@article { author = {Moslehi, Maryam and Habashi, Hashem and Khormali, Farhad and Rahmani, Ramin}, title = {Effect of Season on Chemical Characteristics of Water in the Soil of Mixed Hyrcanian Beech Forest )Iran- Shastkolate Forest)}, journal = {Forest and Wood Products}, volume = {67}, number = {1}, pages = {1-11}, year = {2014}, publisher = {University of Tehran}, issn = {5052-2008}, eissn = {2383-0530}, doi = {10.22059/jfwp.2014.50432}, abstract = {Rainfall after passes through the biomass and necromass, penetrates into the soil and make large qualitative changes because of rhizospher, microorganisms, horizon thickness and organic matter. This process is the result of atmospheric, hydrological and biogeochemical reactions influenced by seasons. In this study we investigated seasonal variations of base cation leaching (Ca2+, Mg2+, Na+ and K+) in the soil of mixed Hyrcanian beech located in district one of Shastkolate forest, Golestan province. Shallow and deep soil leachate samples (0-10 and 10-50cm) were taken within a year (2008/12/21 to 2009/12/21). Amount of base-cations of shallow and deep soil leaching in different seasons were compared by the one way variance and Duncan test. Results showed the amount of Ca2+, Na+ and Mg2+ contents of shallow soil leaching in seasons are different significantly (P<0.05) so that the most leaching of Sodium and Magnesium were observed in winter. Sodium and Magnesiumin deep soil leaching were different significantly (P<0.05) so that the most leaching of them were observed in winter and spring respectively. With the recognition of chemical properties variations of shallow and deep soil leaching, we can suggest that exploitation programs perform in February to make optimized biogeochemical cycle and maximized base cation leaching.}, keywords = {Base cations,Beech,Leaching,seasonal variations}, title_fa = {تأثیر فصل بر ویژگی‎های شیمیایی آب در خاک جنگل راشستان آمیخته (ایران-جنگل شصت‎کلاته)}, abstract_fa = {آب باران پس از شست‏‏وشوی عناصر از روی زیست‎تودة روزمینی و بقایای گیاهی در جنگل، به خاک وارد می‎شود، و در خاک تحت تأثیر فضای ریشه‎ای درختان، میکروارگانیسم‎ها، ضخامت افق‎ها، و مادة آلی متحمل تغییرات وسیعی از لحاظ کیفیت می‎شود. فرایند مذکور نتیجة واکنش بسیار پیچیده‎ای از فرایند‎های اتمسفریک، هیدرولوژیک، و بیوژئوشیمیایی است که تحت تأثیر فصول قرار دارد. در این پژوهش، تغییرات فصلی آب‏شویی کاتیون‎های بازی (سدیم، پتاسیم، کلسیم، و منیزیم) در خاک تودة آمیختة راش‏ـ‏ممرزستان در سری یک طرح جنگل‌داری دکتر بهرام‎نیا (استان گلستان) بررسی شد. نمونه‎های حاصل از آب‏شویی افق سطحی و عمقی (0ـ10 و 10ـ50 سانتی‎متر) طی یک سال (1/10/87 تا 1/10/88) بعد از هر بارندگی جمع‎آوری شد. برای تعیین تغییرات کاتیون‎های بازی در فصول مختلف در آب‏شویی افق سطحی و عمقی، از روش آنالیز واریانس یک‏طرفه و آزمون دانکن استفاده شد. نتایج نشان داد در آب‏شویی افق سطحی‎ مقدار همة کاتیون‎ها، به‎جز پتاسیم در فصول مختلف، اختلاف معنی‎داری در سطح احتمال 5 درصد داشتند؛ به‎طوری‎ که در زمستان، بیشترین آب‏شویی کاتیون‎های سدیم و منیزیم مشاهده شد. همچنین در آب‏شویی افق عمقی، عناصر سدیم و منیزیم در فصول مختلف اختلاف معنی‎داری را در سطح 5 درصد نشان دادند؛ به‏طوری که بیشترین آب‏شویی سدیم در زمستان و منیزیم در بهار بود. با شناسایی میزان تغییرات ویژگی‎های شیمیایی آب‏شویی در خاک سطحی و عمقی برای بهره‎مندی حداکثر از آب‏شویی کاتیون‎ها، می‎توان گفت برنامه‎‎ریزی عملیات بهره‎برداری جنگل، بهتر است در ماه‎ اسفند باشد تا چرخة بیوژئوشیمیایی بهینه شود.}, keywords_fa = {آب‏شویی,تغییرات فصلی,کاتیون‎های بازی,گونة راش}, url = {https://jfwp.ut.ac.ir/article_50432.html}, eprint = {https://jfwp.ut.ac.ir/article_50432_f62866d75f093106e4c9e1ad4e5f155c.pdf} } @article { author = {Majnounian, Baris and Abdi, Ehsan and Foshat, Mahbuobe and Soofi Mariv, Hamid}, title = {Determining Biomechanical Properties of Poplar (Populus nigra) for Soil Bioengineering Purposes}, journal = {Forest and Wood Products}, volume = {67}, number = {1}, pages = {13-19}, year = {2014}, publisher = {University of Tehran}, issn = {5052-2008}, eissn = {2383-0530}, doi = {10.22059/jfwp.2014.50433}, abstract = {The aim of this work was to assess the characteristics of Poplar root system.Root Area Ratio (RAR) values were obtained using profile trenching method. First a starting point along the row of trees was randomly selected. Then a ten meters contiguous profile was dug along the row of trees and roots on both trenches (At a distance of 0.5 and 1.0 meter from the trunks) were measured.RAR values of roots were obtained at depth increments of 0.1 m. Also 30 root specimens were analyzed for tensile strength.The results indicated that RAR declined mostly in depth and distance from the stems. This decrease approximated a power function. In most cases the maximum RAR values are located within the first layers, with maximum rooting depth at about 1.0 m. The minimum and maximum RAR values along the profiles were 0.004% and 0.534% for nearer and 0.001% and 0.314% for farther trenches to stem respectively. The results of traction tests revealed that a positive power function existed between tensile force and root diameter. The mean root tensile strength and diameter were 19.92 ± 4.12 MPa and 1.51 ± 0.95 mm respectively. The root tensile strength values showed that root strength decreases with diameter following a power law equation. The data presented in this study expand the knowledge on most important biotechnical properties of Poplar growing in Iran.}, keywords = {biomechanics,poplar (Pupulus nigra),profile trench,root area ratio (RAR),Root tensile strength}, title_fa = {تعیین وی‍ژگی‏های زیست‏‏‏ مکانیک گونة تبریزی به‏ منظور استفاده در زیست‏ مهندسی خاک}, abstract_fa = {در دهه‏‏های اخیر کاربرد مصالح زنده در پروژه‏‏های عمرانی و حفاظتی به‌سرعت در حال گسترش بوده است. پیش‏‏نیاز استفاده از این روش‏ها آگاهی از ویژگی‏‏های مؤثر گیاهان به‌عنوان مصالح است. هدف از این پژوهش برآورد ویژگی‏های زیست‏‏مکانیک گونة تبریزی شامل تراکم، پراکنش، و مقاومت کششی بود. به این سبب، در منطقه‏ای مسطح، که دو ردیف صنوبر کاشته شده بود و پروفیلی به عمق یک متر بین آن دو حفر شده بود، نسبت سطح ریشه به سطح خاک (RAR) با استفاده از روش دیوارة پروفیل برداشت شد. با توجه به ردیفی‌بودن درختان، نقطه‏‏ای تصادفی در امتداد آن‌ها انتخاب و یک پروفیل پیوسته به طول 10 متر و موازی با ردیف درختان بررسی شد. کلیة ریشه‏ها در دیواره‏های پروفیل با فاصلة 5/0 (دیوارة نزدیک) و 0/1 متر (دیوارة دور) از تنة درختان در افق‏های 10 سانتی‏متری برداشت شد. سپس تعدادی نمونة ریشه به‏‏منظور تعیین ویژگی مکانیکی برای آزمایش مقاومت کششی انتخاب شد. نتایج نشان داد با افزایش عمق و نیز فاصله از درختان میزان RAR کاهش می‏‏یابد که این کاهش از تابع توانی پیروی می‏کند. اغلب، بیشترین مقادیر RAR در لایه‏‏های بالایی خاک قرار داشت و حداکثر عمق ریشه‌دوانی نیز حدود یک متر بود. نتایج آزمایش کششی رابطة توانی مثبت بین نیروی کششی و قطر ریشه و رابطة توانی منفی بین مقاومت کششی و قطر ریشه را نشان داد. نتایج این پژوهش مهم‌ترین ویژگی‏های زیست‏‏مکانیکی ریشة تبریزی را به‌صورت کمّی ‏‏نشان داد که می‏‏تواند در زیست‌مهندسی خاک کاربرد فراوانی داشته باشد.}, keywords_fa = {تبریزی,دیوارة پروفیل,زیست‏ مکانیکی,مقاومت کششی ریشه,نسبت سطح ریشه}, url = {https://jfwp.ut.ac.ir/article_50433.html}, eprint = {https://jfwp.ut.ac.ir/article_50433_70fc8735bd5431fceb10c651b427c895.pdf} } @article { author = {Shabanipoor, Mehrnoosh and Darvish Sefat, Ali Asghar and Rafieyan, Omid and Etemad, Vahid}, title = {Investigation on the Possibility of Tree Species Identification Using Digital Aerial Images by Object- based Classification}, journal = {Forest and Wood Products}, volume = {67}, number = {1}, pages = {21-32}, year = {2014}, publisher = {University of Tehran}, issn = {5052-2008}, eissn = {2383-0530}, doi = {10.22059/jfwp.2014.50434}, abstract = { Remotely sensed data, especially high spatial and radiometric resolution data can be useful to identify tree species. In this research, the capability of digital aerial images for this purpose was investigated by object-based classification method. About 5.8 ha of Taleghani park in Tehran, including species like platanus orientalis, Morus alba, Cupressus arisonica, Robinia pseudoacacia, Pinus eldarica, Ailanthus altissima, Cedrus atlantica, was studied. Four pan-sharpened multispectral images of UltraCam-D camera with the spatial and radiometric resolution, 0.07×0.07 m and 16 bit respectively, were analyzed. These data were geometrically corrected by aero-triangulation method using GCPs and IMU. The images classified using object-based method with the main and synthesic bands of Ratioing, PCA and HIS transformations. Firstly, segmentation was done with different parameters in order to avoid exceeding the maximum allowable number of objects. Finally, the classification was performed using appropriate features and layers by Nearest Neighbor method. In order to assess the accuracy of result, a ground truth map was produced based on field survey. This map has included 688 points, which each represents a tree on the ground. The result of accuracy assessment showed that overall accuracy and Kappa coefficient were 78% and 0.73 respectively. Platanus and Aillan showed the highest and the lowest Kappa 0.81700.2481, respectively. The result of this study showed that the UltraCam-D and object-based method have relatively good capability to recognize tree species. To reach a certainty about this result, it is essential to evaluate UltraCam-D data in other sites with different species.}, keywords = {identification tree species,object-based classification,segmentation,UltraCam-D,Urdan forest park}, title_fa = {بررسی امکان تشخیص گونه ‏های درختی در تصاویر هوایی رقومی به روش طبقه‏ بندی شی‏ء‏ـ‏ پایه}, abstract_fa = {داده‏های سنجش از دور، به‏ویژه تصاویر هوایی رقومی با توان تفکیک مکانی و رادیومتری زیاد، می‏تواند ابزار مناسبی برای شناسایی گونه‏های درختی باشد. هدف از این تحقیق بررسی قابلیت این تصاویر و روش شی‏ء‏ـ‏پایه برای تشخیص گونه‏های درختی است. به این منظور منطقه‏ای 86/5 هکتاری از پارک طالقانی تهران انتخاب شد. تصاویر دوربین UltraCam-D چهار‏باندی ادغام‏شده با باند پانکروماتیک با پیکسل‏هایی به ‏ابعاد 7×7 سانتی‏متر و عمق رادیومتری 12 بیت استفاده شدند. تصحیح هندسی تصاویر به کمک نقشۀ بزرگ‌مقیاس (1:2000) منطقه و داده‏های پروازی (IMU) به روش مثلث‏بندی هوایی انجام گرفت. باندهای اصلی به ‏همراه داده‏های تبدیلی NDVI، PCA، و HIS در فرایند قطعه‏بندی و طبقه‏بندی مورد آزمون قرار گرفتند. طبقه‏بندی به‌‏روش شی‏ء‏ـ‏پایه صورت گرفت. ابتدا یک قطعه‏بندی با شاخص‏های مختلف انجام گرفت و نتیجۀ آن به‏صورت کیفی ارزیابی شد. بعد از انتخاب توصیف‏گرهای مناسب برای تفکیک طبقات، طبقه‏بندی به روش نزدیک‏ترین همسایه با تعریف نمونه‏های تعلیمی برای هر طبقه اجرا شد. با بازدیدهای میدانی واقعیت زمینی نقطه‏ای تهیه شد. ارزیابی صحت نقشۀ حاصل از طبقه‏بندی با نقشة واقعیت زمینی نشان‏دهندة صحت کلی 78 درصد و ضریب کاپای 73/0 است. گونه‏های چنار و عرعر به‏ترتیب بیشترین (817/0) و کمترین (248/0) ضریب کاپای طبقه را کسب کردند. صحت کلی و ضریب کاپای خوب و برابری آن‏ها، بیانگر قابلیت خوب تصاویر مورد استفاده و روش شی‏ء‏ـ‏پایه در تشخیص اکثر گونه‏های درختی مورد مطالعه است. برای ارزیابی هر‏چه کامل‏تر قابلیت داده‏های UltraCam-D ضرورت دارد این داده‏ها در شرایط رویشگاهی مختلف و دیگر گونه‏ها استفاده شوند.}, keywords_fa = {پارک جنگلی شهری,تشخیص گونه‏ های درختی,طبقه‏ بندی شی‏ء‏ـ‏ پایه,قطعه ‏بندی,UltraCam-D}, url = {https://jfwp.ut.ac.ir/article_50434.html}, eprint = {https://jfwp.ut.ac.ir/article_50434_47f6e4eafabaf1154e5e218374309385.pdf} } @article { author = {Moghimian, Negar and Habashi, Hashem and Moslehi, Maryam}, title = {Pit and Mound Dynamics Related to Some Physical and Chemical Properties of Soil in a Mixed Beech Forest (Gorgan- Shastkholate Forest)}, journal = {Forest and Wood Products}, volume = {67}, number = {1}, pages = {33-45}, year = {2014}, publisher = {University of Tehran}, issn = {5052-2008}, eissn = {2383-0530}, doi = {10.22059/jfwp.2014.50435}, abstract = {One of the most important disturbance occurred in beech stand is tree uprooting that creates pit and mound microsite where caused serious change in soil physical and chemical properties. Pit and mounds have different ages in forest. So this research was carried out to investigate the relation of pit and mound dynamics with some physical and chemical properties of soil in a mixed beech forest in Shastkolate forest, Golestan Province. Soil samples were collected from 4 microsites: pit, mound, around the dead woods and closed canopy, in 4 different decay stages. Then soil Organic matter, bulk density and pH were compared in different age and 4 sections using one way ANOVA. Results showed that the amount of soil organic matter, bulk density and pH in 4 sections were significantly different (P<0.05). The most amounts of soil organic matter were found in pit while the most amounts of soil bulk density and pH were found in mound. Also the amount of soil organic matter and bulk density in different ages were significantly different among decay stages except for pH. The greatest amount of soil organic matter and bulk density were found respectively in 10-15 and less than 5 years. It can be concluded that soil organic matter increase while bulk density decreases when time following up and pit become older. However, older pit has richness and fertile soil because litter decomposition well done and microorganisms activities increases. Microsites created by the beginning of change, forest stand development and soil fertility.}, keywords = {age,Bulk density,organic matter,pH,uprooting,windthrow}, title_fa = {پویایی پیت و ماند در رابطه با برخی خصوصیات فیزیکی و شیمیایی خاک جنگل راشستان آمیخته (جنگل شصت‌کلاته‌ـ‌گرگان)}, abstract_fa = {از مهم‏ترین آشفتگی‏هایی که در راشستان‌ها مشاهده می‏شود ریشه‏کن‌شدن درختان و به دنبال آن ایجاد نواحی خرده‌رویشگاه پیت و ماند است که به تغییرات اساسی در خصوصیات فیزیکی و شیمیایی خاک منجر می‎شود. پیت و ماندها، با سنین مختلفی در جنگل‏ دیده می‏شوند. این پژوهش به‌‌منظور بررسی رابطة پویایی پیت و ماند با برخی خصوصیات فیزیکی و شیمیایی خاک در تودة آمیختة راش جنگل شصت‌کلاتة گلستان انجام شد. نمونه‏های خاک از 4 بخش پیت، ماند، حاشیة خشکه‏دار، و زیرتاج پوشش بسته در 4 درجة پوسیدگی جمع‎آوری شد و از نظر میزان مادة آلی، وزن مخصوص ظاهری، و pH خاک در 4 بخش‎ مذکور و سنین متفاوت، با استفاده از آزمون آنالیز واریانس یک‌طرفه مقایسه شدند. نتایج نشان داد میزان مادة آلی، وزن مخصوص ظاهری، و pH خاک در بخش‏های مختلف از اختلاف معنی‏داری در سطح 5 درصد برخوردار بودند. بیشترین مقدار مادة آلی به پیت، و وزن مخصوص ظاهری و pH به ماند اختصاص داشته است. میزان مادة آلی و وزن مخصوص ظاهری‌ در سنین متفاوت اختلاف معنی‎داری در سطح 5 درصد نشان داد. حال ‏آنکه در pH اختلاف معنی‌داری مشاهده نشد. بیشترین مقدار مادة آلی و وزن مخصوص ظاهری به‏ترتیب در سنین بالغ و جوان مشاهده شد. می‏توان گفت با گذشت زمان و افزایش سن پیت‏ مقدار مادة آلی افزایش، ولی میزان وزن مخصوص ظاهری کاهش می‏یابد که سبب حاصل‌خیزی خاک بر اثر تجزیة مناسب لاشبرگ در طی زمان و افزایش فعالیت میکروارگانیسم‏ها می‎شود. خرده‌رویشگاه‏های ایجاد‌شده سرآغاز تحول و حاصل‏خیزی خاک جنگل‌اند.}, keywords_fa = {باد‌افتادگی,سن,ریشه‏ کن‌شدن,مادة آلی,وزن مخصوص ظاهری,pH}, url = {https://jfwp.ut.ac.ir/article_50435.html}, eprint = {https://jfwp.ut.ac.ir/article_50435_3d6ee43260039b72584e8e2c6352ce8d.pdf} } @article { author = {Nikooy, Mehrdad and Naghdi, Ramin and Esmail Nezhad, Arezo}, title = {Production and Cost of Wood Extraction using Farm Tractor Case Study: Sheikhneshin Plantation Area in Shafaroud Watershed}, journal = {Forest and Wood Products}, volume = {67}, number = {1}, pages = {47-59}, year = {2014}, publisher = {University of Tehran}, issn = {5052-2008}, eissn = {2383-0530}, doi = {10.22059/jfwp.2014.50436}, abstract = {Farm tractors are a multipurpose machine in many applications, especially in agriculture and forest logging activity. Short log skidding with farm tractors is one of logging systems in plantation area in north of Iran as in many other areas in the word. In forest logging operation, equipped farm tractor with trailer can be used to skid short logs from stump area to landing. In this study, that has been carried out in Sheikhneshin plantation area of Shafaroud watershed, 69 skidding cycle studied and, after determination of skidding affective factors, the elemental time study method was applied to develop the skidding time predicting model. The efficiency and unit costs of logging were calculation in the operational and scheduled working time for farm tractor operators. Skidding time was most affected by number of log per turn, volume per turn and skidding distance. The logging productivity was 5.66 m3/PH or 5.34m3/SH with an average log number pre turn 59, an average volume per turn 3.81m3, and the average forwarding distance 202m. The cost of skidding using with and without delays was 88196 and 80354 Rials per cubic meter, respectively. Result of this study consistent with the result of research in progress should provide forest manager, planner and logger with detailed and accurate logging cost estimators allow for comparison and selection of equipment.}, keywords = {cost and production,forest plantation,skidding,Time Study}, title_fa = {مطالعة تولید و هزینة خروج چوب با تراکتور کشاورزی (مطالعة موردی: جنگل‏کاری‏ های منطقة شیخ ‏‏نشین شفارود)}, abstract_fa = {تراکتورهای کشاورزی ماشین‏های چندکاره‏ای هستند که کاربرد زیادی به‏خصوص در کشاورزی و بهره‏برداری جنگل دارند. حمل به روش چوب کوتاه با استفاده از تراکتور کشاورزیِ مجهز به یدک‏کش از روش‏های خروج چوب است که در جنگل‏کاری‏های شمال ایران مانند بسیاری از نقاط دیگر دنیا رایج است که طی آن گرده‏بینه‏های کوتاه از کنار کنده به محل دپو حمل می‏شوند. در این مطالعه، که در عرصه‏های جنگل‏کاری منطقة شیخ‏نشین حوزة آبخیز شفارود انجام شده است، 69 نوبت چوب‏کشی با تراکتور کشاورزی مطالعه و پس از تعیین عوامل تأثیرگذار بر زمان چوب‏کشی، مطالعة زمانی اجزای یک نوبت چوب‏کشی برای تعیین مدل پیش‏‏بینی زمان آن انجام و هزینة تولید بهره‏برداری در ساعات کار مفید و برنامه‏ریزی‏شده محاسبه شد. زمان چوب‏کشی تحت تأثیر تعداد گرده‏بینه، حجم بار، و فاصلة چوب‏کشی است. نتایج نهایی نشان داد متوسط تعداد بینه در هر نوبت چوب‏کشی 59 عدد، حجم بار 81/3 متر مکعب، و فاصلة چوب‏کشی 202 متر است و با این مقادیر میزان تولید ساعتی تراکتور کشاورزی در ساعات کار مفید 66/5 متر مکعب و در ساعت کار برنامه‏ریزی‏شده 34/5 متر مکعب و هزینة واحد تولید با و بدون احتساب زمان‏های تأخیر به‏ترتیب 88196 و 80354 ریال بود. نتایج این مطالعه، همگام با تحقیقات پیش رو، با برآورد دقیق و با جزئیات هزینه‏های بهره‏برداری به برنامه‏ریزان بهره‏برداری جنگل، مدیران جنگل، و بهره‏برداران اجازه می‏دهد تا با مقایسه، ماشین مناسب را انتخاب کنند.}, keywords_fa = {تولید و هزینه,جنگل‏کاری,چوب‏کشی,مطالعة زمانی}, url = {https://jfwp.ut.ac.ir/article_50436.html}, eprint = {https://jfwp.ut.ac.ir/article_50436_eaf9e37ec913190f1501349d10fb68d8.pdf} } @article { author = {Mirzaei, Mehrdad and Bonyad, Amir Eslam and Pourbabaei, Hassan}, title = {Investigation Comparison of Transect Sampling Methods in Estimation of Quantitative Characteristics of Forest (Case study: Daalaab forests of Ilam)}, journal = {Forest and Wood Products}, volume = {67}, number = {1}, pages = {61-72}, year = {2014}, publisher = {University of Tehran}, issn = {5052-2008}, eissn = {2383-0530}, doi = {10.22059/jfwp.2014.50437}, abstract = {Basic forest management and planning require appropriate quantitative and qualitative information. This information obtained from forest inventory. So forest inventory have an essential role in estimating present situation and future planning. In this study, 37.2 hectares of Daalaab forest of Ilam province were calculated with 1 hectare samples. To analyze quantitative characteristics, “transect with fixed length (50 m)” and “transect with fixed number of tree (5 trees)” were selected for comparison. Measured characteristics were density (number tree per hectare), crown cover and basal area. Based on systematic-random sampling pattern with 100 × 100m dimension, 37 samples were selected for each sampling method. In each sample, characteristics of trees were recorded and measured. Results this investigation showed that based on precision and cost criteria, transect with fixed number tree sampling method is a more suitable method for analysis of quantitative characteristics in the studied forests.}, keywords = {Ilam,Inventory,Quercus persica,transect method,Zagros forests}, title_fa = {بررسی مقایسه ‏ای روش‏های خط نمونه در برآورد مشخصه ‏های کمّی جنگل (مطالعة موردی: جنگل‏های دالاب ایلام)}, abstract_fa = {مدیریت جنگل و برنامه‏ریزی اصولی برای آن مستلزم داشتن اطلاعات کمّی و کیفیِ مناسب است. این اطلاعات از طریق آماربرداری از جنگل به‌دست می‌آید. از این رو، آماربرداری جنگل در برآورد وضعیت موجود و برنامه‏‏ریزی آینده نقش اساسی دارد. در این بررسی 2/37 هکتار از جنگل‏های دالاب ایلام به‌صورت صددرصد با قطعات نمونۀ 1 هکتاری آماربرداری شد. برای برآورد مشخصه‏های کمّی، دو روش خط‏ نمونه با طول ثابت 50 متر و خط ‏نمونه با تعداد ثابت 5 درخت، مقایسه شدند. مشخصه‏های اندازه‏گیری‌شده شامل تعداد درختان در هکتار، سطح مقطع برابر‌سینه، و درصد تاج‌‏پوشش بود. برای هر روش تعداد 37 قطعه‌نمونه براساس الگوی منظم تصادفی با ابعاد شبکۀ 100×100 متر برداشت و مشخصات مورد نیاز درختان اندازه‏گیری شد. نتایج این بررسی نشان داد که با در‌نظر‌گرفتن دقت و هزینه، روش خط نمونه با تعداد درخت ثابت، روش مناسب برای برآورد مشخصه‏های کمّی جنگل‏های منطقۀ دالاب استان ایلام است.}, keywords_fa = {آماربرداری,ایلام,بلوط ایرانی,جنگل‏های زاگرس,روش خط نمونه}, url = {https://jfwp.ut.ac.ir/article_50437.html}, eprint = {https://jfwp.ut.ac.ir/article_50437_2ef5c36842528675eb994c71e0e7da7b.pdf} } @article { author = {Noshadi, Hasan and Namiranian, Manochehr and Attarod, Pedram and Hoseinzadeh, Jafar}, title = {Effect of Physiographic Factors on Mortality of Persian Oak in the Middle of Forests (Case study: Ilam)}, journal = {Forest and Wood Products}, volume = {67}, number = {1}, pages = {73-84}, year = {2014}, publisher = {University of Tehran}, issn = {5052-2008}, eissn = {2383-0530}, doi = {10.22059/jfwp.2014.50438}, abstract = {This study aimed to determine the effect of physiographic factors (slope, aspect and altitude) on quantitative characteristics of Persian Oak (Quercus brantii Lindl) in forests of midlle Zagros. In this study in forests of the Abdanan city if Ilam province and regional functions area were approximately 150 ha, 134 sample plots of rectangular shape with dimensions 40 * 50 m to the systematic – random method in a network with dimensions 100 * 100 m using and species characteristics, dbh, crown diameter, heigh of trees and physiographic sample plot (slope, aspect and altitude) were recorded. Results showed that the effect of physiographic factors on dbh of trees was not significant. The aspect and altitude on the characteristics size canopy of tree, basal area per ha and number of ha has a significant impact. Among the physiographic factors aspect have a significant impact on trees height. This study can conserved areas that Oak species with quantitative characteristics better and special attention to areas that are being destroyed, to be effective.}, keywords = {Persian Oak,midlle Zagros,Physiographic factors,quantitative characteristics}, title_fa = {تأثیر عوامل فیزیوگرافی بر مشخصه‌های کمّی بلوط ایرانی در جنگل‌های زاگرس میانی (مطالعة موردی: ایلام)}, abstract_fa = {این مطالعه با هدف تعیین اثر عوامل فیزیوگرافی (شیب، جهت، و ارتفاع از سطح دریا) بر مشخصه‌های کمّی بلوط ایرانی در جنگل‌های زاگرس میانی صورت گرفته است. دراین تحقیق که در جنگل‌های شهرستان آبدانان، از توابع استان ایلام، و در منطقه‌ای به وسعت تقریبی 150 هکتار انجام شد، 134 قطعه‌نمونۀ مستطیل‌شکل به ابعاد 50×40 متر به روش آماربرداری منظم‌ـ‌تصادفی در شبکه‏ای به ابعاد 100×100 متر تعیین و مشخصه‏های گونه، قطر برابرسینه، قطر تاج، ارتفاع درختان، و نیز فیزیوگرافی قطعه‌نمونه (شیب، جهت دامنه، و ارتفاع از سطح دریا) برداشت شد. نتایج نشان داد که عوامل فیزیوگرافی بر قطر برابرسینۀ درختان تأثیر معنی‌داری ندارد. جهت دامنه و ارتفاع از سطح دریا بر اندازۀ مشخصه‌های سطح تاج درختان، سطح مقطع برابرسینه، و تعداد در هکتار تأثیر معنی‌داری دارد. در بین عوامل فیزیوگرافی، جهت دامنه بر ارتفاع درختان تأثیر معنی‌داری داشته است. این تحقیق، در حفظ مناطقی که دارای گونه‌های بلوط با مشخصه‌های کمّی بهتر یا مناطقی که در حال تخریب هستند، مؤثر خواهد بود.}, keywords_fa = {بلوط ایرانی,زاگرس ‏میانی,عوامل فیزیوگرافی,مشخصه‌های کمّی}, url = {https://jfwp.ut.ac.ir/article_50438.html}, eprint = {https://jfwp.ut.ac.ir/article_50438_ce6479e89159f08efa07590da976e6e4.pdf} } @article { author = {Ramzanpour, Milad and Tarmian, Asghar and Taghiyari, Hamid Reza}, title = {Effect of Fir Wood Steaming on Absorption and Penetration of Acid Copper Chromate Preservative}, journal = {Forest and Wood Products}, volume = {67}, number = {1}, pages = {85-92}, year = {2014}, publisher = {University of Tehran}, issn = {5052-2008}, eissn = {2383-0530}, doi = {10.22059/jfwp.2014.50439}, abstract = {In this research, effects of pre-steaming of fir wood (Abies alba) on the ACC preservative absorption, retention, and depth of penetration were investigated. Pre-steaming was carried out at 120, 140, and 160°C for one hour under 2 to 3 bars pressure. Steaming was carried out for bastard sawn boards with green dimensions of 250 × 100 × 50 millimeter and average initial moisture content of 30%. After moisture conditioning of wood samples, they were impregnated with ACC preservative solution with 5% concentration using low pressure process. Then, the impregnation properties were measured. The image J software was also used to determine the wood cross section impregnation. Results showed that pre-steaming at 140 and 160°C significantly increased the absorption, retention, and depth of preservative penetration; however, no significant difference was observed between the control specimens with those pre-steamed at 120°C. Furthermore, the results showed that the wood impregnation properties, including absorption and depth of penetration improved by increasing steaming temperature from 120 to 1600 C.}, keywords = {absorption,acid copper chromate,depth of penetration,Fir wood,steaming}, title_fa = {تأثیر بخارزنی چوب نراد بر میزان جذب و عمق نفوذ مادة حفاظتی اسید کرومات مس}, abstract_fa = {در این تحقیق، تأثیر پیش‌تیمار بخارزنی چوب نراد بر میزان جذب، ماندگاری، و عمق نفوذ مادة حفاظتی ACC بررسی شد. پیش‌تیمارهای بخارزنی در دماهای 120، 140، و 160 درجة سانتی‌گراد به مدت 1 ساعت و تحت فشار 2 تا 3 اتمسفر انجام گرفت. عملیات بخارزنی بر روی تخته‌‌هایی به ابعاد 50×100×250 میلی‌‌متر با الگوی برش بینابینی و با میانگین رطوبت اولیة 30 درصد انجام شد. پس از متعادل‌سازی رطوبت نمونه‌ها، عملیات اشباع با استفاده از محلول حفاظتی ACC با غلظت 5 درصد تحت فرایند کم‌فشار انجام شد. همچنین، با استفاده از نرم‌افزار Image j درصد اشباع سطح مقطع نمونه‌‌ها با مادة حفاظتی محاسبه شد. نتایج نشان دادند که پیش‌تیمار بخارزنی چوب نراد در دماهای 140 و 160 درجة سانتی‌‌گراد موجب افزایش میزان جذب، عمق نفوذ، و سطح اشباع مادة حفاظتی می‏شود، ولی تفاوت معنی‌‌داری بین نمونه‏های شاهد و نمونه‌‌های بخاردیده در دمای 120 درجة سانتی‌گراد مشاهده نشد. نتایج همچنین نشان داد که با افزایش دمای بخارزنی از 140 به 160 درجة سانتی‌گراد به‌طور معنی‌داری بر میزان جذب و عمق نفوذ مادة حفاظتی افزوده می‏شود.}, keywords_fa = {اسید کرومات مس,بخارزنی,جذب,چوب نراد,عمق نفوذ}, url = {https://jfwp.ut.ac.ir/article_50439.html}, eprint = {https://jfwp.ut.ac.ir/article_50439_35c32a7aa1ffa662c91815c79e8e97d4.pdf} } @article { author = {Hojati Marvast, Ebrahim and Abdulkhani, Ali and Karimi, Ali Naghi and Hamzeh, Yahya}, title = {Study on Dissolution and Regeneration of Cellulose with Two Types of Ionic Liquids}, journal = {Forest and Wood Products}, volume = {67}, number = {1}, pages = {93-103}, year = {2014}, publisher = {University of Tehran}, issn = {5052-2008}, eissn = {2383-0530}, doi = {10.22059/jfwp.2014.50440}, abstract = {Cellulose, which is the most abundant natural polymer on the earth, has wide variety of applications due to unique physical and mechanical properties. The native crystalline structure of cellulose (cellulose I) is considered to be one of the major factors limiting its potential in terms of cost-competitive variety production. Here the effect of ionic liquid treatment on the cellulose crystalline structure was studied. Two imidazole-based ionic liquids, 1- butyl -3 - methyl -1 - Imidazolium chloride (BMIMCl) and 1, 3 - methyl imidazolium dimethyl sulfate ([BMIM] [MeSO4]), were used to dissolve cellulose. The overall evaluation indicates the inability of ([BMIM] [MeSO4]) in dissolution of cellulose whereas BMIMCl was capable in cellulose dissolution. This was also confirmed by 13CNMR spectrum. Original cellulose crystalline structure was deformed to Cellulose II and the crystallinity rate was decreased during dissolution and regeneration. Also, crystallinity percent, nano crystal thickness and hydrogen bond energy were decreased after dissolution. Moreover, results showed that the crystallinity and crystal thickness were increased through gradual cooling method regeneration compared to immediate cooling method.}, keywords = {Cellulose,Crystallinity,dissolution,hydrogen bond energy,Ionic liquid,Regeneration}, title_fa = {بررسی انحلال و بازسازی سلولز در دو نوع حلال یونی}, abstract_fa = {سلولز فراوان‏ترین پلیمر طبیعی روی کرۀ زمین است که به‌علت خواص فیزیکی و مکانیکیِ منحصربه‌فرد خود کاربردهای متنوعی یافته است. ساختار سلولز طبیعی (سلولز I) از عوامل مهم محدود‌کنندة پتانسیل آن در ارزش رقابتی در تولید فرآورده‏های مختلف است. در این مطالعه، از دو حلال یونی ایمیدازول پایة 1ـ‌‌بوتیل‌ـ3ـ‌متیل ‌ایمیدازولیوم کلرید (BMIMCl) و 1ـ‌بوتیل‌ـ3ـ‌متیل ایمیدازولیوم متیل سولفات ([BMIM][MeSO4]) برای انحلال سلولز استفاده شد. بررسی‌ها نشان داد که حلال [BMIM][MeSO4] قادر به ‌‌انحلال سلولز نیست و عمل‌‌آوری با حلال سبب تشکیل ترکیبات تخریبی محلول در آب گردید، اما عمل‌‌آوری با BMIMCl سبب انحلال سلولز شد. طیف‌سنجی 13CNMRنیز این واقعیت را تأیید کرد. ساختار بلوری سلولز بر اثر انحلال و بازسازی به ‌‌سلولز II تغییر شکل می‌یابد و مقدار بلورینگی ساختار آن کاهش می‌یابد. درصد کریستالی، ضخامت نانوکریستال‏ها، نرخ کریستالی، و انرژی پیوند نیز بر اثر انحلال و باز‌‌سازی سلولز کاهش یافتند. نتایج نشان داد که درصد کریستالی و ضخامت نانوکریستال‏ها بر اثر بازسازی سلولز با ‌‌روش سرد‌کردن تدریجی در مقایسه با ‌‌روش سرد‌کردن ناگهانی افزایش می‌یابد.}, keywords_fa = {انحلال,انرژی پیوند هیدروژنی,بازسازی,بلورینگی,حلال یونی,سلولز}, url = {https://jfwp.ut.ac.ir/article_50440.html}, eprint = {https://jfwp.ut.ac.ir/article_50440_9599d43b602c40dd695f333ef705f602.pdf} } @article { author = {Hasanjanzadeh, Hadi and Hedjazi, Sahab and Yousefi, Hossein and Mahdavi, Saied and Abdolkhani, ِِAli}, title = {The Effect of Using Cellulose Nanofibers and Cationic Starch on the Properties of Soda-AQ Pulp from Rice Straw}, journal = {Forest and Wood Products}, volume = {67}, number = {1}, pages = {105-117}, year = {2014}, publisher = {University of Tehran}, issn = {5052-2008}, eissn = {2383-0530}, doi = {10.22059/jfwp.2014.50441}, abstract = {In this study, the effect of using cellulose nanofibers and cationic starch on the mechanical properties of soda anthraquinone (Soda-AQ) pulp prepared from un-extracted/ alkaline pre-extracted rice straw using conventional hand sheet paper making system with standard wire was investigated. Cellulose nanofibers were added at three ratios of 2, 5 and 10 wt%, mixed with pulps from un-extracted/ alkaline pre-extracted rice straw over 2, 5 and 10 minutes. The consumption ratio of cationic starch was also tuned at 1.5 percent based on dry weight of pulp. The results show that in spite of using conventional hand sheet paper making system, the mechanical strength of paper containing cellulose nanofibers linearly increased. The use of cationic starch had a positive significant effect on the paper properties due to better retention of cellulose nanofibers. The results indicate the success of using cellulose nanofibers with cationic starch in improving the mechanical characteristics of soda-AQ pulp in conventional hand sheet paper making system.}, keywords = {alkaline pre-extraction,soda-AQ pulp,rice straw,Cationic starch,Cellulose Nanofiber,mechanical properties}, title_fa = {تأثیر استفاده از نانوالیاف سلولزی و نشاستة کاتیونی بر ویژگی‏‏ های خمیرکاغذ سودا آنتراکینون ساقة برنج}, abstract_fa = {در این تحقیق، تأثیر استفاده از نانوالیاف سلولزی و نشاستة کاتیونی بر بهبود ویژگی‏‏های مقاومتی خمیرکاغذ سودا آنتراکینونِ تهیه‏‏شده از ساقة برنجِ پیش‏‏استخراج‏‏‏نشده و پیش‏‏استخراج‏‏‏شده با قلیا، در سیستم متداول تهیۀ کاغذ دست‏‏ساز، بررسی شد. نانوالیاف سلولزی در سه سطح 2، 5، و 10 درصد و در سه سطح زمان اختلاط 2، 5، و 10 دقیقه به سوسپانسیون خمیرکاغذ حاصل از ساقة برنج پیش‏‏استخراج‏نشده و پیش‏‏استخراج‏شده اضافه شدند. میزان مصرف نشاستة کاتیونی ثابت و برابر 5/1 درصد در نظر گرفته شد. نتایج این تحقیق نشان داد که مقاومت‏های مکانیکی خمیرکاغذ با افزودن نانوالیاف سلولزی به‏رغم استفاده از ورق‏سازی متداول آزمایشگاهی در سه سطح (2، 5، و 10 درصد) به طور خطی افزایش می‏یابد. با افزودن نانوالیاف سلولزی بعد از کاتیونی‏کردن خمیرکاغذ با نشاستة کاتیونی، با توجه به افزایش نگه‏داری نانوالیاف سلولزی، مقاومت‏ها به‏‏طور معنی‏‏داری افزایش یافت. نتایج حاکی از آن است که به‏‏کارگیری سیستم نانوالیاف سلولزی به همراه نشاستة کاتیونی در ارتقای ویژگی‏‏های مقاومتی خمیرکاغذ سودا آنتراکینون در سیستم متداول تهیۀ کاغذ دست‏‏ساز مؤثر و موفق بوده است.}, keywords_fa = {پیش‏‏استخراج قلیایی,خمیرکاغذ سودا آنتراکینون,ساقة برنج,نشاستة کاتیونی,نانوالیاف سلولزی,ویژگی‏های مکانیکی خمیر‏کاغذ}, url = {https://jfwp.ut.ac.ir/article_50441.html}, eprint = {https://jfwp.ut.ac.ir/article_50441_f401b1e195eb04c0117a2998b492d6cd.pdf} } @article { author = {Mehdipour Roshan, Valiollah and Eshraghniya Jahromi, Abdolhamid}, title = {Review and Effect of Pulp Consistency Output of the Twin Roll Press with Effluent Pollution by Mathematical Model}, journal = {Forest and Wood Products}, volume = {67}, number = {1}, pages = {119-131}, year = {2014}, publisher = {University of Tehran}, issn = {5052-2008}, eissn = {2383-0530}, doi = {10.22059/jfwp.2014.50442}, abstract = {In paper industry, Twin roll press machines are utilized for recovering the dissolved materials resulting from the process of transforming wood into pulp and it's efficiency has a considerable role in wasting resources and effluent pollution load. This research was performed for the purpose of showing the effective pulp consistency on efficiency of washing by using a mathematical model based on the pattern of simulating the System Engineering Analysis. The press function was analyzed according to the same principle. Based on the data of Mazandaran Wood and Paper Industries, the results show that in a fixed amount of production the washing efficiency of the twin roll press has a direct impact on the pulp consistency coming out of the related press.The consistency rise of about 10% of output pulp, increases 10% washing efficiency and reduces about 35% of not recovered dissolved materials, this represents a decrease in effluent pollution load.}, keywords = {Twin Roll Press,washing efficiency,pulp consistency,effluent pollution load,Mathematical model}, title_fa = {بررسی اثر درصد خشکی خمیر خروجی از پرس دوقلو بر آلودگی پساب با استفاده از مدل ریاضی}, abstract_fa = {در صنعت کاغذسازی، برای بازیافت مواد محلول حاصل از فرایند تبدیل چوب به خمیر‌کاغذ، از پرس استفاده می‌شود که کارایی آن نقش بسزایی در جلوگیری از هدر‌رفت منابع و آلودگی پساب دارد. این تحقیق برای نشان‌دادن اثر درصد خشکی خمیر خروجی از پرس دو‌‌قلو بر کارایی شست‌وشو با استفاده از مدل ریاضی و بر‌مبنای الگوی شبیه‌سازی آنالیز مهندسی سیستم، صورت گرفته و بر‌اساس آن عملکرد پرس بررسی شده است. نتایج تحقیق نشان داد که در یک مقدار تولید ثابت برمبنای اطلاعات شرکت چوب و کاغذ مازندران، کارایی شست‌وشوی پرس دوقلو رابطة مستقیم با درصد خشکی خمیر خروجی از پرس دارد؛ به‌‌طوری ‌که افزایش حدود 10 درصد خشکی خمیر خروجی باعث افزایش 10 درصد کارایی شست‌وشو و هم‌زمان باعث کاهش حدود 35 درصد مواد بازیافت‌‌نشده می‌شود که این موضوع نشان‌‌دهندة کاهش بار آلودگی پساب است.}, keywords_fa = {آلودگی پساب,پرس دو‌قلو,درصد خشکی خمیر,کارایی شست‌وشو,مدل ریاضی}, url = {https://jfwp.ut.ac.ir/article_50442.html}, eprint = {https://jfwp.ut.ac.ir/article_50442_eee56dead223b50b72099a8ba458ae9a.pdf} } @article { author = {Akbarpour, Iman and Resalati, Hossein}, title = {The Effect of Cellulase on the Physical Properties and Drainability of OCC Pulp}, journal = {Forest and Wood Products}, volume = {67}, number = {1}, pages = {133-145}, year = {2014}, publisher = {University of Tehran}, issn = {5052-2008}, eissn = {2383-0530}, doi = {10.22059/jfwp.2014.50443}, abstract = {This research was done to evaluate of cellulase potential to improve the physical properties and drainability of OCC pulp. The OCC pulp with 10% consistency was treated enzymatically under constant conditions of temperature 50°C for 60 min and pH range of 5-5.5 by different levels of 0.05, 0.1, 0.2, 0.3 and 0.5% from cellulase (based on oven dry weight of waste paper). Also OCC pulps were separately pre-treated at different times of 30, 90, 120 and 150 min at given cellulase charge (0.3%). In addition, enzyme pre-treated OCC pulps were refined mechanically at constant revolution of 2000 rpm. The results showed that without employing refining, enzymatic pre-treatment caused to improve the pulp freeness by about 22% proportional to control sample (non enzyme treated pulp with 470 ml, CSF). Using 0.3% and 0.5% were resulted as same as the highest freeness (600 ml, CSF). With increase in cellulase charge from 0.05 to 0.3%, the paper with lower calliper and higher density was resulted. Also, in unrefined OCC pulp, use of shorter duration of enzymatic treatment (30-60 min) was resulted in a pulp with higher density and air resistance. Maximum freeness (645 ml, CSF) was attained at 90 min. Increasing the enzyme level followed by refining caused to improve pulp freeness and a range of 0.05-0.1% cellulase is advisable as the best level of enzyme usage.}, keywords = {OCC pulp,Cellulase enzyme,Pulp refining,Drainability,Physical properties}, title_fa = {تأثیر آنزیم سلولاز بر ویژگی‌های فیزیکی و قابلیت زه‌کش خمیرکاغذ OCC}, abstract_fa = {این تحقیق برای ارزیابی پتانسیل آنزیم سلولاز در بهبود ویژگی‌های فیزیکی و قابلیت زه‌کش خمیرکاغذ OCC انجام شد. خمیرکاغذ OCC با درصد خشکی 10 درصد، تحت شرایط ثابت درجۀ حرارت °C50، مدت‌زمان60 دقیقه، و محدودۀ 5/4ـ5/5 pH در سطوح مختلف 05/0، 1/0، 2/0، 3/0، و 5/0درصد (بر‌اساس وزن خشک خمیرکاغذ) با آنزیم سلولاز پیش‌تیمار شد. همچنین، خمیرکاغذهای OCC در زمان‌های مختلف 30، 90، 120، و150 دقیقه در غلظت ثابت سلولاز (3/0 درصد) به‌‌طور مجزا پیش‌تیمار آنزیمی ‌‌شدند. در ادامه، خمیرکاغذهای پیش‌تیمار‌شده با آنزیم، در دور ثابت 2000 پالایش مکانیکی شدند. نتایج نشان داد پیش‌تیمار آنزیمی ‌‌بدون اعمال پالایش موجب افزایش درجة روانی خمیرکاغذ به میزان حدود 22 درصد در مقایسه با نمونۀ شاهد (خمیرکاغذ تیمار‌نشده با درجة روانیml, CSF 470) شد. استفاده از 3/0 و 5/0 درصد به‌‌طور مشترک بیشترین درجة روانی (ml, CSF 600) را نتیجه داد. با افزایش مصرف آنزیم سلولاز از 05/0 درصد به 3/0 درصد، کاغذهای با ضخامت کمتر و دانسیتۀ بیشتر حاصل آمد و در مصرف بیشتر (5/0 درصد) دانسیتۀ کاغذ کاهش یافت. در خمیرکاغذ OCC پالایش‌نشده، استفاده از زمان کوتاه‌تر تیمار آنزیمی ‌‌(30 تا 60 دقیقه)، خمیرکاغذهای با دانسیته و مقاومت به عبور هوای بیشتری را نتیجه داد. حداکثر درجة روانی خمیرکاغذ (ml, CSF 645) در مدت‌زمان 90 دقیقه به‌دست آمد. افزایش مصرف آنزیم همراه با پالایش، موجب بهبود درجة روانی خمیرکاغذ شد و بهترین سطح مصرف آنزیم در محدودۀ 1/0ـ‌05/0 درصد پیشنهاد می‌شود.}, keywords_fa = {آنزیم سلولاز,پالایش خمیرکاغذ,خمیرکاغذ OCC,قابلیت زه‌کش,ویژگی‌های فیزیکی}, url = {https://jfwp.ut.ac.ir/article_50443.html}, eprint = {https://jfwp.ut.ac.ir/article_50443_7adf09c75612aa8741a261fda804029d.pdf} } @article { author = {Ebrahimpour Kasmani, Jafar and Mahdavi, Saeed and Samariha, Ahmad}, title = {Improvement of Mechanical and Optical Properties of Mechanical Printing Paper after Coating with Nanoclay and Precipitated Calcium Carbonate}, journal = {Forest and Wood Products}, volume = {67}, number = {1}, pages = {147-155}, year = {2014}, publisher = {University of Tehran}, issn = {5052-2008}, eissn = {2383-0530}, doi = {10.22059/jfwp.2014.50444}, abstract = {This study was conducted to investigate the low weight coating (LWC) effects on mechanical and optical properties of printing papers produced by Mazandaran Wood and Paper Industries Co. (MWPI). Two mineral pigments including nanoclay and precipitated calcium carbonate (PCC) were applied by blade coating method in different weight percentages of latex. Surface structure of coated paper was characterized by atomic force microscopy (AFM). Also, mechanical and optical properties of coated paper and control were measured. Comparison of the characteristics showed that surface of coated paper with nanoclay had better uniformity and smoothness than PCC due to higher specific area and plate form shape. There were no significant differences among the paper strength except tensile stiffness. Yellowness of the LWC paper with nanoclay decreased by approximately 20% compared to the control, whereas there were no significant differences among of brightness and opacity of LWC paper and control.}, keywords = {Coating,Atomic Force Microscope,precipitated calcium carbonate,Nanoclay,Mechanical and optical properties}, title_fa = {بررسی بهبود ویژگی‏های مکانیکی و نوری کاغذهای چاپ پس از پوشش‏ دهی با رنگدانه‏ های نانورس و کربنات کلسیم رسوبی}, abstract_fa = {این تحقیق با هدف بررسی تأثیر پوشش‏دهی سبک بر مقاومت‏ها و ویژگی‏های نوری کاغذ چاپ شرکت چوب و کاغذ مازندران انجام شد. دو رنگدانة معدنی نانورس و کربنات کلسیم رسوبی در درصدهای وزنی مختلف نسبت به لاتکس برای پوشش‏دهی به روش تیغه‏ای استفاده شد. از میکروسکوپ نیروی اتمی برای بررسی ساختار سطح کاغذ استفاده شد. همچنین، خواص مقاومتی و نوری کاغذهای شاهد و پوشش‏شده اندازه‏گیری شد. مقایسۀ این ویژگی‏ها نشان داد سطح کاغذ پوشش‏یافته با نانورس به‏دلیل زیادتر‏بودن سطح ویژۀ نانورس و تفاوت در شکل ذرات آن (صفحه‏ای)، در مقایسه با کربنات کلسیم رسوبی، از یکنواختی و صافی نسبتاً خوبی برخوردار است. اختلاف معنی‏داری بین مقاومت‏‏های کاغذ، به‏جز سفتی کشش، وجود نداشت. زردی کاغذهای پوشش‏دهی‏شدة سبک با نانورس تا حدود 20 درصد در مقایسه با شاهد کاهش یافت؛ درحالی ‏که بین روشنی و ماتی کاغذهای پوشش‏دهی‏شده با نمونۀ شاهد، اختلاف معنی‏داری وجود ندارد.}, keywords_fa = {پوشش‏دهی,کربنات کلسیم رسوبی,مقاومت‏های کاغذ,میکروسکوپ نیروی اتمی,نانورس,ویژگی‏های نوری}, url = {https://jfwp.ut.ac.ir/article_50444.html}, eprint = {https://jfwp.ut.ac.ir/article_50444_2e617bce16948063e3a6f05b44e3f25b.pdf} } @article { author = {Bayatkashkoli, Ali}, title = {Effect of Subsidy Reform on the Workshops and Store of Wood Products}, journal = {Forest and Wood Products}, volume = {67}, number = {1}, pages = {157-171}, year = {2014}, publisher = {University of Tehran}, issn = {5052-2008}, eissn = {2383-0530}, doi = {10.22059/jfwp.2014.50445}, abstract = {Subsidy reform was an important step for the country economic flourishing. Effect of subsidy reform was not found on the lumber and wood products in Iran. Therefore, their effect manner on the commodities is an important question. The research methodologies are descriptive analytic and survey and also, inflation rate formula, price growth formula, questionnaire statistical and Mann-Whitney U test was used. The results show that the effect of subsidy reform on the economic situation of these workshops and store are weak, but this effect on coast and price of their products more than others such as their competition. Their products orders are increase without change of their income or benefit and also, this effect are case more increase and change in price and consume of some products such as medium density fiber board than others products. Mann-Whitney U test show that the answer producers or marketer in before subsidy reform are similar to after subsidy reform. But consume of interior products and inexpensive such as interior MDF and particle board and also price change of furniture and wooden cupboard are more than before subsidy reform and the difference was significant at the 95% confidence level. Inflation rate of wood and paper products due to subsidy reform have been more growth than before subsidy reform.}, keywords = {wood products,workshops and store of furniture,Inflation rate,Subsidy Reform}, title_fa = {تأثیر هدف‌مندی یارانه‌ها بر بازار فرآورده‌های چوبی کارگاه‌ها و فروشگاه‌های کشور}, abstract_fa = {هدف‌مندی یارانه‌ها گام مهمی ‌‌‌برای شکوفایی اقتصاد کشور بود. اثر هدف‌مندی یارانه‌ها بر چوب و محصولات چوبی ایران مشخص نبود و چگونگی اثر آن بر این محصولات کارگاه‌ها و فروشگاه‌های کشور پرسشی اساسی است. روش‌‌شناسی تحقیق پیمایشی بود و با محاسبة نرخ تورم و درصد تغییرات قیمت تولیدکنندۀ چوب و فرآورده‌های چوبی و با آزمون من ویتنی یو[1] و تحلیل توصیفی به آزمون سؤال پرداخته شد. نتایج نشان می‌‌‌دهد اثر هدف‌مندی یارانه‌ها بر وضعیت اقتصادی این بنگاه‌‌های محصولات صفحه‌‌ای و چوبی صنایع مبلمان ضعیف است، اما هزینه و قیمت نهاده‌‌های آن‌ها را بیشتر از سایر موارد، مانند رقبا و رقابت، تحت تأثیر قرار داده است. نیز سفارش محصولات را بدون تغییر درآمد یا سود افزایش داده و باعث افزایش و تغییر در قیمت و مصرف برخی محصولات مانند تخته‌فیبر نیمه‌سنگین در مقایسه با دیگر محصولات شده است. آزمون من ویتنی یو نشان می‌‌‌دهد پاسخ فروشندگان و کارگاه‌ها قبل و بعد از هدف‌مندی غالباً یکسان است، اما مصرف محصولات داخلی و ارزان‌قیمت مانند تخته‌فیبر داخلی و تختۀ خرده‌چوب معمولی و همچنین تغییر قیمت انواع مبل‌‌ها و قفسه‌‌های چوبی در بعد از هدف‌مندی یارانه‌ها بیشتر بوده و در سطح 95 درصد معنی‌‌دار است. نرخ تورم تولید‌کنندۀ محصولات چوب و کاغذ در بعد از هدف‌‌مندی بیشتر از قبل از آن است.  }, keywords_fa = {فرآورده‌های چوبی,فروشندگان و کارگاه‌های مبلمان,نرخ تورم,هدف‌مندی یارانه‌ها}, url = {https://jfwp.ut.ac.ir/article_50445.html}, eprint = {https://jfwp.ut.ac.ir/article_50445_5f88d5a10972086bd5091970bd5a0849.pdf} }