می‌توان اطلاعات مفیدی از توانایی نگهداری رطوبت خاک به‌دست آورد. در این پژوهش نمونه‌های خاک از منطقة گیسوم در استان گیلان تهیه شد و پس از انتقال به آزمایشگاه، توزیع اندازة ذرات، درصد مواد آلی، اسیدیته، جرم مخصوص ظاهری، جرم مخصوص حقیقی، رطوبت زراعی و رطوبت نقطۀ پژمردگی اندازه‌گیری شد. رابطة رطوبت زراعی و رطوبت نقطۀ پژمردگی با سایر خصوصیات خاک به کمک روش‌های رگرسیون یک‌متغیره و چند‌متغیره بررسی شد. نتایج نشان داد که رطوبت زراعی با درصد مادة آلی و درصد ماسة خاک رابطة قوی و معنی‌دار دارد (80/0=r و سطح معنی‌داری 1 و 5 درصد). همچنین رطوبت نقطۀ پژمردگی با درصد سیلت و درصد مادة آلی، رابطۀ معنادار داشت (57/0=r و سطح معنی‌داری 5 درصد). به‌طور کلی نتایج گویای آن است که برای برآورد رطوبت زراعی و رطوبت نقطۀ پژمردگی خاک این مناطق، می‌توان از سایر ویژگی‌های خاک که اندازه‌گیری آنها به‌نسبت ساده‌تر است استفاده کرد.}, keywords_fa = {آب قابل استفاده گیاه,رطوبت خاک,روش‌های رگرسیونی,نقطه پژمردگی}, url = {https://jfwp.ut.ac.ir/article_61610.html}, eprint = {https://jfwp.ut.ac.ir/article_61610_5d3ed605c8cc59ef0d7fd18545ac1ce0.pdf} } @article { author = {Akhavan, Reza and مومنی مقدم, تکتم and Akbarinia, M and Hoseini, Mohsen}, title = {Spatial patterns and intra-specific competition of Juniper tree in different life stages using O- ring statistic in Layen Forests, Iran}, journal = {Forest and Wood Products}, volume = {70}, number = {1}, pages = {111-125}, year = {2017}, publisher = {University of Tehran}, issn = {5052-2008}, eissn = {2383-0530}, doi = {10.22059/jfwp.2017.61622}, abstract = {Analyzing spatial patterns of individuals within life stages and spatial associations between different life stages is essential for understanding the spatial and temporal dynamics of populations. This research was conducted to study the spatial patterns and spatial association of Juniper trees (Juniperus polycarpos C. Koch) at different life stages in Juniper forests of Layen, Northeast of Iran. Data collection was done using four one- hectare square sample plots randomly selected, which fully mapped. Spatial patterns and spatial association of different life stages (juvenile, premature and mature; based on crown diameter) were then analyzed using O- ring univariate and bivariate statistics, respectively. Results showed that the general spatial patterns of the trees in total and in every life stage was clumped at least up to 25 m, while after that tends to random distribution at larger scales. Spatial association analyses revealed that there was no significant intra-specific competition among life stages namely, the spatial association was positive (attraction) or indifferent. It is concluded that clump patterns are due to heavy fruit and dispersal limitation of Juniper trees and harsh environmental condition of the study area. }, keywords = {Juniper tree,Layen forest,O- ring statistic,spatial patterns,spatial association}, title_fa = {بررسی الگوی پراکنش و رقابت درون‌گونه‌ای اُرس (Juniperus polycarpos C. Koch) در مراحل رویشی مختلف با استفاده از آمارۀ او-رینگ در جنگل‌های لاین استان خراسان رضوی}, abstract_fa = {بررسی الگوی مکانی افراد یک گونه در مراحل رویشی مختلف و نیز اثرهای متقابل آنها به‌منظور درک پویایی مکانی و زمانی جوامع ضروری است. این تحقیق با هدف تعیین الگوی مکانی گونۀ اُرس در مراحل رویشی مختلف و همچنین بررسی رقابت درون‌گونه‌ای بین مراحل رویشی مختلف در جنگل‌های اُرس منطقۀ حفاظت‌شدۀ هزارمسجد خراسان رضوی انجام گرفت. جمع‌آوری داده‌ها با استفاده از چهار قطعه نمونۀ یک هکتاری به ابعاد 100´100 متر که به‌صورت تصادفی انتخاب شدند، انجام گرفت. در داخل این قطعه‌ها، قطر تاج کلیۀ درختان اُرس اندازه‌گیری و مختصات مکانی آنها به‌روش فاصله- آزیموت تعیین شد. سپس این درختان براساس اندازۀ قطر تاج به سه طبقۀ نهال، جوان و بالغ تقسیم شدند. تجزیه‌وتحلیل داده‌ها با استفاده از حالت‌های تک‌متغیره و دومتغیرۀ آمارۀ او- رینگ به‌ترتیب به‌منظور بررسی الگوی مکانی و اجتماع‌پذیری پایه‌های اُرس انجام گرفت. نتایج نشان داد که الگوی کلی پراکنش پایه‌های اُرس در بیشتر موارد دست‌کم تا فاصلۀ 25 متری کپه‌ای است و پس از آن با بزرگ شدن مقیاس بررسی، به‌سمت الگوی تصادفی میل می‌کند. بررسی رقابت درون‌گونه‌ای و اثرهای متقابل بین مراحل رویشی مختلف اُرس نشان داد که رقابت معنی‌داری بین آنها وجود ندارد و در بیشتر موارد اثر متقابل از نوع جذب یا در نهایت خنثی است. سنگینی و محدودیت پراکنش میوۀ اُرس، نبود رقابت درون‌گونه‌ای و شرایط سخت محیطی رویشگاه از عوامل مؤثر در شکل دادن الگوی پراکنش اغلب کپه‌ای اُرس است. }, keywords_fa = {آماره او- رینگ,اثرات متقابل,اُرس,الگوی مکانی,جنگل‌های هزارمسجد خراسان}, url = {https://jfwp.ut.ac.ir/article_61622.html}, eprint = {https://jfwp.ut.ac.ir/article_61622_e40a70d7934e1ed8fc29cc95f5463e9c.pdf} } @article { author = {عباسی, هومن and پورمجیدیان, محمد رضا and حجتی, سید محمد and فلاح, اصغر}, title = {Physiological responses of Cupressus arizonica and Platycladus orientalis one-year-old seedlings in soil polluted with lead}, journal = {Forest and Wood Products}, volume = {70}, number = {1}, pages = {127-136}, year = {2017}, publisher = {University of Tehran}, issn = {5052-2008}, eissn = {2383-0530}, doi = {10.22059/jfwp.2017.61623}, abstract = {The use of woody plants for phytoremediation is so valuable but before that studying on their mechanism and resistance potential of different species is necessary. In the current research, we surveyed resistance potential of two conifer species such as Cupressus arizonica and Platycladus orientalis in response to lead contamination. In this regard, one-year old seedlings of both species were grown under different concentrations of lead such as 0, 100, 200, 300,400 and 500 lead milligram per soil kilogram during a growth season and the end of the experiment time some gas exchange, physiological and growth parameters were studied on the all treatments. Statistical analysis showed that photosynthesis and physiological parameters negatively and significantly were affected by the lead contamination but the weak of the plant metabolism didn’t led to seedling mortality. The negative effects of lead contamination on growth and seedling biomass of C. arizonica was less than P. orientalis that the result showed more resistance of the species. Finally it can be concluded that each species has different mechanism in response to lead contamination but C. arizonica is more resistant in compare to C. arizonica. Surely comprehensive research is necessary for make a final decision.}, keywords = {lead contamination,Growth,conifer,Photosynthesis,woody plant}, title_fa = {پاسخ‌های فیزیولوژیک نهال‌های یک‌ساله سرو نقره‌ای (Cupressus arizonica) و خمره‌ای (Platycladus orientalis) به خاک‌های آلوده به سرب}, abstract_fa = {استفاده از گونه‌های درختی در گیاه‌پالایی بسیار ارزشمند است، ولی لازمه آن کسب اطلاع از سازوکار فیزیولوژیک و پتانسیل گونه‌های مختلف است. بنابراین در این تحقیق توانایی گیاه پالایی دو گونه سوزنی‌برگ سرو نقره‌ای و خمره‌ای در مرحله نهال مورد ارزیابی قرار گرفت. در همین راستا نهال‌های یک‌ساله دو گونه مذکور در طول یک فصل رویش در خاک‌های آلوده به سرب با غلظت‌های 0، 100، 200، 300، 400 و 500 میلی‌گرم در کیلوگرم خاک قرار گرفت و شاخص‌های مختلفی از قبیل تبادلات گازی، پارامترهای فیزیولوژیک و رشد و تولید در دو گونه مورد بررسی قرار گرفت. تجزیه‌وتحلیل‌های آماری نشان داد که نرخ فتوسنتز و پارامترهای فیزیولوژیک دو گونه متأثر از اثرات منفی آلودگی سرب قرار گرفت، ولی این ضعف در متابولیسم گیاه سبب مرگ‌ومیر نهال‌های هیچ‌کدام از دو گونه نشد. میزان رشد و تولید زی‌توده در گونه سرو نقره‌ای کمتر دستخوش اثرات منفی قرار گرفت که نشان از مقاومت بیشتر این گونه دارد. درنهایت می‌توان اذعان داشت که دو گونه سرو نقره‌ای و خمره‌ای سازوکار متفاوتی نسبت به آلودگی سرب دارند، ولی توانایی و مقاومت گونه سرو نقره‌ای بیشتر است که بی-شک مطالعات جامع‌تر بویژه در غلظت‌های شدیدتر و دوره‌های طولانی‌تر برای تأیید نهایی این یافته لازم است.}, keywords_fa = {آلودگی سرب,رشد,سوزنی‌برگ,فتوسنتز,گونه‌های چوبی}, url = {https://jfwp.ut.ac.ir/article_61623.html}, eprint = {https://jfwp.ut.ac.ir/article_61623_4532d6bc6c669156cb1dff5c732e1805.pdf} } @article { author = {Babaie, Mehran and Hamzeh, Yahya and Jonoobi, Mehdi and Ashuri, AliReza}, title = {Characterization and fungal biodegradation of Bio-Nano-composite reinforced with unmodified and modified cellulose nanofibers}, journal = {Forest and Wood Products}, volume = {70}, number = {1}, pages = {137-145}, year = {2017}, publisher = {University of Tehran}, issn = {5052-2008}, eissn = {2383-0530}, doi = {10.22059/jfwp.2017.61618}, abstract = {The aim of this study was to evaluate the effect of chemical modification of cellulose nanofibers (CNF) on physical, mechanical and fungal biodegradation of plasticized starch (PS) bio-composites. Composites were produced using corn starch, glycerol / water as softener and 10% (based on dry weight of both) the original and modified cellulose nanofibers as reinforcement. Successful acetylation of cellulose nanofibers process was conducted using acetic anhydride and pyridine as the catalyst. Water absorption, water vapor permeability, mechanical, dynamic mechanical properties and furthermore, fungal biodegradation of composites were investigated. The results showed that addition of CNF and acetylated cellulose nanofibers (ACNF), resulted in improved mechanical properties of the PS composite and have a significant positive effect on its water absorption. Dynamic mechanical analysis (DMA) showed that the storage modulus significantly improved by addition of cellulose nanofibers. Weight loss measurement was used to evaluate the fungal biodegradation of the nano-composite under various conditions. Obtained results revealed that the effect of addition of both (CNF & ACNF) on the weight loss was significant and increased the bio-degradation period of plasticized starch composite, especially in PS/ACNF nano-composite.}, keywords = {Acetylation,biodegradation,cellulose nano fiber,plasticized starch,bio-composite}, title_fa = {بررسی خواص و تخریب قارچی چندسازة زیستی تقویت‌شده با نانو‌الیاف سلولزی اصلاح‌نشده و اصلاح‌شده}, abstract_fa = {هدف این پژوهش، بررسی اثر اصلاح شیمیایی نانوفیبرهای سلولزی بر ویژگی‌های فیزیکی، مکانیکی و تخریب قارچی چندسازة زیستی نشاستة نرم‌شده (TPS) بود. ازآنجا که این ویژگی‌ها در شرایط عملیاتی صنایع و مواد بسته‌بندی اهمیت دارند، ازاین‌رو چندسازة مورد نظر با استفاده از نشاستة ذرت، گلیسرول/آب به‌عنوان نرم‌کننده و نانوفیبر سلولزی اصلاح‌شده و نانوفیبرسلولزی اصلاح‌نشده (10 درصد وزنی) به‌عنوان تقویت‌کننده ساخته شد. اصلاح شیمیایی استیلاسیون نانوفیبرهای سلولزی با استفاده از انیدرید استیک و پیریدین به‌عنوان کاتالیزور با موفقیت صورت گرفت. جذب آب، نفوذپذیری به بخار آب و ویژگی‌های مکانیکی و دینامیکی مکانیکی چندسازه‌ها بررسی شد. به‌علاوه، تخریب زیستی قارچی در نانوچندسازه‌ها بررسی شد. نتایج نشان داد که نانوفیبرهای سلولزی اصلاح‌نشده و اصلاح‌شده در بهبود ویژگی‌های جذب آب و نفوذپذیری نسبت به بخار آب چندسازة نشاستة نرم‌شده مؤثر واقع شده‌اند. همچنین افزودن نانوفیبرهای سلولزی اصلاح‌نشده و اصلاح‌شده سبب بهبود ویژگی‌های مکانیکی چندسازه شد. آنالیز دینامیکی مکانیکی (DMA) نشان داد که مدول ذخیره به‌طور معنی‌داری بهبود پیدا کرده است. مطالعات تخریب قارچی هم نشان داد که افزودن نانوفیبرهای سلولزی به‌ویژه در نانوچندسازة نشاستة نرم‌شده/نانوفیبر سلولزی، سبب افزایش دوام و مدت زمان تخریب زیستی چندسازة نشاستة نرم‌شده می‌شود.}, keywords_fa = {استیلاسیون,تخریب زیستی,چندسازه زیستی,نانوفیبرسلولزی}, url = {https://jfwp.ut.ac.ir/article_61618.html}, eprint = {https://jfwp.ut.ac.ir/article_61618_8d2fc0b3e9c21104f778e3203efcbbd7.pdf} } @article { author = {Khosravani, Amir and mehranfar, amir hossein and Rahmaninia, Mehdi}, title = {The effect of cationic starch degree of substitution on nanoparticle system performance in old corrugated containers recycling}, journal = {Forest and Wood Products}, volume = {70}, number = {1}, pages = {147-155}, year = {2017}, publisher = {University of Tehran}, issn = {5052-2008}, eissn = {2383-0530}, doi = {10.22059/jfwp.2017.61616}, abstract = {Cationic starch has been widely used with various mineral nanoparticles such as nanosilica, in wet-end of papermaking. This study was aimed to study the effect of cationic starch with different degrees of substitution (DS: 0.018 and 0.045) in nanoparticle containing system with nanosilica, in recycled OCC pulp. In this respect, initially, to study the shape and dimensions of nanosilica sol particles, atomic force microscopy (AFM) and transmission electron microscopy (TEM) was used; thereby the average size of nanosilica sols were measured less than 50 nm. Moreover, in order to study the papermaking process parameters, the results revealed that high DS cationic starch (0.045) resulted more effective interactions with silica nanoparticles, so that, an increase in drainability of the furnish from 300 ml CSF for blank sample to about 560 ml CSF, was observed. In addition, as the internal bonding strength of paper can be a proper indicator of the starch performance, the effect of cationic starch DS was more prominent in the case of this strength index; such that, following application of high DS cationic starch, the internal bonding strength was raised more than twice as much. On the other hand, generally, although, due to electro-kinetics of cationic starch adsorption, reversing the charge of the whole paper-making system can be as a limiting factor for application of high DS cationic starch, but, in OCC recycling production lines, application of high DS cationic starch was much more effective.}, keywords = {degree of substitution,Drainability,retention,paper additives,nanosilica,Cationic starch}, title_fa = {تأثیر درجۀ جایگزینی نشاستۀ کاتیونی بر کارایی سیستم نانوذره در بازیافت کارتن‌های کنگره‌ای کهنه}, abstract_fa = {نشاستۀ کاتیونی به‌طور گسترده‌ای به‌همراه انواع نانوذرات معدنی مانند نانوسیلیکا در پایانۀ تر کاغذسازی کاربرد دارد. در این مطالعه تلاش شد تا اثر درجۀ جایگزینی‌های نشاستۀ کاتیونی (018/0 و 045/0) در سیستم نانوذرۀ حاوی نانوسیلیکا در خمیر بازیافتی حاصل از کارتن‌های کنگره‌ای کهنه بررسی شود. در ابتدا به‌منظور بررسی ویژگی‌های نانوذرات، شکل، اندازه و پراکنش ابعاد ذرات نانوسیلیکاسل مصرفی، با استفاده از میکروسکوپ نیروی اتمی و نیز میکروسکوپ الکترونی عبوری مطالعه شد که میانگین ابعاد نانوذرات کمتر از 50 نانومتر اندازه‌گیری شد. همچنین، در بررسی شاخص‌های فرایندی در تولید کاغذ، نتایج نشان از تعامل و اثرگذاری بیشتر نشاستۀ کاتیونی با درجۀ جایگزینی زیاد به‌همراه نانوذرات سیلیکا دارد، به‌نحوی که با استفاده از نشاستۀ ‌کاتیونی با درجۀ جایگزینی 045/0، قابلیت آبگیری از 300 میلی‌لیتر (CSF) در نمونۀ شاهد به حدود 560 میلی‌لیتر (CSF) افزایش یافت. به‌علاوه، با توجه به اینکه ویژگی پیوند درونی کاغذ، شاخص مناسبی از کارایی نشاسته است، اثر درجۀ جایگزینی نشاستۀ کاتیونی در این ویژگی مقاومتی مشهودتر بود. چنانکه با استفاده از نشاستۀ کاتیونی با درجۀ جایگزینی زیاد، مقاومت درونی کاغذ نسبت به شاهد به بیش از دوبرابر افزایش یافت. از سوی دیگر، هرچند به‌طور کلی در فرایند جذب نشاستۀ کاتیونی، به لحاظ الکتروسینتیکی، معکوس شدن بار عمومی سیستم کاغذسازی به‌عنوان یک عامل محدودکننده در استفاده از نشاستۀ کاتیونی با DS زیاد است، اما نتایج نشان داد در تولید کاغذ بازیافتی از کارتن‌های کنگره‌ای کهنه، استفاده از نشاستۀ کاتیونی با DS زیاد مؤثرتر بوده است. }, keywords_fa = {درجه جایگزینی,قابلیت آبگیری,ماندگاری,مواد افزودنی کاغذ,نانوسیلیکا,نشاسته کاتیونی}, url = {https://jfwp.ut.ac.ir/article_61616.html}, eprint = {https://jfwp.ut.ac.ir/article_61616_f6eeffcb4ad744fb73afec44b5b5e991.pdf} } @article { author = {Ghahramani, Saleh and Hedjazi, Sahab and Mahdani, Saeed}, title = {Development of poplar Kraft pulp strengths with cellulose nano fiber of rice straw}, journal = {Forest and Wood Products}, volume = {70}, number = {1}, pages = {157-165}, year = {2017}, publisher = {University of Tehran}, issn = {5052-2008}, eissn = {2383-0530}, doi = {10.22059/jfwp.2017.61617}, abstract = {This study was carried out to make cellulose nanofiber reinforced Kraft liner paper from rice straw. In this regard, P.deltoides clone 69-55 as a fast growth and high yield biomass species was selected for pulp production. Variable factors of Kraft pulping process including sulfidity, active alkali, temperature and time were applied in three levels and liquor to wood ratio of 4:1. Optimum conditions of Kraft cooking were found as 23% sulfidity, 18% active alkali, 170 °C, and 180 min. cooking temperature and time, respectively. The pulping yield and kappa number of control pulp were measured as 53.94% and 17.2, respectively. Then, the pulp was refined to achieve freeness degree of 333 ml.CSF. Nano-cellulose fiber of rice straw was added to improve the strength of control kraft pulp. The nanofibers at 5, 10 and 15% loadings were mixed with pulp suspension and 60 g/m2 handsheets were manufactured by means of a laboratory handsheet maker. It was found that all the strength characteristics of prepared papers were improved by addition of nanofibers in different levels. Tensile, burst, and tear indices increased up to 26.31%, 20.08%, and 10.07%, respectively by addition of 15% cellulose nanofibers to the control pulp suspension. Moreover, bending stiffness and RCT improved to 24.48%, and 52.38%, respectively. The overall results indicated that incorporation of cellulose nanofibers had a positive effect on kraft liner pulp produced from P.deltoides.}, keywords = {Kraft pulp,deltoeidos poplar,kraft liner,paper strength,cellulose nano fiber}, title_fa = {توسعۀ مقاومت‌های خمیرکاغذ کرافت صنوبر با نانوفیبر ‌سلولزی تهیه‌شده از ساقۀ برنج}, abstract_fa = {این تحقیق با هدف توسعۀ مقاومت‌های خمیرکاغذ کرافت­لاینر با نانوفیبر سلولزی تهیه‌شده از ساقۀ برنج انجام گرفت. در این تحقیق، چوب صنوبر دلتوئیدس (P. deltoides) رقم 55-69 به­عنوان گونه‌ای موفق، تندرشد و زودبازده برای تولید خمیرکاغذ انتخاب شد. عوامل متغیر پخت کرافت شامل سولفیدیته، قلیا، درجۀ حرارت و مدت زمان، هر کدام در سه سطح و نسبت مایع پخت به مادۀ چوبی 4 به 1 در نظر گرفته شد. پخت بهینه براساس عدد کاپای 2/17 و بازده 94/53 درصد خمیرکاغذ با شرایط زیر شامل سولفیدیتۀ 23 درصد، قلیای فعال 18 درصد، زمان 180 دقیقه و دمای 170 درجۀ سانتی­گراد انتخاب شد. سپس این خمیرکاغذ برای دستیابی به درجۀ روانی 333 میلی‌لیتر درجۀ کانادایی پالایش شد و از آن کاغذهای دست­ساز با جرم پایۀ 60 گرم بر سانتی­متر مربع ساخته شد. افزودن نانوفیبر با سوسپانسیون خمیرکاغذ در سه سطح 5، 10 و 15 درصد براساس وزن خشک خمیرکاغذ انجام گرفت و در مدت زمان 5 دقیقه هم‌زده شد، سپس از خمیرهای تیمارشده، کاغذهای دست­ساز با جرم پایۀ مذکور تهیه شد. نتایج نشان داد که همۀ مقاومت­های کاغذ کرافت با افزایش مصرف نانوفیبرسلولزی افزایش یافت. با افزودن 15 درصد نانوفیبر سلولزی به سوسپانسیون خمیرکاغذ، شاخص کشش 31/26 درصد، شاخص ترکیدن 08/20 درصد، شاخص پارگی 07/10 درصد، مقدار سفتی ­خمشی 48/24 درصد و مقاومت به لهیدگی حلقوی 38/52 درصد افزایش یافت. نتایج کلی، حاکی از تأثیر مثبت افزودن نانوفیبر سلولزی به خمیرکاغذ کرافت صنوبر دلتوئیدس، در بهبود مقاومت­های کاغذ کرافت­لاینر است.}, keywords_fa = {خمیرکاغذ کرافت,صنوبر دلتوئیدس,کرافت‌لاینر,مقاومت‌های کاغذ,نانوفیبر سلولزی}, url = {https://jfwp.ut.ac.ir/article_61617.html}, eprint = {https://jfwp.ut.ac.ir/article_61617_4a6342289907bf58f0115588f4b58fca.pdf} } @article { author = {Kazemi, Saeed and حبیبی, مسعودرضا and Ghasemi, Esmail}, title = {The effect of mixing method and nanoclay on physical, mechanical and morphological properties of wood plastic composite made from recycled low and high density polyethylene blends}, journal = {Forest and Wood Products}, volume = {70}, number = {1}, pages = {167-177}, year = {2017}, publisher = {University of Tehran}, issn = {5052-2008}, eissn = {2383-0530}, doi = {10.22059/jfwp.2017.61619}, abstract = {In this study, the effect of mixing method and nanoclay content on the physical, mechanical and morphological properties of wood plastic composite (WPC) were evaluated. Wood plastic composites were produced from recycled polyethylenes (low and high density) mixture, nanoclay and wood flour. The matrix and wood flour content were 60 wt% (LDPE 34% & HDPE 26%) and 40 wt%, respectively. Also, nanoclay was added in two levels 0 and 3 wt%. Simultaneous mixing and premixing method were used to manufacture the samples. The melt premixing samples exhibited superior physical and mechanical properties compared to the samples made by simultaneous mixing method. The composites containing nanoclay exhibited higher water absorption and lower strength properties. The results also indicated nanoclay agglomeration and poor distribution in the polymer matrix. Compared with the simultaneous mixing method, better distribution has been found for nanoclay particles in the samples made from the premixing method. }, keywords = {low density polyethylene,High density polyethylene,simultaneous mixing melt premixing,wood plastic composite}, title_fa = {تأثیر روش اختلاط و نانورس بر خواص فیزیکی، مکانیکی و ریخت‌شناسی چندسازۀ چوب پلاستیک حاصل از مخلوط پلی‌اتیلن سبک و سنگین بازیافتی}, abstract_fa = {در این پژوهش، تأثیر روش اختلاط و مقدار نانورس بر ویژگی‌های فیزیکی، مکانیکی و ریخت‌شناسی چندسازۀ چوب پلاستیک بررسی شد. چوب پلاستیک با استفاده از مخلوط پلی‌اتیلن‌های بازیافتی (پلی‌اتیلن سبک و سنگین)، نانورس و آرد چوب ساخته شد. مقدار ماتریس پلیمری 60 درصد (34 درصد پلی‌اتیلن سبک بازیافتی و 26 درصد پلی‌اتیلن سنگین بازیافتی) و مقدار مادۀ لیگنوسلولزی 40 درصد و مقدار نانورس در دو سطح وزنی 0 و 3 درصد (بر اساس وزن چندسازه) استفاده شد. برای ساخت نمونه‌ها از دو روش اختلاط همزمان و پیش‌اختلاط مذاب استفاده شد. نتایج نشان داد که ویژگی‌های فیزیکی و مکانیکی نمونه‌های ساخته‌شده به‌روش پیش‌اختلاط مذاب نسبت به نمونه‌های ساخته‌شده به‌روش اختلاط همزمان بهتر است. با افزایش درصد نانورس، خواص مقاومتی کاهش و جذب آب افزایش یافت. نتایج همچنین بیانگر کلوخه‌های نانورس و توزیع نامناسب آن در ماتریس پلیمری بود. در مقایسه با روش اختلاط همزمان، ذرات نانورس در نمونه‌های ساخته‌شده با روش پیش‌اختلاط مذاب، توزیع و پراکنش مناسب‌تری داشتند.}, keywords_fa = {پلی‌اتیلن سبک,پلی‌اتیلن سنگین,اختلاط همزمان,پیش اختلاط مذاب,چند سازه چوب پلاستیک}, url = {https://jfwp.ut.ac.ir/article_61619.html}, eprint = {https://jfwp.ut.ac.ir/article_61619_446c5cea0fa0111631ea3dba9cdb3f4b.pdf} } @article { author = {ناظریان, مرتضی and Akbari, Sajad and Kermanian, Hosein and Hashemi, Masoud}, title = {Modeling the Physical Properties of Particleboard from Canola (Brassica napus) Stalks by Using MLP, RBFN and ANFIS Artificial Neural Network}, journal = {Forest and Wood Products}, volume = {70}, number = {1}, pages = {179-188}, year = {2017}, publisher = {University of Tehran}, issn = {5052-2008}, eissn = {2383-0530}, doi = {10.22059/jfwp.2017.61611}, abstract = {Different factors influence on the properties of wood composite panels. Evaluating all of these factors not only increases waste of time and energy but also decreases accuracy in estimation of influence value of selected factors in manufacturing panels in order to obtain optimum point of different properties of wood composite panels. Hence, application of a new statistical method is necessary for determination of model estimating production´s optimum point. This study was aimed to evaluate the artificial neural networks performance to model the physical properties of the particleboard made of canola stalks particles. The physical properties of the particleboard were modeled and estimated using different weight ratios of melamine formaldehyde to urea formaldehyde, canola stalks to poplar particles and mat moisture content through MLP, RBFN and ANFIS artificial neural networks. The results showed that MLP neural network has better performance than RBFN and ANFIS neural networks to estimate the physical properties of the particleboard. The results also showed that the artificial intelligence models have a proper precision and ability to predict the particleboard's physical properties. The results of the sensitivity analysis also showed that for estimating  and , the most important parameter was mat moisture content with a positive effect on the modeling, and melamine formaldehyde to urea formaldehyde ratio was also the most effective parameter for estimating and .                 }, keywords = {Particleboard,Physical properties,Artificial Neural Network,MLP}, title_fa = {مدلسازی خصوصیات فیزیکی تخته خرده‌چوب ساخته‌شده از ساقۀ کلزا با استفاده از شبکه‌های عصبی مصنوعی:MLP، RBFN و ANFIS}, abstract_fa = {فاکتورهای مختلفی بر روی خواص اوراق مرکب چوبی تاثیر گذار هستند. بررسی تمامی این فاکتورها نتنها اتلاف وقت و انرژی را افزایش می­دهد، همچنین دقت در برآورد میزان تاثیر متغیرهای انتخاب شده در ساخت به منظور حصول نقطه بهینه از خواص مختلف فراورده­های مرکب چوبی را کاهش می دهد. از اینرو، لازم است تا از متدهای نوین آماری برای تعیین مدل برآورد کننده نقطه بهینه تولید استفاده نمود. هدف این تحقیق، ارزیابی عملکرد شبکه‌های عصبی مصنوعی در راستای مدلسازی خواص فیزیکی تخته خرده‌چوب ساخته‌شده از ساقۀ کلزا بود. مدلسازی و امکان تخمین خصوصیات فیزیکی تخته خرده‌چوب با استفاده از نسبت ملامین فرمالدئید به اوره فرمالدئید، نسبت ساقۀ کلزا به صنوبر و مقدار رطوبت کیک به روش‌های شبکه‌های عصبی مصنوعی: MLP، RBF  و ANFIS بررسی شد. نتایج نشان داد که شبکۀ عصبی MLP نسبت به شبکۀ RBFN و ANFIS عملکرد به‌نسبت بهتری در زمینۀ برآورد خصوصیات فیزیکی تخته خرده‌چوب دارد. همچنین نتایج نشان داد که مدل‌های هوش مصنوعی در زمینۀ پیش‌بینی خصوصیات فیزیکی تخته خرده‌چوب، دقت و توانایی مناسبی دارند. نتایج آنالیز حساسیت نیز نشان داد که در زمینۀ برآورد TS2 و WA24 مهم‌ترین پارامتر با تأثیر مثبت در روند مدلسازی، مقدار رطوبت کیک است و نسبت ملامین فرمالدئید به اوره فرمالدئید نیز در زمینۀ مدلسازی TS24 و WA2 مؤثرترین پارامتر است.}, keywords_fa = {تخته خرده‌چوب,خواص فیزیکی,شبکه‌های عصبی مصنوعی,پرسپترون چند لایه}, url = {https://jfwp.ut.ac.ir/article_61611.html}, eprint = {https://jfwp.ut.ac.ir/article_61611_5a5b0dfda723cb23cd9a86f42c193006.pdf} }