@article { author = {Malekigolandouz, Mostafa and Bayatkashkoli, Ali and Farrokhpayam, Saeid raza and Karimi, Abdollah}, title = {Assessment of the most important efficiency indicators of poplar sawmills in Khalkhal}, journal = {Forest and Wood Products}, volume = {73}, number = {2}, pages = {121-137}, year = {2020}, publisher = {University of Tehran}, issn = {5052-2008}, eissn = {2383-0530}, doi = {10.22059/jfwp.2020.291941.1031}, abstract = {The primary conversion of woodwork involves the sawing process is one of the most important indicators that applicating to evaluate the efficiency of wood processing companies. In today's Iranian wood industry, poplar species is play as important role in supplying primary material. Increasing efficiency with optimizing the important factors involves wooden species, machine and operators is necessary. The province of Ardebil, especially Khalkhal, is one of the important centers for poplar timber production. There are a large number of small and large workshops in the wood industry which 60 workshops were selected. In this descriptive study, survey analysis of effective indicators on the sawmills yields is based on the comparison of analysis with SPSS software units. For this purpose, Friedman test was used to rank the effective indices of sawmills in Khalkhal area. According to the results, the manpower with the average rating of 4.05 is the most important, after which the quality of timber with an average rating of 3.93 in the second rank, management with an average rating of 2.87 in the third rank, the quality of log with the average rating of 2.62 was in fourth place and finally the quality of machinery with the average rating was 1.53 in the last rank. Also, Chi-square test showed that training of manpower on the sawmills efficiency of poplar logs in workshops is very important. Efficiency of poplar sawmills is equal 71% that resulted the consideration important indicators.}, keywords = {Efficiency,logs,poplar,machining,Sawing Process}, title_fa = {ارزیابی مهم‌ترین شاخص‌های مؤثر بر بازده کارگاه‌های چوب‌بری صنوبر در منطقۀ خلخال}, abstract_fa = {مرحله‌ی تبدیل اولیه چوب ‌آلات شامل فرآیند اره‌کردن، یکی از مهم‌ترین شاخص‌های مهم برای ارزیابی راندمان بنگاه-های تولید چوب است. در صنعت امروزی چوب ایران، گونه‌ی صنوبر نقش مهمی در تأمین ماده‌ی اولیه داشته و افزایش راندمان ‌در کارگاه ‌های چوب ‌بری با بهینه‌ سازی عوامل مؤثر بر روی گونه‌ی چوبی، ماشین و اپراتورها ضروری به نظر می‌رسد. استان اردبیل مخصوصاً شهر خلخال یکی از مراکز مهم تولید چوب صنوبر می ‌باشد. در این شهر تعداد زیادی کارگاه‌ های کوچک و بزرگ در صنعت چوب‌بری فعال هستند که در این کار پژوهشی تعداد 60 کارگاه جهت مطالعه انتخاب شدند. در این بررسی توصیفی، تحلیل پیمایشی راندمان گرده‌‌های صنوبر بر مبنای واحد‌ها تحلیل، با نرم افزار SPSS صورت می‌گیرد. از این‌رو آزمون فریدمن به منظور رتبه‌بندی شاخص‌های مؤثر در راندمان گرده‌‌های صنوبر در کارگاه‌های منتخب چوب‌بری منطقه خلخال استفاده شد. طبق نتایج بدست آمده، نیروی انسانی با میانگین رتبه 05/4 مهم‌ترین، پس از آن کیفیت چوب‌آلات با میانگین رتبه 93/3 در رتبه دوم، مدیریت با میانگین رتبه 87/2 در رتبه سوم، کیفیت گرده‌ها با میانگین رتبه 62/2 در رتبه چهارم و نهایتاً کیفیت ماشین‌آلات با میانگین رتبه 53/1 در رتبه آخر قرار گرفت. همچنین آزمون کای‌دو نشان داد، آموزش نیروی انسانی در راندمان گرده‌های صنوبر در کارگاه‌های چوب‌بری بسیار با اهمیت است. راندمان تولید چوب آلات تقریبا برابر 71 درصد می‌باشد که نشان‌دهنده توجه به این شاخص‌ها در کارگاه‌های چوب‌بری می‌باشد.}, keywords_fa = {راندمان,گرده‌ صنوبر,ماشین‌کاری,فرآیند اره‌کردن}, url = {https://jfwp.ut.ac.ir/article_77460.html}, eprint = {https://jfwp.ut.ac.ir/article_77460_b077cd77c3640aef885976fdec54f850.pdf} } @article { author = {Erfani, Sohrab and Rezayati Charani, Pejman and Saadatnia, Mohammad Ali}, title = {Influence of functionalized nano-alumina on improving melamine paper properties}, journal = {Forest and Wood Products}, volume = {73}, number = {2}, pages = {139-150}, year = {2020}, publisher = {University of Tehran}, issn = {5052-2008}, eissn = {2383-0530}, doi = {10.22059/jfwp.2020.292524.1037}, abstract = {In this study, the effects of using nan-oalumina (aluminum oxide) in combination with melamine formaldehyde resin on the mechanical properties of special impregnated decorative paper was investigated. Melamine formaldehyde resin was treated with 1% (w/w)  functionalized nano-silica with 20 nm particle dimensions in addition to functionalized nano-alumina with 20 and 50 nm particle dimensions at 3 weight levels of 0.5, 1 and 5% (w/w) and then, they were used to laminate the base papers. Papers were first impregnated with urea formaldehyde resin and air dried; then, they were laminated with melamine formaldehyde resin mixed with the desired nanoparticles using a painting hair brush. Characteristics of final prepared specimens including resistance to the wearing, cigarette  burns, staining, cracking and impacting were evaluated. The results showed that the resistance to wearing and cracking properties of the laminated papers improved by using nano-alumina, and the addition of finer nano-alumina in melamine formaldehyde resin for coatings of special impregnation papers resulted in a greater improvement in wear and crack resistance indices. Nano-alumina did not have a statistically significant effect on improving cigarette burning resistance, although qualitative comparisons indicated improved cigarette burn resistance with nano-alumina 50 nm and the use of higher percentage of nano-alumina also statistically improved cigarette burning resistance. All in all, nano-alumina with finer and more functional dimensions can be recommended for melamine decorative paper}, keywords = {Decorative paper,impregnation,laminating,nano-alumina,Nano-silica}, title_fa = {تأثیر نانوآلومینای عامل‌دارشده بر بهبود ویژگی‌های کاغذ ملامینه}, abstract_fa = {در این پژوهش اثر استفاده از نانوآلومینای عامل‌دارشده (اکسید آلومینیوم) در دو اندازۀ 20 و 50 نانومتر در ترکیب با رزین ملامین‌فرمالدهید بر شاخص‌های مقاومتی روکش کاغذ تزیینی از کاغذ پایۀ ویژۀ آغشته‌سازی بررسی شد. رزین ملامین‌فرمالدهید همراه با 1 درصد نانوسیلیکای عامل‌دارشدۀ 20 نانومتری و همچنین با افزودن نانوآلومینای عامل‌دار با ابعاد 20  و 50 نانومتر، در سه سطح وزنی 5/0، 1 و 5 درصد تیمار شد و سپس برای روکش کاغذ استفاده شد. بدین ترتیب ابتدا کاغذها به‌ رزین اوره‌فرمالدهید آغشته شده و پس از هواخشک شدن با رزین ملامین‌فرمالدهید تیمارشده به‌وسیلۀ برس مویی نقاشی اندود شدند. شاخص‌های مقاومتی روکش‌های آماده‌شده شامل مقاومت به سایش، مقاومت در برابر سوختن سیگار، مقاومت به ضربه، مقاومت به ترک و مقاومت به اثر لکه ارزیابی شد. نتایج نشان داد که ویژگی‌های مقاومت به سایش و ترک در روکش کاغذها با استفاده از نانوآلومینا بهبود می‌یابد و با استفاده از نانوآلومینای ریزتر در رزین ملامین‌فرمالدهید برای روکش کاغذهای ویژۀ آغشته‌سازی بهبود بیشتری در شاخص‌های مقاومت به سایش و ترک دیده می‌شود. نانوآلومینا در بهبود مقاومت به سوختن سیگار اثر معنی‌دار آماری نداشت؛ اگرچه مقایسۀ کیفی دلالت بر بهبود مقاومت به سوختن سیگار با نانوآلومینای 50 نانومتر داشت و استفاده از درصد بیشتر نانوآلومینا نیز از نظر آماری موجب بهبود مقاومت به سوختن سیگار شد. در مجموع، نانوآلومینا با ابعاد ریزتر و عامل‌دار بیشتر می‌تواند برای ملامینه کردن کاغذ تزیینی توصیه شود.}, keywords_fa = {آغشته‌سازی,اندود کردن,کاغذ تزیینی,نانوآلومینا,نانوسیلیکا}, url = {https://jfwp.ut.ac.ir/article_77461.html}, eprint = {https://jfwp.ut.ac.ir/article_77461_8a63a41318a3c4b0c6459ea98433cac3.pdf} } @article { author = {Heydari;, Hatef and Ebrahimpour Kasmani, Jafar and Mahdavi, Saeed}, title = {Utilization of nano-ligno-cellulose to be replaced with the imported long- fiber pulp in durable paper made from waste lint pulp}, journal = {Forest and Wood Products}, volume = {73}, number = {2}, pages = {151-162}, year = {2020}, publisher = {University of Tehran}, issn = {5052-2008}, eissn = {2383-0530}, doi = {10.22059/jfwp.2020.293203.1044}, abstract = {This study was done to replace the imported long-fiber chemical pulp (LFCP) by adding nano lignocellulose fiber (NLCF) and dual composition of nano-cationic starch (CS) and nano- cationic polyacrylamide (CPAM) for preparing durable paper made from waste lint recycling combing machine. For this purpose, 5% unbleached NLCF and 1% CS or 0.1% CPAM were mixed to waste lint pulp (WLP) as the control. The LFCP was added to the WLP in three amounts of 10%, 20%, and 30%. Also, CS and CPAM at three levels were used separately in WLP. Handsheets were made from 13 types of pulp compositions in grammage of 90 g/m2 and their physical, mechanical and optical properties were measured according to the relevant standards. Based on the results, addition of 1% CS to the control pulp (except for the paper yellowness) could be a good substitution for the LFCP. Also, the addition of NLCF resulted in a significantly decrease of handsheet’s brightness and an increase of handsheet’s yellowness. Furthermore, double fold endurance and softness of handsheets decreased compared with the LFCP, which might be due to the accumulation of NLCF on the surface of the paper according to SEM images. The addition of 0.05% CPAM except for double fold endurance could improve the paper properties compared with using LFCP in WLP. Nano-particle dispersion somewhat improved using dual composition systems and the addition of nano-CS revealed that the paper strength improved compared with using NLCF alone and nano-CPAM.}, keywords = {Long fiber pulp,physical,mechanical,and optical properties,waste lint,durable paper,nano-lignocellulose fiber}, title_fa = {استفاده از نانوالیاف لیگنوسلولزی به‌جای الیاف بلند وارداتی در کاغذهای بادوام تهیه‌شده از خمیرکاغذکاغذ ضایعات لیفی پنبه}, abstract_fa = {این تحقیق به‌منظور جایگزینی خمیرکاغذ الیاف بلند شیمیایی وارداتی با افزودن نانوالیاف لیگنوسلولزی (NLCF) و سیستم‌های دوترکیبی نانونشاستۀ کاتیونی و نانوپلی‌آکریل‌ آمید کاتیونی (CPAM) به خمیرکاغذ تهیه‌شده از ضایعات لیفی پنبه (زیرشانه) برای تهیۀ کاغذهای بادوام انجام گرفت. خمیرکاغذ شیمیایی وارداتی در سه سطح 10، 20 و 30 درصد، NLCF در سطح 5 درصد و همراه با نشاستۀ کاتیونی در سطح 1 درصد یا همراه با CPAM در سطح 1/0درصد به خمیرکاغذ زیرشانه افزوده شدند. همچنین نشاسته و CPAM در سه سطح به‌صورت مجزا در خمیرکاغذ زیرشانه استفاده شدند. کاغذهای دست‌ساز 60 گرمی از 13 ترکیب خمیرکاغذ ساخته شدند و خواص فیزیکی، مکانیکی و نوری آنها طبق استاندارد اندازه‌گیری شد. براساس نتایج، افزودن 1 درصد نشاستۀ کاتیونی به خمیرکاغذ زیرشانه می‌تواند خواص مناسبی (به‌جز زردی کاغذ) را نسبت به استفاده از الیاف بلند به‌دست دهد. همچنین افزودن NLCF رنگبری‌نشده موجب افت روشنی و افزایش زردی کاغذها شده و در مقایسه با افزودن خمیرکاغذ الیاف بلند، موجب کاهش مقاومت به تاخوردگی و صافی کاغذ شده است که ممکن است به‌دلیل تجمع ذرات نانو در سطح کاغذ طبق عکس‌های میکروسکوپ روبشی باشد. افزودن 05/0 درصد CPAM به‌جز مقاومت به تاخوردگی، در مقایسه با استفاده از خمیرکاغذ الیاف بلند در خمیرکاغذ ضایعات لیفی پنبه، سبب بهبود خواص کاغذ شد. پراکنش ذرات در سیستم دوترکیبی نانونشاستۀ کاتیونی تا حدودی بهبود یافت که موجب بهبود مقاومت‌های کاغذ نسبت به افزودن NLCF و نیز نانو-CPAM در خمیرکاغذ زیرشانه شد.}, keywords_fa = {خمیرکاغذ الیاف بلند,خواص فیزیکی,مکانیکی و نوری,ضایعات لیفی پنبه,کاغذ بادوام,نانوالیاف لیگنوسلولزی}, url = {https://jfwp.ut.ac.ir/article_77479.html}, eprint = {https://jfwp.ut.ac.ir/article_77479_b0347ac1adb91e9bd546487ce9933632.pdf} } @article { author = {Gholamiyan, Hadi and Gholampoor, Behnam}, title = {Identifying and evaluating the characteristics of the superchrome and fantachrome coatings in the furniture industry}, journal = {Forest and Wood Products}, volume = {73}, number = {2}, pages = {163-175}, year = {2020}, publisher = {University of Tehran}, issn = {5052-2008}, eissn = {2383-0530}, doi = {10.22059/jfwp.2020.294490.1052}, abstract = {In this study, the possibility of using superchrome and Fantachrome coatings on beech and poplar surface was investigated. Initially, samples were cut into 2×10×10 cm dimensions and after coating with superchrome and fantachrome paints, pull-off and cross-cut adhesion, contact angle and gloss tests were performed on their surface. The properties of coated surface was investigated by light microscopy. According to the results, the contact angle of the coated samples with superchrome and fantachrome significantly increased compared with the control sample in both beech and poplar species. The highest and the lowest amounts of pull-off adhesion strength of superchrome and fantachrome coatings were in fantachrome-coated beech and superchrome-coated poplar, respectively. Also, the results of cross cut adhesion test confirmed the results of pull-off test. After coating, the gloss content of the specimens significantly increased and the highest gloss was related to fantachrome coatings on beech and poplar samples, 141.8 and 141.7 gloss units (GU), respectively. In addition, the results of microscopic examination showed that the primary primer of the coating penetrated the wood texture by 4 microns but the surface chrome coating was 11 microns thick on the wood surface.}, keywords = {Gloss measurement,wood,superchrome,fantachrome,furniture}, title_fa = {شناسایی و ارزیابی ویژگی‌های پوشش‌های سوپرکروم و فانتاکروم در صنعت مبلمان}, abstract_fa = {در این تحقیق امکان استفاده از پوشش‌های سوپرکروم و فانتاکروم بر سطح چوب‌های راش و صنوبر بررسی شد. در ابتدا نمونه‌ها به ابعاد 2×10×10 سانتی‌متر تبدیل شد و پس از پوشش‌دهی با رنگ‌های سوپرکروم و فانتاکروم، آزمون‌های چسبندگی کششی و خراشی، زاویۀ تماس و خاصیت انعکاس آینه­ای سطح‌ بر روی سطح آنها صورت پذیرفت. همچنین به‌منظور بررسی خواص سطحی پوشش، مطالعات میکروسکوپی نمونه‌های پوشش‌داده‌شده با پوشش فانتاکروم با استفاده از میکروسکوپ نوری انجام گرفت. نتایج نشان داد که زاویۀ تماس نمونه‌های پوشش‌داده‌شده با سوپرکروم و فانتاکروم در مقایسه با نمونۀ شاهد در هر دو گونۀ چوبی راش و صنوبر به‌طور چشمگیری افزایش یافت. بیشترین و کمترین میانگین چسبندگی کششی پوشش‌های سوپرکروم و فانتاکروم به‌ترتیب در نمونۀ راش پوشش‌داده‌شده با فانتاکروم و نمونۀ صنوبر پوشش‌داده‌شده با سوپرکروم بود. همچنین نتایج آزمون چسبندگی خراشی تأییدکنندۀ نتایج چسبندگی کششی بود. پس از پوشش‌دهی خاصیت انعکاس آینه­ای سطح سطح نمونه‌ها به‌طور معناداری افزایش یافت و بیشترین خاصیت انعکاس آینه­ای سطح مربوط به پوشش فانتاکروم در نمونه‌های راش و صنوبر به‌ترتیب به مقدار 8/141 و 7/141واحد براق (GU) بود. همچنین نتایج بررسی میکروسکوپی نشان داد پرایمر اولیۀ پوشش به مقدار 4 میکرون در بافت چوبی نفوذ داشته و پوشش نهایی کروم، فیلم پوششی (فیلم رنگی) به ضخامت 11 میکرون بر سطح چوب تشکیل داده است.}, keywords_fa = {سوپرکروم,فانتاکروم,براقیت‌سنجی,مبلمان,چوب}, url = {https://jfwp.ut.ac.ir/article_77462.html}, eprint = {https://jfwp.ut.ac.ir/article_77462_9a14206607e42e89f0cc1b857223e0b8.pdf} } @article { author = {Madhoushi, Mehrab and Malakani, Amin and Ebrahimi, Ghanbar and Rashidi, Alimorad}, title = {Mechanical properties of natural fiber/polypropylene, foamed and reinforced with spherical carbon nanoparticles for application in automotive industry}, journal = {Forest and Wood Products}, volume = {73}, number = {2}, pages = {177-187}, year = {2020}, publisher = {University of Tehran}, issn = {5052-2008}, eissn = {2383-0530}, doi = {10.22059/jfwp.2020.296218.1069}, abstract = {The aim of this study was to investigate the mechanical properties of foamed, reinforced and light weighted natural fiber/polypropylene nanocomposites using spherical carbon nanoparticles for use in the automotive industry. For this purpose, bagasse flour at constant level of 40%, azodicarbonamide foaming agent at 0, 2 and 4% levels, spherical carbon nanoparticles at four levels, namely 0, 0.25, 0.5 and 1% were selected as study variables. Polypropylene as polymeric matrix, and polypropylated maleic anhydride coupling agent (4% constant value) were considered for different nanocomposite compositions. The mixing of materials was performed using an internal mixing machine and then by hot and cold two-step press. Test specimens for density, impact strength, flexural and tensile tests were fabricated using standard molds. The ultrastructure of the nanocomposites was also studied using SEM microscopic images. Results showed that by increasing the amount of foaming agent, the density of the product decreased significantly, but had a negative effect on mechanical strengths except impact strength. Impact strength of lightweight nanocomposites had higher values than that of control samples. It was also found that increasing the amount of carbon nanoparticles was able to compensate for the decrease in other resistances in lightweight nanocomposites and increase their quantities. Ultrastructural examination of the samples also showed that in the presence of carbon nanoparticles, bagasse particles were better dispersed inside the polymer and a better bonding between them and the polymer occurred. Also, the presence of a foaming agent increases the pores and decreases the density.}, keywords = {Automotive industry,Bagasse,Foaming agent,Impact strength,Nanocomposite,Spherical carbon nanoparticle}, title_fa = {خواص مکانیکی نانوکامپوزیت‌های پلی‌پروپیلن-الیاف‌ طبیعی سبک‌شده با عامل فوم‌زا و تقویت‌شده با نانوذرات کربن کروی برای استفاده در صنعت خودرو}, abstract_fa = {تحقیق حاضر با هدف بررسی خواص مکانیکی نانوکامپوزیت‌های پلی‌پروپیلن-الیاف طبیعی سبک‌شده با عامل فوم‌زا و تقویت‌شده با استفاده از نانو‌ذرات کربن کروی‌شکل جهت استفاده در صنعت خودرو‌سازی انجام شد. برای این منظور آرد باگاس در سطح ثابت 40 درصد، عامل فوم‌زا آزو ‌دی‌کربن آمید در 3 سطح صفر، 2 و 4 درصد، ونانوذره کربن کروی‌شکل در 4 سطح صفر، 25/0، 5/0 و 1 درصد به عنوان متغیرهای مطالعه، و پلی‌پروپیلن به عنوان ماده پلیمری زمینه و جفت‌کننده مالئیک انیدرید پلی‌پروپیلینه‌شده (به مقدار ثابت 4 درصد) برای ترکیب‌های مختلف نانوکامپوزیت در نظر گرفته شدند. اختلاط مواد و فرایند ساخت با استفاده از دستگاه مخلوط‌کن داخلی و سپس با استفاده از پرس دو مرحله‌ای گرم و سرد انجام و نمونه‌های آزمونی دانسیته، مقاومت به ضربه فاق‌دار، آزمون‌های خمش و کشش با استفاده از قالب‌های استاندارد ساخته شدند. همچنین ریزساختار نانوکامپوزیت با استفاده از تصاویر میکروسکوپی SEM مورد مطالعه قرار گرفت. نتایج نشان داد با افزایش مقدار عامل فوم‌زا، دانسیته فراورده به طور‌ معنی‌دار کاهش می‌یابد، امّا بر روی مقاومت‌های مکانیکی جز مقاومت به ضربه تاثیر منفی دارد. مقاومت به ضربه نانوکامپوزیت‌های سبک‌شده مقادیر بالاتری نسبت به نمونه شاهد داشتند. همچنین مشخص شد افزایش مقدار نانوذره کربن توانست کاهش سایر مقاومت را در نانوکامپوزیت‌های سبک‌شده جبران و مقادیر آنها را افزایش دهد. بررسی ریزساختار نمونه‌ها نیز نشان‌داد در حضور نانوذره کربن، ذرات باگاس در داخل پلیمر پراکنش بهتری داشتند و اتصال مناسب‌تری بین آن‌ها و پلیمر وجود داشت. همچنین حضور عامل فوم‌زا، سبب افزایش خلل و فرج و کاهش دانسیته گردید.}, keywords_fa = {باگاس,صنعت خودرو,عامل فوم‌زا,مقاومت به ضربه,نانوذرۀ ‌کربن کروی,نانوکامپوزیت}, url = {https://jfwp.ut.ac.ir/article_77466.html}, eprint = {https://jfwp.ut.ac.ir/article_77466_a30b452332eb87e7ffd8ee3361fbf080.pdf} } @article { author = {Akhavan, Reza and Rostamikia, Younes}, title = {Inter-specific competition of juniper trees in Kandiragh forest reserve using O-ring statistic and mark correlation function}, journal = {Forest and Wood Products}, volume = {73}, number = {2}, pages = {189-200}, year = {2020}, publisher = {University of Tehran}, issn = {5052-2008}, eissn = {2383-0530}, doi = {10.22059/jfwp.2020.295907.1066}, abstract = {Forest reserves are a shrinking pattern of biosphere reserves in which unique and rare or endangered species grow naturally. Juniper genus is one of the few indigenous conifers of Iran with habitats in large areas of the country. However, nowadays, despite its importance, there is a declining trend that is particularly critical in areas without control and management. The purpose of the study was to investigate and quantify the inter-specific competition of juniper trees (Juniperus excelsa) with the main associated species, namely pistachio (Pistacia atlantica) and maple (Acer monspessulanum), in Kandirigh forest reserve in Ardabil Province of north-west of Iran. For this purpose, full census inventory was taken in a protected area of 13.2 hectares, and variables of DBH, total height and crown diameter and spatial coordinates of all tree species were recorded. Then, the bivariate O-ring statistic and mark correlation function (MCF) were used to evaluate the competition between the junipers with pistachio and maple. Bivariate O-ring statistic showed that most of the interactions of these three species are independent or, ultimately, at small scales are attractions. Univariate and bivariate mark correlations function also showed that the interested variables of DBH, total height and crown diameter were spatially independent. All of this is due to the lack of significant competition between juniper trees and the associated species in this forest reserve. Thus, pistachio and maple can be introduced as associated species for the reforestation and enrichment of the other juniper habitats with similar conditions.}, keywords = {interaction,Maple,MCF,Pistachio}, title_fa = {تحلیل رقابت بین‌گونه‌ای اُرس در ذخیره‌گاه جنگلی کَندیرق به‌وسیلۀ آماره او-رینگ و تابع همبستگی نشان‌دار}, abstract_fa = {ذخیره‌گاه‌های جنگلی الگوی کوچک‌شده ذخیره‌گاه‌های بیوسفر هستند که در آنها گونه‌های منحصربه‌فرد و کمیاب یا رو به انقراض به‌صورت طبیعی می‌رویند. جنس اُرس از معدود سوزنی‌برگان بومی ایران است که با وجود اهمیت زیاد روندی رو به انهدام دارد که این موضوع به‌ویژه در مناطق حفاظت‌نشده بحرانی‌تر است. در این پژوهش رقابت بین‌گونه‌ای اُرس با گونه‌های همراه در ذخیره‌گاه جنگلی کَندیرق خلخال در استان اردبیل بررسی شد. بدین منظور یک قطعۀ جنگلی به مساحت 2/13 هکتار آماربرداری صددرصد شده و متغیرهای قطر برابرسینه، ارتفاع کل و قطر تاج و مختصات مکانی همۀ گونه‌های درختی ثبت شد. سپس از آمارۀ دومتغیرۀ او- رینگ و تابع همبستگی نشان‌دار برای بررسی رقابت بین‌گونه‌ای اُرس با دو گونۀ اصلی همراه یعنی بَنه و کیکُم استفاده شد. نمودارهای آمارۀ دومتغیرۀ او- رینگ نشان داد که کُنش متقابل این سه گونه بیشتر از نوع استقلال یا در نهایت در مقیاس‌های کوچک از نوع جاذبه است. نمودارهای توابع تک‌متغیره و دومتغیره همبستگی نشان‌دار نیز نشان داد که متغیرهای قطر برابرسینه، ارتفاع کل و قطر تاج در ارتباط متقابل و دوبه‌دوی این سه گونه عمدتاً مستقل از یکدیگرند و درختان مجاور این سه گونه از نظر متغیرهای یادشده همبستگی مکانی معنی‌داری را نشان نمی‌دهند که همۀ این موارد دلیل بر نبود رقابت معنی‌دار بین اُرس و گونه‌های همراه آن در این ذخیره‌گاه است. بنابراین به‌منظور احیا و غنی‌سازی در دیگر رویشگاه‌های اُرس با شرایط مشابه می‌توان بَنه و کیکُم را به‌عنوان گونه‌های همراه وارد رویشگاه اُرس کرد.}, keywords_fa = {بَنه,کُنش متقابل,کیکُم,نمودار MCF}, url = {https://jfwp.ut.ac.ir/article_77478.html}, eprint = {https://jfwp.ut.ac.ir/article_77478_e27df4d4d0a71691fde74aaffd1cd374.pdf} } @article { author = {Salehi, Mansour and Ghods khah, Mehrdad and Amanzadeh, Beitollah and Mousavi Coopar, Seyyed Abdollh}, title = {Yield comparison of different poplar species and clones in Guilan province}, journal = {Forest and Wood Products}, volume = {73}, number = {2}, pages = {201-211}, year = {2020}, publisher = {University of Tehran}, issn = {5052-2008}, eissn = {2383-0530}, doi = {10.22059/jfwp.2020.298070.1078}, abstract = {In order to access the most suitable poplar clones for the purpose of expanding wood farming activities in the lowland areas of Guilan province, twelve different poplar clones from euramericana, deltoides and hybrid poplars were studied in nursery (annual seedlings) and poplar plantation (three-year-old trees). This study was carried out in a Randomized Complete Block Design with three replications at Fakhr Abad research station in 2019. Survival percentage, diameter and height of one-year-old seedlings in nursery as well as survival percentage, diameter at breast height and height of three-year-old trees in poplar plantation were measured at the end of the growing season. Analysis of variance of data obtained from survival percentage, diameter and height of different studied poplar clones showed that there was no significant difference between survival rate of three-year-old trees and diameter of one-year-old seedlings, but there was a significant difference between survival rate and height of one-year-old seedlings and diameter and height of three-year-old trees. Thus P. deltoides Marquette, P. deltoides 92/258, P.eur. Blanc de poitou and P. deltoides 92/160 clones in a group with the highest and P. x. 87m.119 had the lowest survival rate, and P. deltoides Marquette and P. deltoides 92/258 clones had the highest and lowest height growth in nursery, respectively. Also, the study of diameter at breast height and height of three-year-old trees showed that P. deltoides 92/258 and P.eur. I-Sieres had the highest and the lowest diameters, respectively. P.eur. Blanc de poitou clone was not competitive with other clones in height.}, keywords = {Clone,Growth,Guilan,poplar,yield}, title_fa = {مقایسۀ عملکرد گونه‌ها و کلن‌های مختلف صنوبر در استان گیلان}, abstract_fa = {به‌منظور دسترسی به مناسب‌ترین کلن‌های صنوبر با هدف توسعۀ فعالیت‌های زراعت چوب در مناطق جلگه‌ای استان گیلان، 12 کلن مختلف صنوبر از گروه‌های اورامریکن، دلتوئیدس و دو رگ در نهالستان (نهال‌های یک‌ساله) و عرصۀ صنوبرکاری (درختان سه‌ساله) در قالب طرح بلوک‌های کامل تصادفی با 3 تکرار در سال 1397 در ایستگاه تحقیقات زراعی لشت‌نشای گیلان بررسی شد. در پایان دورۀ رویش، درصد زنده‌مانی، قطر یقه و ارتفاع نهال‌های یک‌ساله در نهالستان و همچنین درصد زنده‌مانی، قطر برابرسینه و ارتفاع درختان سه‌ساله در عرصۀ صنوبرکاری اندازه‌گیری شدند. تجزیۀ واریانس داده‌های به‌دست‌آمده از درصد زنده‌مانی، قطر و ارتفاع کلن‌های مختلف تحت بررسی نشان داد که بین درصد زنده‌مانی درختان سه‌ساله و قطر نهال‌های یک‌ساله در کلن‌های بررسی‌شده تفاوت معنی‌داری وجود ندارد، اما بین درصد زنده‌مانی و ارتفاع نهال‌های یک‌ساله و همچنین قطر و ارتفاع درختان سه‌ساله در کلن‌های تحت بررسی تفاوت معنی‌داری مشاهده شد. بدین ترتیب کلن‌هایP. deltoides Marquette ، P. deltoides 92/258، P.eur. Blanc du poitou و P. deltoides 92/160 در یک گروه دارای بیش­ترین و کلن P. x. 87m.119 دارای کم­ترین زنده‌مانی و کلن‌های P. deltoides Marquette و P. deltoides 92/258 به‌ترتیب دارای بیش­ترین و کم­ترین رویش ارتفاعی در نهالستان بودند. همچنین بررسی قطر برابرسینه و ارتفاع درختان سه‌ساله نشان داد که کلن‌های P. deltoides 92/258 وP.eur.I-Sieres به‌ترتیب بیش­ترین و کم­ترین قطر را داشتند ضمن آنکه کلن P. deltoides 92/258 از نظر ارتفاع در مقایسه با دیگر کلن‌ها از موقعیت برتری برخوردار بود، کلن P.eur. Blanc du poitou از نظر رشد ارتفاعی قابل رقابت با کلن‌های دیگر نبود.}, keywords_fa = {رویش,صنوبر,عملکرد,کلن,گیلان}, url = {https://jfwp.ut.ac.ir/article_77473.html}, eprint = {https://jfwp.ut.ac.ir/article_77473_d943049dbb8edbee3a5c299a185aa95f.pdf} } @article { author = {Hashemi, Mahsa and Nikooy, Mehrdad and Salehi, Ali and Naghdi, Ramin}, title = {Short-term effects of water bar construction on soil physical properties of skid trail after logging operation}, journal = {Forest and Wood Products}, volume = {73}, number = {2}, pages = {213-224}, year = {2020}, publisher = {University of Tehran}, issn = {5052-2008}, eissn = {2383-0530}, doi = {10.22059/jfwp.2020.298110.1079}, abstract = {Protective measures are needed to reduce the negative impacts of soil compaction. Water diversions are one of the management tools to reduce the negative impacts of ground skidding and helping soil recovery. In this research, the effects of constructed water bar were studied on the process of soil physical properties recovery in skid trail in west of Guilan. Seven years after logging completion and conservation of skid trail by constructed water bar, changes in soil physical properties were evaluated in two slope classes and three traffic classes in 40 m2 sample plots at wheel tracks and between them. Control samples were selected within 30 m from the edge of the skid trail. Soil samples were collected using a cylinder to a depth of 10 cm. Soil penetration resistance and rut depth were measured by analog hand-held soil penetrometer and rut 5 meter leveling rod, respectively. Influence of slope and traffic changes on soil physical properties was investigated in two treatments, three replications, and 72 samples. The results showed that the slope of the skid trail, traffic intensity and their interaction have significant effective on bulk density, total porosity, penetration resistance and rut depth. Mean bulk density, total porosity and penetration resistance in slope below 10% and low traffic treatment were not significantly different from control area. Overall, the results of study indicated that after log skidding, water bar construction had positive effects on soil physical properties of low slope and traffic trails.}, keywords = {Water diversion,soil conservation,Bulk density,Total prosody,penetration resistance,Rut depth}, title_fa = {آثار کوتاه‌مدت ساخت جوی- پشته بر خصوصیات فیزیکی خاک مسیرهای چوب‌کشی پس از بهره‌برداری}, abstract_fa = {استفاده از اقدامات حفاظتی برای کاهش آثار منفی ناشی از کوبیدگی خاک ضروری است. انحراف‌دهنده‌های آب از ابزار مدیریتی برای کاهش اثرهای منفی چوب‌کشی زمینی و کمک به بازیابی خاک است. در این پژوهش، اثر ساخت جوی- پشته‌های احداث‌شده بر خصوصیات فیزیکی خاک مسیرهای چوب‌کشی در جنگل‌های غرب استان گیلان بررسی شد. هفت سال پس از پایان عملیات چوب‌کشی و حفاظت آنها با احداث جوی-پشته، تغییر خصوصیات فیزیکی خاک در دو طبقۀ شیب و سه طبقۀ ترافیک در قطعات نمونۀ 40 متر مربعی در محل رد چرخ و گرده‌بینه ارزیابی شد. نمونه‌های شاهد در فاصلۀ 30 متری از حاشیۀ مسیر چوب‌کشی انتخاب شدند. نمونه‌ها با استفاده از سیلندر تا عمق 10 سانتی‌متر برداشت شد. مقاومت به نفوذ خاک با استفاده از نفوذسنج جیبی (پنترومتر) اندازه‌گیری شد و اندازه‌گیری شیار با استفاده از شاخص 5 متری انجام پذیرفت. تأثیر تغییرات شیب و ترافیک بر خصوصیات فیزیکی خاک در قالب دو تیمار و سه تکرار و 72 نمونه بررسی شد. نتایج نشان داد که شیب مسیر چوب‌کشی، شدت ترافیک و اثر متقابل این دو تیمار بر جرم مخصوص ظاهری، تخلخل کل، نفوذپذیری و عمق شیار معنی‌دار است. میانگین جرم مخصوص ظاهری، تخلخل کل و مقاومت به نفوذ در شیب زیر 10 درصد و ترافیک کم تفاوت معنی‌داری با منطقۀ شاهد نداشت. در مجموع، نتایج تحقیق حاضر نشان داد که هفت سال پس از زمان چوب‌کشی، احداث جوی-پشته‌ها بر خصوصیات فیزیکی خاک در طبقۀ ترافیک کم و شیب کمتر از 10 درصد تأثیر مثبت داشته است.}, keywords_fa = {انحراف‌دهندۀ آب,جرم مخصوص ظاهری,حفاظت خاک,عمق شیار,مقاومت به نفوذ}, url = {https://jfwp.ut.ac.ir/article_77463.html}, eprint = {https://jfwp.ut.ac.ir/article_77463_692d67ee5c5a549c1892d12dbc3f7c3a.pdf} } @article { author = {Sefidi, Kiomars and Ghavidel, Akbar and Esmaeilpour, Mohammad and Mohammadi, Shilan}, title = {Effect of soil physical and chemical properties on tree cover diversity and structure in Marivan Qamyshlh forests}, journal = {Forest and Wood Products}, volume = {73}, number = {2}, pages = {225-233}, year = {2020}, publisher = {University of Tehran}, issn = {5052-2008}, eissn = {2383-0530}, doi = {10.22059/jfwp.2020.296630.1075}, abstract = {This study was conducted to assess the effect of soil physical and chemical properties on diversity and structure of tree cover in oak forests with an area of 275 hectares in Qamyshlh city of Marivan Kordestan, Iran. For this purpose, a total of 90 samples, each 10 yards, randomly laid out on a regular gird network were selected and in the center of each plot, soil samples were taken at the depth of 0 - 30 cm. Results revealed that the average diameter of trees had a significant positive correlation with phosphorus, potassium, organic matter and carbon to nitrogen ratio in the soil. The results also showed that there is no significant relationship between the most measured soil characteristics and richness, evenness and diversity indicators. However, soil pH with Pirlo and Simpson indexes and phosphorus with Margalef index had a significant negative relationship. Correlation between the percentage of tree species and soil characteristics showed that among the studied species, Q. branti were more sensitive to changes in soil properties compared with other species. However, the analyses of ordination methods showed that there is no direct relationship between species distribution and soil properties. In addition to the soil effects, due to the proximity of the forest land to rural residential areas, it can be said that the most influential factor in shaping the composition, diversity, and structure of Qamyshlh tree species are human factors.}, keywords = {Tree canopy,species density,diversity and evenness,resprouting,Pedology}, title_fa = {تأثیر ویژگی‌های فیزیکی و شیمیایی خاک بر ترکیب و تنوع پوشش‌های درختی در جنگل‌های قامیشله مریوان}, abstract_fa = {این پژوهش با هدف بررسی تأثیر ویژگی‌های فیزیکی و شیمیایی خاک بر تنوع و ساختار پوشش درختی جنگل‌های بلوط منطقۀ قامیشله شهرستان مریوان استان کردستان در منطقه‌ای با مساحت 275 هکتار انجام گرفت. به این منظور 90 قطعه‌ نمونۀ 10 آری به‌صورت منظم تصادفی پیاده شده و در مرکز هر قطعه ‌نمونه، نمونۀ خاک از عمق صفر تا 30 سانتی‌متری برداشت شد. براساس نتایج به‌دست‌آمده، میانگین قطری درختان منطقه، ارتباط مثبت و معنی‌داری با درصد فسفر، پتاسیم، مادۀ آلی و نسبت کربن به نیتروژن خاک دارد. بین بیشتر ویژگی‌های اندازه‌گیری‌شدۀ خاک و شاخص‌های تنوع زیستی غنا، یکنواختی و تنوع ارتباط معنی‌داری وجود ندارد و تنها اسیدیتۀ خاک با شاخص‌های پیلو و سیمپسون و فسفر با شاخص مارگالف در سطح 05/0 ارتباط منفی و معنی‌داری دارند. بررسی همبستگی بین درصد حضور گونه‌های درختی و ویژگی‌های خاک منطقه نشان داد که در بین گونه‌های بررسی‌شده، بلوط برودار Q. brantii از گونه‌های دیگر در برابر تغییرات ویژگی‌های مختلف خاک حساس‌تر بود. با این‌حال نتایج آنالیز رسته‌بندی‌ها نشان می‌دهد که ارتباط مستقیمی بین پراکنش و گسترش گونه‌ها با متغیرهای خاک منطقه مشاهده نمی‌شود. به نظر می‌رسد افزون‌بر اثرهای خاک با توجه به نزدیکی این جنگل‌ها به مناطق روستایی می‌توان گفت که عوامل انسانی تأثیرگذارترین عامل در شکل‌گیری ترکیب، تنوع و ساختار گونه‌های درختی منطقۀ قامیشله است.}, keywords_fa = {پوشش درختی,تراکم گونه‌ای,تنوع و یکنواختی,جست‌دهی,خاک‌شناسی}, url = {https://jfwp.ut.ac.ir/article_77464.html}, eprint = {https://jfwp.ut.ac.ir/article_77464_781cb7913673a963ccc038dc888e5154.pdf} } @article { author = {Rahimizadeh, Naimeh and Babaie Kafaky, Sasan and Sahebi, Mahmod reza and Mataji, Asadollah}, title = {Tree spatial pattern determination by satellite data, object-based classification and O-ring function (Case study: Sangedeh forest - Sari city)}, journal = {Forest and Wood Products}, volume = {73}, number = {2}, pages = {235-246}, year = {2020}, publisher = {University of Tehran}, issn = {5052-2008}, eissn = {2383-0530}, doi = {10.22059/jfwp.2020.295757.1063}, abstract = {Determination of the spatial pattern of trees is one of the important structural parameters of the forest for identifying changes in forest communities and it's monitoring in recent years. On the one hand, extracting this structural parameter using satellite data has a significant impact on reducing cost of inventory and makes it easy to evaluate forests of forest managers. In this study, the spatial pattern of trees in the natural forest of Farim of Mazandaran province was determined by using SPOT7 satellite data. Thus, some tree`s characteristics such as species, diameter at breast height, the diameter of canopies, gaps and the position of each tree were measured in 12 plot with area about one ha (100 m x 100 m). On the other hand, after radiometric and geometric corrections of satellite data, the tree`s canopy and gaps were classified, using the object-based method, and tree position per plot also was determined by canopy gravity center. Then, the spatial distribution pattern of the trees and structure, distinguished and extracted by field inventory and satellite data was compared by O-ring function. The results showed that the overall accuracy of canopy and gaps extracted from satellite data by object-based classification was about 91% and kappa coefficient equaled 0.7. The spatial pattern of trees were random except of the small radius and similar to the pattern of trees in-ground inventory. In total, results showed that SPOT-7 data and the object-based classification have an acceptable potential for determining the spatial pattern of forest stands.}, keywords = {object-based classification,O- ring function,satellite data SPOT7,Hyrcanian forests}, title_fa = {تعیین الگوی مکانی درختان با استفاده از داده‌های ماهواره‌ای، طبقه‌بندی شیءپایه و تابع O-ring (مطالعۀ موردی: جنگل سنگده شهرستان ساری)}, abstract_fa = {تعیین الگوی مکانی درختان به‌عنوان یکی از شاخص‌های مهم ساختاری جنگل، در شناسایی فرایندهای بوم‌شناختی و پایش آن در سال‌های اخیر مورد توجه قرار گرفته است. از سویی تعیین این پارامتر ساختاری با استفاده از تصاویر ماهواره‌ای تأثیر بسیاری در کاهش هزینه‌های آماربرداری و سهولت ارزیابی مدیران جنگل خواهد داشت. در این تحقیق، الگوی مکانی درختان در جنگل‌های طبیعی فریم استان مازندران با استفاده از طبقه‌بندی تصاویر ماهواره‌ای تعیین شد. به این منظور ابتدا برخی مشخصات درختان همچون نوع گونه، قطر برابرسینه، قطر تاج، روشنه‌ها و موقعیت مکانی درختان به‌صورت صددرصد در 12 پلات مربعی یک‌ هکتاری اندازه‌گیری شد. از سوی دیگر داده‌های سنجندۀSPOT-7  با توجه به قدرت تفکیک مکانی و طیفی انتخاب شد و پس از تصحیحات هندسی و رادیومتریک، با استفاده از روش طبقه‌بندی شی‌ء‌پایه، تاج‌پوشش درختان و روشنه‌ها تفکیک و مرکز ثقل تاج درختان، به‌عنوان موقعیت مکانی تک‌پایه‌ها استخراج شد. سپس، الگوی مکانی پراکنش پایه‌ها در آماربرداری زمینی و استخراج‌شده از تصویر ماهواره‌ای توسط تابع O-ring تعیین و با یکدیگر مقایسه شد. نتایج تحقیق نشان داد که تفکیک تاج درختان از روشنه‌ها با دقت 91 درصد و ضریب کاپای 7/0 و الگوی مکانی درختان در تصاویر ماهواره‌ای، مشابه آماربرداری زمینی و به‌صورت تصادفی تعیین شد. به‌طور کلی، تصاویر SPOT-7 و روش طبقه‌بندی شیءپایه، قابلیت مناسبی در تعیین الگوی مکانی پایه‌های درختان جنگلی دارند.}, keywords_fa = {تابع O-ring,تصاویر ماهواره‌ای SPOT7,طبقه‌بندی شیءپایه,جنگل‌های هیرکانی}, url = {https://jfwp.ut.ac.ir/article_77467.html}, eprint = {https://jfwp.ut.ac.ir/article_77467_d9f1a6142acb5ab34a7eb5454288d560.pdf} } @article { author = {Pourkakroudii, Fateme and Pourbabaei, Hassan and Salehi, Ali}, title = {Investigation on structure, physiognomic and habitat needs of Mediterranean cypress (Cupressus sempervirens var. horizontalis) in Eshkevar of Rahimabad, Rudsar, Guilan province}, journal = {Forest and Wood Products}, volume = {73}, number = {2}, pages = {247-258}, year = {2020}, publisher = {University of Tehran}, issn = {5052-2008}, eissn = {2383-0530}, doi = {10.22059/jfwp.2020.293787.1046}, abstract = {Plant distribution in forest ecosystems is not accidental and influenced by various factors. This study was done to investigate the structure, physiognomy and site requirements of Mediterranean cypress species (Cupressus sempervirens var. horizontalis) in order to achieve the basic structure, physiognomy and site requirements information of this species relative to soil and physiographic factors in Eshkevar, Rahimabad, Rudsar. For this purpose, 25 circular plots, each one with 1000-m2, were located according to random sampling. In each plot, type of tree and shrub species were designated; then, diameter at breast height (DBH) of trees more than 7.5 cm was measured. In each plot, soil sample were taken from 0 to 10 cm depth. The results indicated that stand structure was uneven-aged. Physiognomy studies showed that in tree, shrub, and herbaceous layers, broad- leaved and need-leaved trees, deciduous shrubs, and forbs were, respectively, dominance life forms. Between environmental factors, aspect and soil textures were effective on diameter, height and individual number of Mediterranean cypress. Number of species had a positive and negative correlation with sand percentage and aspect, respectively.}, keywords = {Composition,Environmental factor,Physiognomy,Cupressus sempervirens,Hyrcanian forests}, title_fa = {بررسی ساختار، فیزیونومی و نیازهای رویشگاهی گونۀ زربین (Cupressus sempervirens var. horizontalis) در منطقۀ اشکور رحیم‌آباد رودسر، استان گیلان}, abstract_fa = {شناخت ساختار وضعیت جنگل‌ها به‌ویژه اکوسیستم‌های جنگلی که در ارتفاعات فوقانی با عوامل تهدیدکننده از جمله شرایط سخت کلیماتیک و فرسایش خاک مواجه‌اند، ضرورتی انکارناپذیر است. این مطالعه به‌منظور بررسی ساختار، فیزیونومیک و نیازهای رویشگاهی گونۀ زربین (Cupressus sempervirens L. f. horizontalis (Mill.)) با هدف دستیابی به اطلاعات پایۀ این گونه نسبت به عوامل خاکی و فیزیوگرافی در منطقۀ اشکور رحیم‌آباد رودسر انجام گرفت. به این منظور، 30 قطعه‌‌نمونۀ دایره‌ای‌ شکل هریک به مساحت 1000 متر مربع با استفاده از روش انتخابی برداشت و در داخل هریک از قطعات نمونۀ قطر تمام گونه‌های درختی با قطر برابرسینه بیشتر از 5/7 سانتی‌متر اندازه‌گیری شد. همچنین گونه‌های درختچه‌ای داخل قطعات نمونه شمارش شد. از هر قطعه‌نمونه یک نمونه خاک (به‌عنوان نمونۀ خاک معرف) از عمق صفر تا 10 سانتی‌متر برداشت شد. نتایج نشان داد که ساختار تودۀ جنگلی ناهمسال بود. در لایۀ درختی شکل‌های رویشی سوزنی‌برگ و پهن‌برگ، در لایۀ درختچه‌ای درختچه‌های خزان‌کننده و در لایۀ علفی نیز گیاهان علفی غیرگندمی غالب بودند. در بین عوامل محیطی جهت جغرافیایی و بافت خاک بر روی قطر، ارتفاع و تراکم گونۀ زربین مؤثر بودند. تراکم درختان (تعداد در هکتار) همبستگی مثبت و منفی معنی‌داری را به‌ترتیب با درصد شن و جهت جغرافیایی نشان دادند. بیشترین پراکنش این گونه نیز در دامنه‌های خشک جنوبی مشاهده شد و سایر جهات تراکم کمتری از این گونه را به خود اختصاص دادند.}, keywords_fa = {جنگل‌های هیرکانی,زربین,ساختار,عوامل محیطی,فیزیونومی}, url = {https://jfwp.ut.ac.ir/article_77465.html}, eprint = {https://jfwp.ut.ac.ir/article_77465_4cc60ff94ba8e527481f507b4bd7598d.pdf} }