@article { author = {Mirzadeh Vaghefi, Saeideh Sadat and Jalili, Adel and Jamzad, Ziba}, title = {Effects of Giberlic Acid, Sulfuric Acid and Potassium Nitrate on Seed Germination of Three Native Species of Hawthorn of Iran}, journal = {Forest and Wood Products}, volume = {66}, number = {2}, pages = {135-146}, year = {2013}, publisher = {University of Tehran}, issn = {5052-2008}, eissn = {2383-0530}, doi = {10.22059/jfwp.2013.35447}, abstract = {In this study seed germination problem of this genus regarding different various methods weretested. Pretreatments were conducted using giberlic acid, KNO3 & Sulfuric acid. Three endemicspecies including Crataegus babakhanloui, C. aminii, and C. persica were studied. To evaluatethe germination responses, experiment were carried out as a completely randomized designwith three replications that each replication contains 30 seeds. Results indicated that the mosteffective treatment for C. aminii is KNO3 1% with 38.66% seed germination. Sulfuric acidtreatments (98%, ‹15) and Sulfuric acid 50% for ‹15 and ‹30 minutes had no germination. InC. babakhanloui, kno3 1% treatment with 44% germination and Sulfuric acid treatments (98%,‹15) with 9.33% germination has the highest and the lowest success respectively in comparethe other treatments. In C. persica KNO3 0.5 % treatment with 49.33% seed germination hasthe highest germination rate, in contrary there was no germination in Sulfuric acid treatments(98%, ‹30). Despite of better performance of potassium nitrate treatment, it does not seem apractical method for germination. In this case for mass germination stimulus, sulfuric acidtreatments look more practical.}, keywords = {crataegus aminii,crataegus babakhanloui,crataegus persica,giberlicacid,KNO3,sulfuric acid treatment}, title_fa = {تأثیر اسید جیبرلیک، اسید سولفوریک، و نیترات پتاسیم بر جوانه‌زنیِ بذر سه گونۀ زالزالک بومی ایران}, abstract_fa = {در این تحقیق، با توجه به مشکلات جوانه‌زنیِ بذر زالزالک، روش‌های گوناگون تیمار بذر قبل از کاشت آزمایش شد. پیش‌تیمارها با استفاده از اسید جیبرلیک، اسید سولفوریک، و نیترات پتاسیم، انجام شد. گونه‌های بررسی‌شده عبارت‌اند از: C. babakhanloui، Crataegus aminii، و C. persica که هر سه مورد از گونه‌های انحصاری ایران‌به‌شمار می‌روند. برای بررسی، آزمایش‌ها با سه بار تکرار، که هر تکرار 30 بذر را شامل می‌شد، به‌صورت کاملاً ‌‌‌تصادفی انجام شد. نتایج نشان داد که بهترین و مؤثرترین تیمار در گونۀ C. amini تیمار نیترات پتاسیم 1 درصد با 667/38 درصد جوانه‌زنی بیشترین جوانه‌زنی را داراست. تیمارهای اسید سولفوریک 98 درصد به مدت 15 دقیقه، و اسید سولفوریک 50 درصد به مدت 15 و 30 دقیقه فاقد جوانه‌زنی‌اند. در گونۀC. babakhanloui  تیمار نیترات پتاسیم 1 درصد با 44 درصد جوانه‌زنی بالاترین درصد جوانه‌زنی را دارد و تیمار اسید سولفوریک 98 درصد به مدت 15 دقیقه با 33/9 درصد جوانه‌زنی نا‌موفق‌ترین تیمار در این گونه است. در C. persica درصد جوانه‌زنی تیمار نیترات پتاسیم 5/0 درصد با 33/49 درصد بالاترین درصد جوانه‌زنی، و تیمار اسید سولفوریک 98 درصد به مدت 30 دقیقه فاقد جوانه‌زنی است. در تیمار شاهد هیچ‌گونه جوانه‌زنی مشاهده نشد. با وجود عملکرد بهتر تیمارهای نیترات پتاسیم به‌علت نیاز به جدا‌کردن درون‌بر چوبی بذر به‌سبب اثر مستقیم نیترات پتاسیم، استفاده از این روش در سطح تولید بالا میسر نیست و موقعیت کاملاً آزمایشگاهی است. تیمارهای اسید سولفوریک با وجود درصد پایین جوانه‌زنی در برخی گونه‌ها کاربردی‌تر است.}, keywords_fa = {اسید جیبرلیک,اسید سولفوریک,جوانه‌زنی بذر,نیترات پتاسیم}, url = {https://jfwp.ut.ac.ir/article_35447.html}, eprint = {https://jfwp.ut.ac.ir/article_35447_ee64098fafffd2c0acf2c001cb903b05.pdf} } @article { author = {Abdi, Ehsan and Moghadamirad, Mostafa and Rahbari Sisakht, Saeed and Majnounian, Baris and Mousavi, Fatemeh}, title = {Optimizing Forest Road Cross Drainage Using CULSED}, journal = {Forest and Wood Products}, volume = {66}, number = {2}, pages = {147-154}, year = {2013}, publisher = {University of Tehran}, issn = {5052-2008}, eissn = {2383-0530}, doi = {10.22059/jfwp.2013.35448}, abstract = {Forest roads are known as the most important factor of sediment production in forestecosystems. Because of the importance of this issue, several models developed based onempirical relationships to estimate sediment yield. In this study, the amount of annual sedimentyield derived from a forest road network was estimated as tons per year using CULSED modelin ArcGIS. Base spatial layers such as: topography, stream, roads, and culverts were used inthis model. Additional data such as the bed rock, vegetation, average precipitation, road age,the amount of traffic, road surface and road gradient were used in the model. First, digitaldatabases were developed and the model was run. Then places with high rates of sedimentyield were specified and some culverts were designed in appropriate places to decrease theamount of sediment production. The results showed that the amount of sediment with regards toexisting 38 culverts was 13.2 tons per year. Adding 16 proposed culverts in the areas with highsediment production resulted in 36% decrease in sediment yield. So, given the importance ofreducing sedimentation from roads in the forest, this tool can be used before road constructionto find optimal number and location of culverts by engineers. However, due to lack of availabledata and a native model, some uncertainty will be encountered that should be considered.}, keywords = {Culvert,CULSED,forest road network,Sediment,stream}, title_fa = {بهینه‌سازی زهکش‌های عرضی شبکة جادۀ جنگلی با استفاده از مدل CULSED (مطالعة موردی: بخش نم‌خانه، جنگل خیرود)}, abstract_fa = {جاده‌های جنگلی مهم‌ترین عامل تولید رسوب در اکوسیستم‌های جنگلی‌اند. به‌سبب اهمیت این موضوع، تاکنون مدل‌های زیادی بر ‌اساس روابط تجربی به‌‌منظور برآورد رسوب تهیه شده است. در این مطالعه، میزان رسوب سالانۀ حاصل از شبکة جادۀ جنگلی بخش نم‌خانه به‌صورت تن در سال و با استفاده از مدل CULSED در نرم‌افزار ArcGIS برآورد شد. لایه‌های مکانی پایه شاملِ توپوگرافی، آبراهه‌ها، جاده‌ها، و آبروها، و داده‌های تکمیلی نیز شامل نوع سنگ مادر، میزان پوشش گیاهی، متوسط بارش، عمر جاده، میزان ترافیک، نوع روسازی، و شیب جاده بودند که در مدل استفاده شدند. ابتدا پایگاه داده‌های رقومی مورد نیاز مدل تشکیل و مدل بر اساس آن اجرا شد. سپس مکان‌هایی که میزان رسوب بالایی داشتند، مشخص شدند و با تعیین آبروهای اضافی در مکان‌های مناسب، سعی شد تولید و ورود رسوب به شبکة هیدروگرافی منطقه کاهش یابد. نتایج نشان داد مقدار رسوب با توجه به 38 آبروی موجود در منطقه 2/13 تن در سال است که با افزودن 16 آبروی پیشنهادی در قسمت‌‌های دارای رسوب بالا، مقدار رسوب به 5/8 تن در سال، یعنی حدود 36 درصد، کاهش یافت. بنابراین، با توجه به اهمیت کاهش رسوب حاصل از جاده‌‌ها در جنگل، مهندسان برای یافتن تعداد و مکان بهینۀ آبروها، می‌توانند قبل از ساخت جاده‌ها از این ابزار استفاده کنند. البته با توجه به داده‌‌های مکانی موجود و فقدان مدل بومی، قطعیت کافی در نتایج وجود نخواهد داشت که باید در نظر گرفته شود.}, keywords_fa = {آبرو,رسوب,رودخانه,شبکة جادۀ جنگلی,CULSED}, url = {https://jfwp.ut.ac.ir/article_35448.html}, eprint = {https://jfwp.ut.ac.ir/article_35448_aca2645e604dbb4e6f378d83268e7845.pdf} } @article { author = {Mohammadalizadeh, Khosrow and Namiranian, Manuchehr and Zobeiri, Mahmoud and Hoorfar, Abd-alhosein and Marvie Mohajer, Mohammad Reza}, title = {Modeling of Frequency Distribution of Tree's Height in Uneven- aged Stands (Case study: Gorazbon district of Khyroud forest)}, journal = {Forest and Wood Products}, volume = {66}, number = {2}, pages = {155-165}, year = {2013}, publisher = {University of Tehran}, issn = {5052-2008}, eissn = {2383-0530}, doi = {10.22059/jfwp.2013.35449}, abstract = {To study the frequency distribution of the data for the height of trees in uneven-aged standsin Gorazbon forest and its modeling, some statistical distribution were used. The utilized databelong to 196 trees (Fagus orientalis, Betulus carpinus, Quercus castaneifolia, Alnus subcordata,Acer velutinum etc.) that were extracted from the data related to the forest management planof Gorazbon district located at Khyroud forest. The range of the trees’ height measured wasbetween 5 and 51 meters which is an indication of height variable in the northern forests. Afterinitial calculations, four distributions Weibull, Gamma, Normal and Lognormal for frequencydistribution modeling of height variable were selected and related pertinent calculation weredone. The results of Anderson-Darling test and P-P plot showed that lognormal distribution isnot an appropriate model for frequency distribution modeling of trees’ height. Among the otherthree distributions, Weibull, Gamma and Normal are respectively more suitable.}, keywords = {gamma distribution,height of trees,modeling of frequency distribution,unevenaged stands,Weibull distribution}, title_fa = {مدل‌سازی توزیع فراونی ارتفاع درختان در توده‏های ناهمسال (مطالعۀ موردی: بخش گرازبن جنگل خیرود)}, abstract_fa = {برای مطالعۀ توزیع فراوانی داده‏های ارتفاع درختان در توده‏های ناهمسال و مدل‌سازی آن از چند توزیع آماری استفاده شد. منطقۀ مورد مطالعه شامل شش پارسل از بخش گرازبن جنگل خیرود است که نمونه‏گیری در آن‌ها به‏روش نظام‌مند با شبـکۀ 150×100 متـر و قطعات نمونۀ دایـره‏ای 10 آری انجام شـده است. از داده‏های حاصـل از این نمونه‏گیری، ارتفاع 196 اصله درخت (راش، ممرز، بلند مازو، توسکا، پلت و...) به‏عنوان یافته‏های یک نمونۀ تصادفی از متغیر ارتفاع در نظر گرفته شدند. بازۀ ارتفاعی درختان اندازه‏گیری‌شده بین 5 و 51 متر است که معرّف تغییرات متغیر ارتفاع درختـان در جنگل‏های شمال است. بعـد از محاسبات مقدماتـی، چهار توزیع وایبول، گاما، نرمال، و لگ‏نرمال برای مدل‌سازی توزیـع فـراوانی متغیر ارتفاع انتخاب و محاسبات مربوطه انجـام شد. نتـایج حاصـل از آزمـون انـدرسـون‌ـ‌دارلینـگ و نمـودار P-P نشان داد که توزیع لگ‏نرمال مدل مناسبی برای مدل‌سازی توزیع فراوانی ارتفاع درختان نیست و از سه توزیع دیگر، به‏ترتیب، توزیع‏های وایبول، گاما، و نرمال برای این کار مناسب‌ترند.}, keywords_fa = {ارتفاع درختان,توده‏های ناهمسال,توزیع وایبول,توزیع گاما,مدل‌سازی توزیع فراوانی}, url = {https://jfwp.ut.ac.ir/article_35449.html}, eprint = {https://jfwp.ut.ac.ir/article_35449_e03db14493da5f00578c997dffb4d218.pdf} } @article { author = {Asadicorom, Fereshteh and Mirzaie-Nodoushan, Hosein and Emam, Mitra and Bakhshi-Khaniki, Gholam Reza}, title = {Drumstick Plant Population Responses to Culture Media in Callus Induction and Regeneration}, journal = {Forest and Wood Products}, volume = {66}, number = {2}, pages = {167-176}, year = {2013}, publisher = {University of Tehran}, issn = {5052-2008}, eissn = {2383-0530}, doi = {10.22059/jfwp.2013.35450}, abstract = {Drumstick (Moringa peregrina (Forssk). Fiori) is one of the valuable tropical forest treespecies. It is endangered since long time ago, due to its particular characteristics, extensiveseed harvesting and weak regeneration. This research was conducted in order to investigate theeffects of several culturing media on micropropagation of three plant populations of the speciesand their interaction effects. Immature seeds collected from Chanf, Benet and Kenshki locatedin Sistan and Baluchestan province, Iran, were used to perform the study. Buds of germinatedseeds were aseptically grown on eight combinations of two basic culture media, MS and half-MS and various concentrations of BA and 2iP hormones. Several characteristics were recordedon the produced plantlets. The plantlets rooted on two successive rooting media and plantedon a mixture of pit and vermiculite. A few samples of the studied plant populations showedstrong regenerative callus induction. Analysis of variance revealed significant differencesbetween the studied populations on number of branches, active bud numbers, callus volume,and length of the longest branches on the plantlets. Moreover, a significant difference at onepercent of probability was observed between the studied growing media based on the majorityof the studied characteristics. It seems the reduction of the concentration of macronutrientsof growing medium would lead to significant increment of shoot production on the species.Regarding the different origins of the studied plant samples, the effect of different genotypeson callus induction was clearly observed.}, keywords = {callus,drumstick,interaction,plant population,Tissue culture}, title_fa = {واکنش جمعیت‌هایی از گز روغنی در محیط‌های مختلف کشت در تولید کالوس و باززایی}, abstract_fa = {گز روغنی (Moringa peregrina (Forssk). Fiori) از گونه‌های با‌ارزش جنگلی مناطق گرمسیری است که به‌سبب ویژگی‌های خاص رویشی و نیز برداشت بی‌رویۀ بذر و زادآوری نامناسب سال‌هاست در معرض خطر قرار گرفته است. این تحقیق به‌منظور مطالعۀ اثر چندین محیط کشت در تکثیر و ریز ‌ازدیادی پایه‌هایی از سه جمعیت گز روغنی و اثر متقابل این دو عامل انجام شد. بدین‌منظور، بذر نارس از مناطق چانف، بنت، و کنشکی واقع در استان سیستان و بلوچستان جمع‌آوری شد و جوانه‌های حاصل از رویش بذر در هشت ترکیب از دو محیط کشت پایۀ MS و 2MS/1 با غلظت‌های متفاوت هورمون‌های BA و 2iP کشت شدند. گیاهچه‌های حاصل از شاخه‌زایی در دو محیط‌ کشت مختلف ریشه‌دار شدند و در مخلوطی از پیت و ورمیکولایت مستقر شدند. برخی نمونه‌ها از جمعیت‌های مورد مطالعۀ دارای کالوس‌زایی با توان باززایی بالا بودند. تجزیۀ واریانس داده‌ها نشان داد بین جمعیت‌ها از نظر صفات تعداد شاخه، تعداد جوانۀ فعال، حجم کالوس تولید‌شده، و طول بلندترین شاخه، اختلاف معنی‌داری در سطح یک درصد وجود دارد. علاوه‌‌بر‌‌این، بین محیط کشت‌ها، در مورد کلیۀ صفات، ‌جز حجم کالوس تولید‌شده، اختلاف معنی‌داری در سطح یک درصد وجود داشت. به‌نظر می‌رسد با کاهش غلظت عناصر غذایی پرمصرف در محیط کشت، میزان تولید شاخه در این گونه به‌طور معنی‌داری افزایش ‌یابد. با توجه به منشأ متفاوت نمونه‌های گیاهی، تفاوت بین مناطق که ممکن است ناشی از تفاوت‌های ژنتیکی و تأثیر وضعیت محیطی باشد به‌خوبی آشکار شد.}, keywords_fa = {گز روغنی,جمعیت گیاهی,کالوس,محیط کشت}, url = {https://jfwp.ut.ac.ir/article_35450.html}, eprint = {https://jfwp.ut.ac.ir/article_35450_4ef6980d985aaeaa7ff611ae5ea75fc2.pdf} } @article { author = {Bayati, Hadi and Najafi, Akbar}, title = {Performance Comparison Artificial Neural Networks with Regression Analysis in Trees Trunk Volume Estimation}, journal = {Forest and Wood Products}, volume = {66}, number = {2}, pages = {177-191}, year = {2013}, publisher = {University of Tehran}, issn = {5052-2008}, eissn = {2383-0530}, doi = {10.22059/jfwp.2013.35451}, abstract = {Nowadays, regression analysis is a common method to estimate trees stem volume. Althoughttrees trunk volume can be estimated with a certain accuracy, however there are many constraintssuch as normality of variables and homogeneity of errors variance, when foresters use thismethod. In this study, Artificial Neural Networks (ANN) as a subset of the technology ofArtificial Intelligence (AI), was used as a new method to estimate the volume trunk. For thispurpose, 101 trees were selected. Marked trees were located in Research and EducationalForest of Tarbiat Modarres University (REFTMU). DBH, diameter at stump height, enddiameter trunk, trunk height and total tree height were mesuared with high accuracy during treemarking. Two neural network models, multi-layer perceptron (MLP) and radial basis function(RBF), were developed to estimate trunk volume. The results showed that with increasing thenumber of variables, that have more correlation with trunk volume,correlation coefficient ofneural networks increased from 0.80 to .95. Also the RBF neural network was more accuractein trunk volume estimation than to MLP neural network. Comparing evaluation criteria forANN with stepwise regression showed that MLP and RBF neural networks had RMSE value1.18 and 1.05, respectively while the RMSE value of regression was 2.57. Also the regressioncorrelation coefficient is less in compared with two models neural network.}, keywords = {Artificial Intelligence,Forest harvesting,Forest management,Multi-Layer Perceptron,Radial Basis Function,Regression,trees trunk volume}, title_fa = {مقایسۀ عملکرد شبکه‌‌های عصبیِ مصنوعی با تحلیل رگرسیون در برآورد حجم تنۀ درختان}, abstract_fa = {آنالیز رگرسیون روش رایجی است که امروزه برای برآورد حجم تنۀ درختان استفاده می‌‌‌شود. این روش با تعیین رابطه‌‌ای، حجم را با دقت خاصی برآورد می‌‌کند، اما محدودیت‌‌هایی مانند نرمال‌بودن متغیر وابسته و همگن‌بودن واریانس خطاها نیز دارد. در ‌‌این پژوهش سعی شده از شبکه‌‌های عصبی مصنوعی (ANN)، به‌عنوان یکی از زیر‌مجموعه‌‌های فنّاوری جدید هوش مصنوعی (AI)، به‌‌منظور برآورد حجم تنه، استفاده شود. بدین‌منظور، تعداد 101 درخت از درختان نشانه‌‌گذاری‌شدۀ جنگل آموزشی‌ـ‌پژوهشی دانشگاه تربیت مدرس انتخاب، و قطر برابر سینه، قطر در ارتفاع کنده، قطر انتهای تنه، ارتفاع تنه، و ارتفاع کل درخت، با دقت بسیار اندازه‌گیری شدند. از دو مدل شبکۀ عصبی، پرسپترون چند‌لایه (MLP) و تابع پایۀ شعاعی (RBF)، به‌‌منظور پیش‌‌بینی حجم تنه استفاده شد. نتایج نشان داد با افزایش متغیرهایی که همبستگی بیشتری با حجم تنه دارند، ضریب تشخیص شبکۀ عصبی از 80/0 به 95/0 افزایش می‌‌‌یابد. شبکۀ عصبی تابع پایۀ شعاعی در مقایسه با شبکۀ عصبی پرسپترون چند‌لایه دقت بیشتری در برآورد حجم تنه دارد. مقایسۀ معیارهای ارزیابی شبکۀ عصبی مصنوعی با رگرسیون گام‌به‌گام نشان داد که شبکۀ عصبی MLP و RBF به‌ترتیب دارای مقدار RMSE 18/1 و 05/1 است، درحالی‌که مقدار RMSE مدل رگرسیون 57/2 می‌‌‌باشد. ضریب تشخیص رگرسیون در مقایسه با هر دو مدل شبکۀ عصبی نیز مقدار کمتری است.}, keywords_fa = {برآورد حجم تنۀ درخت,بهره‌‌برداری جنگل,پرسپترون چند‌لایه,مدیریت جنگل,تابع پایۀ شعاعی,رگرسیون,هوش مصنوعی}, url = {https://jfwp.ut.ac.ir/article_35451.html}, eprint = {https://jfwp.ut.ac.ir/article_35451_bf05dbb0798fdbe3ff508170c84fa0d3.pdf} } @article { author = {Mohammadkazemi, Faranak and Doosthoseini, Kazem and Enayati, Ali Akbar and Azadfallah, Mohammad}, title = {The Effects of Nano-SiO2 and Type of Lignocellulosic Materials on Physical and Mechanical Properties of Wood-Cement Boards}, journal = {Forest and Wood Products}, volume = {66}, number = {2}, pages = {193-201}, year = {2013}, publisher = {University of Tehran}, issn = {5052-2008}, eissn = {2383-0530}, doi = {10.22059/jfwp.2013.35452}, abstract = {In this study, the effect of nano-SiO2 in four levels of 0, 1, 2, and 3 percent (weight of cement)and the type of lignocellulosic materials on physical and mechanical properties of woodcementboards manufactured by old corrugated container (OCC) and rice husk have beeninvestigated. Totally 8 treatments were taken that each one had three repetitions. Sampleswere provided according to DIN EN 634 and physical and mechanical properties, includingmodulus of rupture, modulus of elasticity, shear strength parallel to surface, hardness, waterabsorption and thickness swelling after 2 & 24 hours immersion in water, have been measured.The Results indicated that in case of using nano-SiO2, OCC-cement boards incorporating1 percent and rice husk-cement boards incorporating 2 percent nano-SiO2 had the highestbending strength and modulus of elasticity. Shear strength parallel to surface and hardnesswere further in boards incorporating 2 percent nano-SiO2. Also, using rice husk in boardmanufacturing has decreased the water absorption compared to OCC.}, keywords = {Cement,nano-SiO2,OCC,Physical and mechanical Properties,Rice Husk}, title_fa = {بررسی اثر نانوسیلیس و نوع مادۀ لیگنوسلولزی بر خواص فیزیکی و مکانیکی پانل‏های چوب-سیمان}, abstract_fa = {در این مطالعه اثر نانوسیلیس در چهار سطح 0، 1، 2، و 3 درصد وزنی سیمان و اثر نوع مادۀ لیگنوسلولزی بر خواص فیزیکی و مکانیکی صفحات چوب‌ـ‌سیمان ساخته‌شده از کارتن‌‏ کهنه و پوستۀ ‏برنج بررسی شده است. در مجموع، هشت تیمار و از هر تیمار سه تکرار تخته ساخته شد. نمونه‏ها مطابق استاندارد DIN EN 634 تهیه و خواص فیزیکی و مکانیکی آن‏ها شامل مدول‏گسیختگی، مدول‏الاستیسیته، مقاومت برشی موازی سطح، سختی، جذب ‏آب، و واکشیدگی ‏ضخامت پس از 2 و 24 ساعت غوطه‏وری در آب اندازه‏گیری شدند. نتایج نشان داد که در حالت استفاده از نانوسیلیس، تخته‏های کارتن‌ کهنه با 1 درصد، و تخته‏های پوستۀ برنج با 2 درصد نانوسیلیس بالاترین مقاومت‏ خمشی و مدول الاستیسیته را داشتند. مقاومت برشی موازی سطح و سختی در تخته‏های حاوی 2 درصد نانوسیلیس بیشتر بوده است. همچنین نتایج نشان داد که استفاده از پوستۀ ‌‏برنج در ساخت تخته‌ها در مقایسه با کارتن‌‏ کهنه جذب ‏آب را کاهش داد.}, keywords_fa = {پوستۀ ‏برنج,خواص فیزیکی و مکانیکی,سیمان,کارتن‏ کهنه,نانوسیلیس}, url = {https://jfwp.ut.ac.ir/article_35452.html}, eprint = {https://jfwp.ut.ac.ir/article_35452_c806d043d000b52d3ba317c372ba1b5c.pdf} } @article { author = {Maleki, Sadegh and Dalvabd, Mosayeb and Rostampour, Akbar and Faezipour, Mehdi}, title = {The Effect of Adhesive Types and Dovetail Fitting Height on Stress Carrying Capacity of Miter Frame Corner Joints Constructed of Particleboard and Medium Density Fiberboard (MDF )}, journal = {Forest and Wood Products}, volume = {66}, number = {2}, pages = {203-214}, year = {2013}, publisher = {University of Tehran}, issn = {5052-2008}, eissn = {2383-0530}, doi = {10.22059/jfwp.2013.35453}, abstract = {This study was conducted to evaluate stress carrying capacity of miter corner joints fabricatedwith dovetail fitting in frames made with particleboard and medium density fiber board(MDF) under diagonal tension loading. In this study, tests were carried out to determinethe effects of dovetail fitting height (9 and 14 mm), and adhesive types (polyvinyl acetate(PVAs), cyanoacrylate (CA) on stress carrying capacity of dovetail joints under diagonaltension loading, and the joints without adhesive were compared. The results indicate that stresscarrying capacity has increased, with the increase of high dovetail. The stress carrying capacityof joints constructed with CA adhesive was higher than that of those constructed with PVAsand without adhesive. Furthermore, the stress carrying capacity joints constructed with MDFwas higher than that of those of particleboard. The lowest ultimate stress carrying capacities(2.61Mpa) were obtained at 9 mm high dovetail of dovetail joints made of particleboard andwithout adhesive. Highest bending moment resistance (8.61Mpa) was observed at 14 mm highdovetail with CA adhesive in medium density fiberboard.}, keywords = {dovetail fitting,MDF,Particleboard,Stress Carrying Capacity}, title_fa = {بررسی تأثیر نوع چسب و ارتفاع دم چلچله بر ظرفیت تحمل تنش در اتصال گوشه‌‌ای فارسی ساخته‌شده از تخته خرده‌چوب و تخته فیبر نیمه‌سنگین (MDF)}, abstract_fa = {این پژوهش با هدف بررسی ظرفیت تحمل تنش در اتصال گوشه‏ای فارسی ساخته‌شده با دم چلچله در تخته خرده‌چوب و تخته فیبر نیمه‌سنگین (MDF) در زیر بار کششی قطری صورت گرفته است. در این تحقیق، اثر ارتفاع دم چلچله در دو سطح 9 و 14 میلی‌متر، نوع چسب پلی وینیل استات (PVAs) و سیانو آکریلات (CA)، و جنس اعضای اتصال (تخته خرده‌چوب و MDF) زیر بار کششی قطری بررسی شد. اتصال‏های ساخته‌شده با حالت بدون چسب مقایسه شدند. نتایج نشان داد با افزایش ارتفاع دم چلچله ظرفیت تحمل تنش اتصال افزایش می‏یابد. ظرفیت تحمل تنش اتصال‏های مونتاژ‌شده با چسب CA در مقایسه با اتصال‏های مونتاژ‌شده با چسب PVAc و بدون چسب بیشتر بود. ظرفیت تحمل تنش بیشتری در اعضای اتصال ساخته‌شده از MDF در مقایسه با اعضای اتصال ساخته‌شده از تخته خرده‌‌چوب مشاهده شد. کمترین ظرفیت تحمل تنش (Mpa 61/2) مربوط به اتصال ساخته‌شده از تخته خرده‌‌چوب با دم چلچله به ارتفاع 9 میلی‏متر و بدون چسب بود. بیشترین ظرفیت تحمل تنش (Mpa 61/8) در اتصال ساخته‌شده از MDF با دم چلچله به ارتفاع 14 میلی‏متر و چسب CA مشاهده شد.}, keywords_fa = {تخته خرده‌‌چوب,دم چلچله,ظرفیت تحمل تنش,MDF}, url = {https://jfwp.ut.ac.ir/article_35453.html}, eprint = {https://jfwp.ut.ac.ir/article_35453_9456034e48596ddc98eaa4df53c15e2d.pdf} } @article { author = {Nourbakhsh, Amir and Ashori, Alireza}, title = {Effects of Nanoclay and Microcrystalline Cellulose on Wood Plastics Composites Properties}, journal = {Forest and Wood Products}, volume = {66}, number = {2}, pages = {215-224}, year = {2013}, publisher = {University of Tehran}, issn = {5052-2008}, eissn = {2383-0530}, doi = {10.22059/jfwp.2013.35454}, abstract = {The main objective of this work was to study the effects of nanoclay (NC), microcrystallinecellulose (MCC), and coupling agent (MAPP) on the mechanical and thermal properties. Theresults showed that mechanical properties of the composites made with MCC were significantlysuperior to those of unfilled. Addition of MAPP could enhance the mechanical and thermalproperties of the blends, due to the improvement of interface bond between the filler andmatrix. The significant improvements in tensile properties of the blends composites made withMAPP and NC were further supported by SEM micrographs. The thermo gravimetric analysisindicated that the addition of 5 wt.% MAPP and 3 wt.% NC remarkably increased the thermalstability of the blends compared to the pure PP. It is to be noted that MCC could not improvethe thermal stability.}, keywords = {Composite,Mechanical properties,microcrystalline cellulose,Nanoclay,Thermal properties}, title_fa = {بررسی اثر نانو‏‏‏رس و میکروکریستالین سلولز بر خواص کاربردی چندسازۀ چوب / پلی‌پروپیلن}, abstract_fa = {در این مطالعه پتانسیل استفاده از نانو‏رس و میکروکریستالین سلولز در ساخت چندسازه بررسی شد. آثار نانو‌ ذرات رس، میکروکریستالین سلولز، و جفت‏کنندۀ مالییکی (MAPP) نیز بر خواص مکانیکی و ریخت‏شناسی و حرارتیِ چندسازه بررسی شد. نتایج خواص مکانیکی، به‏طور مشخص، در چندسازۀ ساخته‏شده در مقایسه با نمونۀ شاهد، برتر بود. نتایج آزمایش‏ها نیز نشان داد که استفاده از MAPP باعث بهبود خواص حرارتی در جریان مخلوط‏سازی در فاز درون‏سطحی و سبب اتصال بهتر بین الیاف و ماتریس می‌شود. خواص برتر کششی چندسازۀ نانو‌رس و میکروکریستالین سلولز نیز از طریق عکسبرداری الکترونی تأیید شد. تحلیل و بررسی رفتار حرارتی چندسازه نیز به کمک آزمون TGA نشان داد که استفاده از 5 درصد MAPP به‌همراه 3 درصد نانو‏رس، به‏طور مشخص، موجب افزایش مقاومت حرارتی چندسازه در مقایسه با سایر تیمارها می‌شود.}, keywords_fa = {جفت‏کنندۀ مالییکی,چندسازه,خواص مکانیکی,خواص حرارتی,میکروکریستالین سلولز,نانو‏رس}, url = {https://jfwp.ut.ac.ir/article_35454.html}, eprint = {https://jfwp.ut.ac.ir/article_35454_9332a4dea783807e9c4162062deedf28.pdf} } @article { author = {Abyaz, Ali and Hamzeh, Yahya and Abdolkahni, Ali and Hedjazi, Sahab}, title = {Effects of Pre-Extraction of Hemicelluloses on the Pulping and Papermaking Properties of Bagasse}, journal = {Forest and Wood Products}, volume = {66}, number = {2}, pages = {225-232}, year = {2013}, publisher = {University of Tehran}, issn = {5052-2008}, eissn = {2383-0530}, doi = {10.22059/jfwp.2013.35455}, abstract = {Biomass pretreatment plays a crucial role in a lignocelluloses feedstock-based biorefinery forprocessing of three major output streams (cellulose, hemicelluloses and lignin) into chemicalsand biofuels. Biomass pretreatment includes processing of lignocellulosic material underaqueous, dilute acid or alkaline media to obtain a cellulosic fraction, which in then produceadded-value products. In this study, the effect of pre-extraction on alkaline pulping (soda)and papermaking properties of Bagasse was investigated. Samples of sugar cane bagassewere hydrolysed by auto hydrolysis with hot-water. Results showed that pre-extractionoptimum conditions were 30 min, 135OC and 10 min 170OC, resulted in extraction yield andholocellulose removal of 86% and 11%, respectively. Also, the pulping optimum conditionswere alkali charge 17%, 165 OC for 1h. The results indicated that for unbleachable pulpproduction the pulping yield from the extracted bagasse is higher than the unextracted bagassebut the bleached pulp from unextracted bagasse have higher yield compared to the extractedbagasse. Pulp strength properties such as the tensile index and the burst index were found to belower when pre-extraction was applied.}, keywords = {Bagasse,Biorefinery,Hemicelluloses,Pre-extraction,Soda pulping}, title_fa = {بررسی آثار پیش‌‌استخراج بر خواص خمیر کاغذسازی و کاغذسازی باگاس در یک سیستم پالایشگاه زیستی}, abstract_fa = {امروزه پالایشگاه زیستی به‌ بخشی از کارخانه‌های خمیرسازی، و کاغذ به موضوع روز برای محققانی تبدیل شده که در این زمینه پژوهش می‌کنند. در این تحقیق آثار پیش‌استخراج همی‌سلولزها بر فرایند خمیر و کاغذسازی از باگاس بررسی شده است. به‌همین‌علت، از روش خودهیدرولیز با آب داغ در دمای oC 140، 155، و 170 به مدت 10، 20، و 30 دقیقه استفاده و آثار پیش‌‌استخراج همی‌سلولزها بر خواص خمیر‌کاغذ حاصله بررسی شد. نتایج نشان داد که استفاده از روش خودهیدرولیز با دمای oC 135 به مدت 30 دقیقه و 170 درجة سلسیوس به مدت 10 دقیقه شرایط مناسبی را برای استخراج همی‌سلولزها فراهم می‌کند؛ به‌طوری‌که بازده استخراج و مقدار حذف هلوسلولز در این شرایط به‌ترتیب در حد 86 درصد و 11 درصد بود. خمیرسازی از باگاس‌های پیش‌استخراج‌شده در سه قلیاییت فعال 11، 14، و 17 درصد نشان داد که هنگام تولید خمیر با کاپای بالا، بازده خمیرسازی از باگاس استخراج‌شده بیش از باگاس استخراج‌نشده است، ولی هنگام تولید خمیر قابل رنگ‌بری، بازده خمیرسازی از باگاس استخراج‌نشده بیشتر است. برای تولید خمیرکاغذ رنگ‌بری‌شده، بازده خمیرسازی از باگاس استخراج‌نشده و استخراج‌شده به‌ترتیب برابر با 1/51 و 3/49، و عدد کاپای این خمیرها به‌ترتیب برابر با 3/19 و 6/18 بود. به‌علاوه، خمیرکاغذ رنگ‌بری‌شدۀ حاصل از باگاس استخراج‌شده خواص مقاومتی کمتری را نشان داد.  }, keywords_fa = {پیش‌‌‌‌‌‌استخراج,همی‌سلولزها,پالایشگاه زیستی,خمیرکاغذ سودا,باگاس}, url = {https://jfwp.ut.ac.ir/article_35455.html}, eprint = {https://jfwp.ut.ac.ir/article_35455_a57843603da39a50c159b2bf81cb3a50.pdf} } @article { author = {Jahan Latibari, Ahmad and Tajdini, Ajang and Sepedehdam, Seyed Javad and Hossein, Mohammad Ali and Hosseinpour, Reza and Gaza, Mohammad}, title = {Investigation on the Utilization of Chemi-Mechanical Pulp from Wheat Straw for Fluting Paper Production}, journal = {Forest and Wood Products}, volume = {66}, number = {2}, pages = {233-241}, year = {2013}, publisher = {University of Tehran}, issn = {5052-2008}, eissn = {2383-0530}, doi = {10.22059/jfwp.2013.35457}, abstract = {Development of wheat straw chemi-mechanical pulping to produce pulp which can partiallysubstitute OCC pulp and suitable for small scale implementation was investigated. Four levels(10, 12, 14 and 16% based on oven dry weight of straw) of NaOH at pulping time of 40minutes and 95°C pulping temperature were used. After digester yield varied between 64.6and 72.7% and the total yield after defibration was measured as 55.45% and 58.3%. Unrefinedpulp freeness varied between 708 and 765 ml CSF. Pulps were refined to about 350 ml CSF ina PFI mill and then hand sheets were made for strength evaluation. The apparent density of thehand sheets varied between 437and 488 kg/m3, tear index between 6.51 and 7.11 mN.m2/g,and tensile index between 29.2 and 30.8 N.m/g. Statistically significant difference at 99%level was not observed between the strength values of the pulps. Wheat straw pulp producedapplying 10% NaOH, 40 minutes pulping time at 95°C was used as the substitute pulp for OldCorrugated Container pulp. The characteristics of the pulp refined to 365 ml CSF was superiorto OCC pulp which indicates that it can be used as reinforcing pulp for OCC.}, keywords = {Chemi-mechanical pulp,fluting paper,wheat straw,yield,Strength properties}, title_fa = {بررسی استفاده از خمیرکاغذ شیمیایی‏مکانیکی کاه گندم در ساخت کاغذ فلوتینگ}, abstract_fa = {این بررسی با هدف ارائۀ روشی برای ساخت خمیر‏کاغذ از کاه گندم انجام گرفت تا بتوان آن را در مقیاس کوچک استفاده و جایگزین بخشی از خمیر‏کاغذ تولیدشده از کارتن کنگره‏ای کهنه کرد. بدین‏منظور، خمیر‏کاغذ با تغییر مقدار قلیاییت فعال (NaOH) در چهار سطح 10، 12، 14، و 16 درصد (بر مبنای وزن خشک کاه گندم) و زمان پخت 40 دقیقه و دمای پخت 95 درجة سانتی‎گراد تهیه شد. بازده بعد از پخت خمیر‏کاغذها بین 6/64 تا 7/72 درصد، و بازده کل بعد از جداسازی الیاف بین 45/55 تا 3/58 درصد متغیر بود. درجۀ ‏‏روانی خمیرکاغذهای پالایش‏نشده نیز بین 708 تا 790 میلی‎لیتر استاندارد کانادایی تغییر کرد .خمیرکاغذ تا درجۀ ‏‏روانی حدود 350 پالایش شد و پس از آن ویژگی‎های کاغذ دست‏ساز از آن‏ها اندازه‎گیری شد. دانسیتة کاغذ بین 437 تا 489 کیلوگرم بر متر مکعب، شاخص مقاومت به پاره‏شدن بین mN.m2/g91/7-51/6، و شاخص مقاومت به کشش بین N.m/g 8/30-2/29 اندازه‎گیری شد. با توجه به اینکه اختلاف معنی‎داری در سطح اعتماد 99 درصد بین ویژگی‎های مقاومتی خمیر‏کاغذ دیده نشد، بنابراین، خمیرکاغذ تهیه‏شده با 10 درصد قلیاییت فعال، 40 دقیقه زمان پخت، و 95 درجة سانتی‎گراد دمای پخت به‏عنوان جایگزینی برای خمیرکاغذ کارتن کنگره‎ای کهنه ارزیابی شد. ویژگی‎های خمیرکاغذ پالایش‏شده تا درجۀ ‏روانی 365 میلی‎متر استاندارد کانادایی برتر از خمیرکاغذ از کارتن کنگره‎ای کهنه اندازه‏گیری شد. با توجه به برتری مقاومتی، از این خمیر‏کاغذ می‎توان به‏عنوان تقویت‏کنندة خمیرکاغذ کارتن کنگره‎ای کهنه استفاده کرد.}, keywords_fa = {بازده,خمیرکاغذ شیمیایی‏ـ‏مکانیکی,کاه گندم,کاغذ فلوتینگ,ویژگی‎های مقاومتی}, url = {https://jfwp.ut.ac.ir/article_35457.html}, eprint = {https://jfwp.ut.ac.ir/article_35457_ddd2cea0e73e683ce2fded9a87fc9f8f.pdf} }